Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: airmac_com---msds_lamson_5_grease.asp
                                                                                                                         H.M.I.S.
Health: 1
Flammability: 1

Material Safety Data Sheet Reactivity: 0
These ratings should be
used only as a part of a fully
implemented H.M.I.S.
program.
Section I - Product Identification
Trade Name and Synonyms Part Numbers:
Gardner Denver Lamson No. 5 BC3017120000, BC3017150000 Health Emergency Phone Number
Lubricating Grease BC3017220000, BC3017250000
(217) 222-5400
Manufacturer鈥檚 Name
Safety Department
Gardner Denver, Inc.
Address
100 Gardner Park Peachtree City, GA 30269
Transport Emergency Phone Number
Product Identification
(800) 424-9300 (CHEMTREC)
Centrifugal Blower Lubricant
Chemical Names and Synonyms Use or Description



Section II - Composition/Information on Ingredients
Components Material CAS Number %
Hydrotreated Heavy Paraffinic Distallates 64742547 >80
Polyurea Thickeners <10
Additives <10
All the components of this material are on the Toxic Substances Control Act Chemical Substances Inventory.
This product fits the ACGIH definition for mineral oil mist. The ACGIH TLV is 5 mg/m3, the OSHA PEL is 5 mg/m3.


Section III - Chemical and Physical Properties
Appearance: Specific Gravity:
Green grease .92 @ 20/20C
Vapor Pressure:
Odor: <1 mm Hg @ 40C
Vapor Density: Solubility in Water:
(AIR=1) NA In hydrocarbon solvents;
insoluble in water
Boiling Point: Density:
NDA
% Volatiles: Evaporation Rate:
<1.0 (wt. %), 9.2 g/l approx. NA

Section IV - Hazards Identification
POTENTIAL HEALTH EFFECTS:
EYE: Not expected to cause prolonged significant eye irritation.

SKIN: Contact with the skin is not expected to cause prolonged or significant irritation. May cause skin
discoloration. Not expected to be harmful to internal organs if absorbed through the skin. High-
Pressure Equipment Information: Accidental high-velocity injection under the skin of materials of
this type may result in serious injury. Seek medical attention at once should an accident like this
occur. The initial wound at the injection site may not appear to be serious at first; but, if left
untreated, could result in disfigurement or amputation of the affected part.
INGESTION: Not expected to be harmful if swallowed.
INHALATION:: Contains a petroleum-based mineral oil. May cause respiratory irritation or other pulmonary
effects following prolonged or repeated inhalation of oil mist at airborne levels above the
recommended mineral oil mist exposure limit.

Section V - First Aid Measures
Eye Contact: No specific first aid measures are required because this material is not expected to cause eye
irritation. As a precaution remove contact lenses, if worn, and flush eyes with water.
Skin Contact: No specific first aid measures are required because this material is not expected to be harmful if it
contacts the skin. As a precaution, remove clothing and shoes if contaminated. Use a waterless
hand cleaner, mineral oil, or petroleum jelly to remove the material. Then wash skin with soap
and water. Wash or clean contaminated clothing and shoes before reuse.
Gardner Denver Lamson No. 5 Lubricating Grease
Section V - First Aid Measures (con鈥檛)
Ingestion No specific first aid measures are required because this material is not expected to be harmful if
swallowed. DO NOT INDUCE VOMITING. As a precaution, give the person a glass of water or
milk to drink and get medical advice. Never give anything by mouth to an unconscious person.
Inhalation: If exposed to excessive levels of material in the air, move the exposed person to fresh air. Get
medical attention if coughing or respiratory discomfort occurs.
Note to Physician: In an accident involving high-pressure equipment, this product may be injected under the skin. Such an
accident may result in a small, sometimes bloodless, puncture wound. However, because of its driving force, material injected into
a fingertip can be deposited in the palm of the hand. Within 24 hours, there is usually a great deal of swelling, discoloration, and
intense throbbing pain. Immediate treatment at a surgical emergency center is recommended.


