QUICKCABLE
Material Safety Data Sheet (MSDS)
Description: NON-Ammoniated Glass Cleaner Part Number: 510450
SECTION I
Date: April 2006 Emergency Telephone 1-800-468-1263(INFOTRAC)
Quick Cable Corporation
3700 Quick Drive Quick Cable Product ID: 510450
Franksville, WI 53126 Telephone: 1-800-558-8667
SECTION II
HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous
Components CAS # ACGIH OSHA Range Percent Skin
Specific Chemical by weight
TLV PEL
Identity
Propane / isobutane 68476-86-8 800ppm 800ppm < 10.0% Yes
/ n-butane
2- Butoxyethanol 111-76-2 25 ppm skin 50ppm skin < 5.0% No
Ethanol- A2 64-17-5 N.E. N.E. N.E. N.E.
Hexanone 108-10-1 N.E. N.E. N.E. N.E.
Methyl Alcohol 67-56-1 N.E. N.E. N.E. N.E.
Water 7732-18-5 N.E. N.E. N.E. N.E.
SECTION III
PHYSICAL/CHEMICAL CHARACTERISTICS
Appearance and Odor: Colorless, Pleasant Specific Gravity: 0.9429
Solubility in water: Complete Vapor Density: Is heavier than air
Vapor Pressure: 25-35
Freezing Point: 32掳F
Physical State: Aerosol
Boiling Point: - 43 鈥? 340掳 F
PH @ 100%: 9.00
Evaporation Rate: Is faster than Butyl Acetate
Coefficient of water/oil distribution: Complete
SECTION IV
FIRE AND EXPLOSION HAZARD DATA
Special fire fighting procedures: Containers can build up
Flash Point: - 156掳F
pressure if exposed to heat (fire). As in any fire, wear self-
Extinguishing Media: Alcohol Foam, CO2, Dry
contained breathing apparatus pressure-demand
Chemical, Foam, Water Fog
(MSHA/NIOSH approved or equivalent) and full protective
Unusual fire and Explosion Conditions: 鈥淓mpty鈥?
gear.
containers retain product residue (liquid and/or
Vapor) and can be dangerous. DO NOT
LEL: 1.1% UEL: 10.6%
PRESSURIZE, CUT, WELD, BRAZE, SOLDER,
DRILL, GRIND, OR EXPOSE SUCH CONTAINERS
TO HEAT, FLAME, SPARKS, STAIC ELECTRICITY,
OR OTHER SOURCESOF IGNITION; THEY MAY
DANGER: EXTREMELY FLAMMABLE
EXPLODE AND CAUSE INJURY OR DEATH.
SECTION V
REACTIVITY DATA
Stability: Stable under normal storage conditions
Conditions to avoid: All sources of ignition, Welding Arcs, and Open Flames
Hazardous Decomposition Products: Oxides of Carbon, Oxides of Nitrogen, and may produce forms of Chloride,
Chlorine, and Phosgene
Chemical Incompatibilities: Strong Acids, Alkalis, Oxidizers, and Amines
Hazardous Polymerization: Will not occur under normal storage conditions.
SECTION VI
HEALTH HAZARD DATA
Primary Route(s) of Entry: Skin Contact, Inhalation, ingestion, Eye Contact
Signs and symptoms of exposure: Skin Contact: Prolonged or repeated contact can result in defatting and
drying of the skin, which may result in skin irritation and Dermatitis (rash). Inhalation: Headaches, dizziness,
nausea, decreased blood pressure, changes in heart rate and cyanosis may result from over-exposure to vapor
or skin exposure. Prolonged inhalation may be harmful. Ingestion: This material may be harmful or fatal if
swallowed. Eye Contact: Liquid, aerosols and Vapors of this product are irritating and can cause pain, tearing,
reddening and swelling accompanied by a stinging sensation and/or feeling like that of a fine dust in the eyes.
Chronic Overexposure: Overexposure may cause nervous system damage.
Emergency and First Aid Procedures: (If systems persist contact a physician)
Eye Contact: Immediately flush eyes with plenty of water. Get medical attention if irritation persists.
Skin Contact: Immediately flush skin with plenty of water. Remove clothing. Get medical attention Immediately.
Wash clothing separate before reuse.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult give oxygen.
Get immediate medical attention.
Ingestion: Get Medical attention immediately. If swallowed, do NOT induce vomiting. Give victim a glass of
water or milk. Call a physician or poison control center immediately. Never give anything by mouth to an
unconscious person.
SECTION VII
PRECAUTIONS FOR SAFE HANDLING AND USE
Steps Taken in case material is released or spilled: Absorb spill with inert material (e.g. dry sand or Earth),
then place in a chemical waste container. Avoid runoff into storm sewers and ditches, which lead to Waterways.
Waste Disposal Method: dispose in accordance with all Federal, State, and Local regulations.
Precautions to be taken in handling and storing: Wash thoroughly after handling. Keep from freezing.
SECTION VIII
CONTROL MEASURES
Respiratory Protection (Specific Type): A respiratory protection program that meets OSHA 1910.134 and
ASNI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator鈥檚 use.
Ventilation: Local exhaust ventilation may be necessary to control any air contaminants to within their TLVs
during the use of this product.
Protective Clothing: Standard industrial Clothing standards should be followed.
Eye and Face Protection: Wear safety glasses with side shield (or goggles) and other protective equipment.
Work Hygienic Practices: Wash hands before eating. Remove contaminated clothing and wash before reuse.
Use only in a well ventilated area. Follow all MSDS/label precautions even after the container is emptied
because they may retain product residues. Avoid prolonged or repeated contact with eyes, skin, and clothing.
SECTION IX
OTHER REGULATORY INFORMATION
HMIS
Health (Blue) 1
Flammability (Red) 4
Reactivity (Yellow) 0
SARA Title III: Section 311/312: Immediate health Hazard, Chronic Health Hazard, Fire Hazard, Pressurized Gas Hazard
Section 313: 2-Butoxyethanol
TSCA 12(B): Ethanol-A2, Methyl Alcohol, Hexanone
California Proposition 65: No proposition 65 chemicals exist in this product.
Canadian WHMIS Class: This MSDS has been prepared in compliance with Controlled Product Regulations.
New Jersey / Pennsylvania Right-to-Know: The following Materials are non hazardous ingredients At greater than 3% and is among
the top five ingredients: WATER CAS# 7732-18-5
This information is accurate to the best of Quick Cable Corporation鈥檚 knowledge or obtained from sources believed by Quick Cable to be
accurate. Before using any product, read all warnings and directions on the label.
|