Monday, May 08, 2006
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: Laser Hazer
MSDS No.: LTF100S
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
4
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
1 0
Emergency Contact: CHEMTREC
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
1
4
Last Update: 2-4-2008 Expiration Date:
0
X
Liquid Gas Solid
Chemical State:
Pure Mixture
Chemical Type: X
II. Ingredients:
X Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
Hydrocarbon propellants Not disclosed
Medicinal Mineral Oil Not disclosed
III. Hazardous Identification:
Hazard Category:
Acute X Chronic X Fire X Pressure Reactive
Hazardous Identification Information:
Flammable gas. Contents under pressure.
Chronic: Animal studies indicate that repeated or prolonged exposure may result in mild irritation.
IV. First Aid Measures:
Route(s) of Entry:
Eyes, Skin, Inhalation, Ingestion
Health Hazards (Acute and Chronic):
Chronic: May be mildly irritating.
Signs and Symptoms:
None listed
Medical Conditions Generally Aggravated by Exposure:
None known.
Emergency and First Aid Procedures:
Monday, May 08, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: Laser Hazer
MSDS No.: LTF100S
Eyes: Flush with water for at least 15 minutes being certain to lift eyelids.
Skin: Wash with soapy water.
Inhalation: Remove to fresh air. Acute exposure may result in mild bronchial irritation.
Ingestion: Since this is an aerosol product, ingestion is unlikely. No special recommendations if ingested.
Other Health Warnings:
If irritation develops, contact a physician.
V. Fire Fighting Measures:
Flash Point: 140掳 F (60掳 C) Lower Explosive Limit: 1.9 Upper Explosive Limit: 9.5
F.P. Method:
Fire Extinguishing Media: Contains hydrocarbon oil and gas propellants. Use water spray to cool containers.
Special Fire Fighting Procedures:
None recommended
Unusual Fire and Explosion:
Containers may rupture with force. Extinguish surrounding fire and keep containers cool using maximum distance possible.
Contents under pressure.
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Clean up residue with soapy water.
VII. Handling and Storage:
Precautions to be Taken:
Store at room temperature.
Other Precautions:
None
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Normal ventilation.
Personal Protective Equipment:
None required.
Monday, May 08, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: Laser Hazer
MSDS No.: LTF100S
IX. Physical and Chemical Properties:
Boiling Point: 43.8掳 F Melting Point: N/A
Evaporation Rate (Butyl Acetate = 1): 1.4 Vapor Pressure (mm Hg.): 1206 mmHG
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): 1.7
Solubility In Water: Insoluble Appearance and Odor:
Other Information:
X. Stability and Reactivity:
Stability:
Normally stable
Incompatibility (Materials to Avoid):
Oxidizing materials
Decomposition/By Products:
Oxides of carbon
Hazardous Polymerization:
Will not occur
XI. Toxicological Information:
Non-toxic, non-carcinogenic. Not listed with OSHA, NTP, IARC.
XII. Ecological Information:
Not harmful to the environment.
XIII. Disposal Considerations:
Do not puncture or incinerate containers.
"Empty" containers may contain product residue and may be dangerous. Empty containers should be completely drained and
bunged, and then disposed of according to local, state, and federal regulations.
XIV. Transport Information:
IATA
Shipping name: Aerosols, Flammable
Hazard class: 2.1
UN no.: 1950
Packing group:
XV. Regulatory Information:
Flammable Gas
Monday, May 08, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: Laser Hazer
MSDS No.: LTF100S
XVI. Other Information:
Using this product under normal, properly instructed procedures should not be hazardous.
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|