Thursday, April 27, 2006
Page 1 of 3
MSDS - Material Safety Data Sheet
Product Name: Hard Core Blue Impression Compound
MSDS No.: HCB100/Z
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
0
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
1 0
Emergency Contact: CHEMTREC
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
1
0
Last Update: 01-28-2008 Expiration Date:
0
X
Liquid Gas Solid
Chemical State:
E
Pure Mixture
Chemical Type: X
II. Ingredients:
X Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
7778189 Calcium sulfate hemihydrate >95
14808607 Silica (quartz) <5 0.1 mg/m3 0.1 mg/m3 0.05/m3
III. Hazardous Identification:
Hazard Category:
X Acute X Chronic Fire Pressure Reactive
Hazardous Identification Information:
Respiratory tract irritant. Eye irritant.
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Inhalation of excessive dust over a prolonged period can result in lung damage.
Signs and Symptoms:
Acute exposure: Cough, tightness in chest, shortness of breath, wheezing, sputum production
Medical Conditions Generally Aggravated by Exposure:
Skin, eye, respiratory
Emergency and First Aid Procedures:
This product has no known acute toxic effects which would require emergency first aid measuires.Skin: Wash with soap and
water. If irritation occurs, seek medical attention.Eyes: Rinse with plenty of water for 15 minutes. Seek medical attention if
condition warrants.
Thursday, April 27, 2006
Page 2 of 3
MSDS - Material Safety Data Sheet
Product Name: Hard Core Blue Impression Compound
MSDS No.: HCB100/Z
Other Health Warnings:
Smoking aggravates the effects of exposure.
V. Fire Fighting Measures:
Flash Point: NE Lower Explosive Limit: NE Upper Explosive Limit: NE
F.P. Method:
Fire Extinguishing Media: Non-flammable. Use whatever is appropriate for surrounding fire. Water will cause the product to solidify.
Special Fire Fighting Procedures:
None
Unusual Fire and Explosion:
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Vacuum spilled material. Avoid creating dust. Wipe surfaces with damp cloth.
Avoid washing down drains as material may solidify.
VII. Handling and Storage:
Precautions to be Taken:
Keep in closed container. Keep cool and dry. Use only in well-ventilated areas. Avoid dust generation and accumulation. Avoid
eye contact. Avoid inhalation. Wash thoroughly after handling.
Other Precautions:
Handling: No special treatment required
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Use only in well-ventilated areas.
Personal Protective Equipment:
Safety goggles; cloth, rubber, or leather gloves; dust respirator
IX. Physical and Chemical Properties:
Boiling Point: NE Melting Point: 1450C
Evaporation Rate (Butyl Acetate = 1): NE Vapor Pressure (mm Hg.): NE
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): NA
Solubility In Water: 1.3 Appearance and Odor:
Other Information:
Thursday, April 27, 2006
Page 3 of 3
MSDS - Material Safety Data Sheet
Product Name: Hard Core Blue Impression Compound
MSDS No.: HCB100/Z
X. Stability and Reactivity:
Stability:
Stable. May solidify and generate heat if in contact with water.
Incompatibility (Materials to Avoid):
High humidity.
Decomposition/By Products:
Will decompose above 1450 C.
Hazardous Polymerization:
Will not occur.
XI. Toxicological Information:
Route of Entry: Inhalation
Effects of exposure: None known.
Inhalation of dust over prolongered periods can result in lung damage.
XII. Ecological Information:
No ecotoxilogical studies are available. Generally considered inert in the environment. Not dangerous to water.
XIII. Disposal Considerations:
Dispose according to local, state, and federal regulations. Avoid washing down drains as it may solidify.
XIV. Transport Information:
No special transportation requirements, nondangerous goods.
XV. Regulatory Information:
SARA III: These products contain no ingredients on the extremely hazardous CERCLA, or section 313 lists.
XVI. Other Information:
This MSDS may also be used for cataloge nos. HCB2/3001.
Using this product under normal, properly instructed procedures should not be hazardous.
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|