Monday, May 08, 2006
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: IoFume Instant Vaporizer
MSDS No.: LPF1000
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
0
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
3 0
Emergency Contact: CHEMTREC
OX
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
3
0
Last Update: 2-4-2008 Expiration Date:
0
X
Liquid Gas Solid
Chemical State:
F
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
7553562 Iodine 1 mg/m3 1 mg/m3 0.1 mg/m
III. Hazardous Identification:
Hazard Category:
X Acute X Chronic Fire Pressure Reactive
Hazardous Identification Information:
Oxidizer. May be harmful if inhaled, ingested, or contacted by skin or eyes. Respiratory irritant. May be corrosive to skin and
eyes.
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Acute: Skin burns
Signs and Symptoms:
Skin: Inflammation, itching, scaling, reddening, blistering
Eyes: Inflammation, redness, watering, itching
Medical Conditions Generally Aggravated by Exposure:
Skin, eye, respiratory diseases
Emergency and First Aid Procedures:
Monday, May 08, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: IoFume Instant Vaporizer
MSDS No.: LPF1000
Inhalation: Remove to fresh air. If breathing becomes difficult, give oxygen (To be administered by qualified medical personnel
only!) If breathing stops, perform artificial respiration. Allow victim to rest. Seek medical attention.
Ingestion: If victim is conscious and alert, give large quantities of water or milk. (Never give anything by mouth to an
unconscious person!) Induce vomiting. Lower the head so that the vomit will not re-enter the mouth and throat. Seek medical
attention.
Skin: Wash with soap and water. Cover the affected area with an emollient. Seek medical attention.
Eyes: Rinse with plenty of water for 15 minutes and seek medical attention. DO NOT use an eye ointment.
Convulsions: Do not restrain the victim, but do remove objects with which they might injure themselves; or, orient the victim to
prevent them from striking fixed heavy objects. If the convulsions cease, turn the victim on their side or face down, so that any
fluid in the mouth can drain.
Other Health Warnings:
V. Fire Fighting Measures:
Flash Point: NE Lower Explosive Limit: NE Upper Explosive Limit: NE
F.P. Method:
Fire Extinguishing Media: Use proper extinguishing media suitable for surrounding fire.
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing.
Unusual Fire and Explosion:
Oxidizer--contact with combustible materials may cause a fire.
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Wear dust respirator, safety goggles, and rubber gloves. Prevent contact with combustible material. Stop leak if without risk. Dike
if needed. Keep substance damp with water spray. Sweep up and place in bag or vacuum up with proper filter equipped
instrument. Avoid creating dust. Dispose according to local, state, and federal regulations.
VII. Handling and Storage:
Precautions to be Taken:
Keep in closed container. Avoid ignition sources (heat, open flame, spark). Avoid incompatible materials. Use only in
well-ventilated areas. Avoid dust generation and accumulation. Avoid contact with skin and eyes. Do not ingest or breathe dust.
Wash thoroughly after handling.
Other Precautions:
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Use only in well-ventilated areas.
Personal Protective Equipment:
Safety goggles, gloves, dust respirator, protective clothing
Monday, May 08, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: IoFume Instant Vaporizer
MSDS No.: LPF1000
IX. Physical and Chemical Properties:
Boiling Point: 363.2 F Melting Point: 237.2 F
Evaporation Rate (Butyl Acetate = 1): NE Vapor Pressure (mm Hg.): 0.305
Specific Gravity (H20 = 1): Vapor Density (AIR = 1): 8.8
Solubility In Water: Very slightly Appearance and Odor:
Other Information: * Appearance & Odor: Purple solid with dark metallic luster; strong characteristic odor
X. Stability and Reactivity:
Stability:
Stable
Incompatibility (Materials to Avoid):
Combustible material, organic material, metals
Decomposition/By Products:
Hazardous Polymerization:
Does not occur.
XI. Toxicological Information:
XII. Ecological Information:
Prevent from entering sewers or waterways. May be toxic to some aquatic life.
XIII. Disposal Considerations:
Dispose according to local, state, and federal regulations.
XIV. Transport Information:
Keep in closed container. Avoid ignition sources (heat, open flame, spark). Avoid incompatible materials. Avoid dust generation
and accumulation. Avoid contact with skin and eyes. Do not ingest or breathe dust. Wash thoroughly after handling.
XV. Regulatory Information:
Iodine is listed on the TSCA inventory.
Iodine is hazardous by definition of OSHA Hazard Communication Standard (29 CFR 1910.1200).
XVI. Other Information:
Using this product under normal, properly instructed procedures should not be hazardous.
Monday, May 08, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: IoFume Instant Vaporizer
MSDS No.: LPF1000
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|