Tuesday, May 02, 2006
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: Indentation Solution (Strong)
MSDS No.: ISS3
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
1
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
2 1
Emergency Contact: CHEMTREC
OX
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
2
1
Last Update: 01-28-2008 Expiration Date:
1
X Liquid Gas Solid
Chemical State:
H
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
56815 Glycerine 57.6 5 mg/m3 10 mg/m3 390 F
7553562 Iodine 4 1 mg/m3 1 mg/m3 0.1 mg/m
7681110 Potassium iodide 12 NE NE 680 C
7732185 Water 26.4 None None 212 F
III. Hazardous Identification:
Hazard Category:
X Acute X Chronic Fire Pressure Reactive
Hazardous Identification Information:
Oxidizer. Respiratory and digestive tract irritant. Skin irritant. Severe eye irritant. May have adverse fetal effects.
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Chronic: Iodism, skin burns
Signs and Symptoms:
Ingestion: Nausea, vomiting, diarrhea
Skin: Inflammation, itching, scaling, reddening, occasional blistering
Eyes: Inflammation, redness, watering, itching
Iodism: Salivation, nasal discharge, sneezing, conjunctivitis, fever, laryngitis, bronchitis, stomatitis, skin rashes
Medical Conditions Generally Aggravated by Exposure:
Tuesday, May 02, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: Indentation Solution (Strong)
MSDS No.: ISS3
Skin, eye, respiratory diseases
Emergency and First Aid Procedures:
Inhalation: Remove to fresh air. If breathing becomes difficult, give oxygen (To be administered by qualified medical personnel
only!) If breathing stops, perform artificial respiration. Seek medical attention.
Ingestion: If victim is conscious and alert, give large quantities of water or milk. (Never give anything by mouth to an
unconscious person!) DO NOT induce vomiting unless directed to do so by medical personnel. If vomiting occurs, lower the
head so that the vomit will not re-enter the mouth and throat. Seek medical attention.
Skin: Wash with soap and water. Remove contaminated clothing. If irritation occurs, seek medical attention.
Eyes: Rinse with plenty of water for 15 minutes and seek medical attention. DO NOT use an eye ointment.
Convulsions: Do not restrain the victim, but do remove objects with which they might injure themselves; or, orient the victim to
prevent them from striking fixed heavy objects. If the convulsions cease, turn the victim on their side or face down, so that any
fluid in the mouth can drain.
Other Health Warnings:
V. Fire Fighting Measures:
Flash Point: 390 F Lower Explosive Limit: NE Upper Explosive Limit: NE
F.P. Method:
Fire Extinguishing Media: Water fog or fine spray, carbon dioxide, dry chemical, foam
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing. DO NOT use straight streams of water--will spread fire.
Unusual Fire and Explosion:
Violent steam generation or eruption may occur upon application of direct water stream.
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
DO NOT touch spilled material. Wear vapor respirator, safety goggles, and rubber gloves. Remove sources of ignition (i.e. open
flames, sparks). Stop leak if without risk. Dike if necessary. Cover and soak up with inert absorbent material (do not use
flammable substances such as sawdust). Dispose according to local, state, and federal regulations.
VII. Handling and Storage:
Precautions to be Taken:
Keep in closed container. Maintain temperature between 64-130 F. Keep cool and dry. Avoid ignition sources (heat, open flame,
spark). Avoid incompatible materials. Use only in well-ventilated areas. Avoid inhalation and ingestion. Avoid contact with skin,
eyes, and clothing. Wash thoroughly after handling.
Other Precautions:
DO NOT wear contact lenses while using this product.
Tuesday, May 02, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: Indentation Solution (Strong)
MSDS No.: ISS3
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Use only in well-ventilated areas.
Personal Protective Equipment:
Safety goggles, gloves, vapor respirator, protective clothing
IX. Physical and Chemical Properties:
Boiling Point: ~340 F Melting Point: 64 F
Evaporation Rate (Butyl Acetate = 1): NE Vapor Pressure (mm Hg.): 3
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): 3.1
Solubility In Water: Miscible Appearance and Odor:
Other Information:
X. Stability and Reactivity:
Stability:
Stable under normal temperatures and pressures
Incompatibility (Materials to Avoid):
Strong oxidizing agents, alkaloid salts, chloral hydrate, calomel (mercurous chloride), potassium chlorate, metallic salts, acids,
bromine trifluoride, fluorine perchlorate, combustible materials, organic materials, metals
Decomposition/By Products:
Aldehydes, carbon monoxide and dioxide, acrolein, potassium oxides, iodine
Hazardous Polymerization:
Will not occur.
XI. Toxicological Information:
Chronic ingestion of iodides during pregnancy has resulted in fetal death, severe goiter, and cretinoid appearance of the newborn.
XII. Ecological Information:
Prevent from entering sewers or waterways. May be toxic to some aquatic life.
XIII. Disposal Considerations:
Dispose according to local, state, and federal regulations.
XIV. Transport Information:
Keep in closed container. Maintain temperature between 64-130 F. Keep cool and dry. Avoid ignition sources (heat, open flame,
spark). Avoid incompatible materials. Avoid inhalation and ingestion. Avoid contact with skin, eyes, and clothing. Wash thoroughly
after handling.
Tuesday, May 02, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: Indentation Solution (Strong)
MSDS No.: ISS3
XV. Regulatory Information:
Potassium iodide and iodine are listed on the TSCA inventory.
Iodine is hazardous by definition of OSHA Hazard Communication Standard (29 CFR 1910.1200).
XVI. Other Information:
Using this product under normal, properly instructed procedures should not be hazardous.
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|