Section VI - Fire Fighting Measures
Fire Classification: Not classified by OSHA as flammable or combustible.
>500oF
Flash Point:
Method:

Autoignition: NDA
Flammable Limits in Air, % by Volume
LEL NA
UEL NA
Extinguishing Media: C02, Dry Chemical, Foam, Water Fog
Fire Fighting Instructions: This material will burn although it is not easily ignited.
NFPA Ratings: Health 1; Flammability 1; Reactivity 0.
Combustion products: Normal combustion forms carbon dioxide, water vapor and may produce oxides of nitrogen.
Incomplete combustion can produce carbon monoxide.


Section VII - Stability and Reactivity
Chemical Stability: Stable.
Conditions to Avoid: No data available.
Incompatibility with other May react with strong oxidizing agents, such as chlorates, nitrates, peroxides, etc.
Materials:
Hazardous Decomposition: No data available.
Hazardous Polymerization: Polymerization will not occur.


Section VIII - Accidental Release Measures
Spill Clean-Up: Clean up spills immediately, observing precautions in Exposure Controls/Personal Protection
section.


Section IX - Handling and Storage
Handling (Physical Drum is not designed to contain pressure. Do not use pressure to empty drum or drum may
Aspects): rupture with explosive force. Empty containers retain product residue (solid, liquid, and/or vapor)
and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such
containers to heat, flame, sparks, static electricity, or other sources of ignition. They may explode
and cause injury or death. Empty drums should be completely drained, properly bunged, and
promptly returned to a drum re-conditioner, or properly disposed of. Avoid contaminating soil or
releasing this material into sewage and drainage systems and bodies of water.

Section X - Exposure Controls/Personal Protection
ENGINEERING CONTROLS:
Use in a well-ventilated area. If user operations generate an oil mist, use process enclosures,
Ventilation:
local exhaust ventilation, or other engineering controls to control airborne levels below the
recommended mineral oil mist exposure limits.
PERSONAL PROTECTIVE EQUIPMENT:
Consider the potential hazards of this material (see Section 3), applicable exposure limits, job
General Considerations:
activities, and other substances in the work place when designing engineering controls and
selecting personal protective equipment. If engineering controls or work practices are not
adequate to prevent exposure to harmful levels of this material, the personal protective
equipment listed below is recommended. The user should read and understand all instructions
and limitations supplied with the equipment since protection is usually provided for a limited time
or under certain circumstances.
Gardner Denver Lamson No. 5 Lubricating Grease
Section X - Exposure Controls/Personal Protection (con鈥檛)
Eye Protection: No special eye protection is normally required.
Skin Protection No special protective clothing is normally necessary.
Respiratory No respiratory protection is normally required. If user operations generate an oil mist, determine
Protection: if airborne concentrations are below the recommended mineral oil mist exposure limits. If not
wear a NIOSH approved respirator that provides adequate protection from measured
concentrations of this material. Use the following elements for air-purifying respirators :
particulate.

Section XI - Toxicological Information
Animal Data: Eye Effects: The mean 24-hour Draize eye irritation score in rabbits is 1.67/110.
Skin Effect: For a 4-hour exposure, the Primary Irritation Index (PII) in rabbits is: 1.3. The acute
dermal LD50 in rats is >5.0 g/kg. This material did not cause sensitization reactions in a Modified
Buehler guinea pig test.
Acute Inhalation Effects: The acute respiratory toxicity is based on data for a similar material.
Additional Toxicology information: This product contains petroleum base oils which may be
refined by various processes including severe solvent extraction, severe hydrocracking, or severe
hydrotreating. None of the oils requires a cancer warning under the OSHA Hazard
Communication Standard (29 CFR 1910.1200). These oils have not been listed in the National
Toxicology Program (NTP) Annual Report nor have they been classified by the International
Agency for Research on Cancer (IRAC) as carcinogenic to human (Group 1), probably
carcinogenic to human (Group 2A), or possibly carcinogenic to humans (Group 2B).


Section XII - Ecological Information
Ecotoxicity Information: No data available.
Environmental Fate: This material is not expected to be readily biodegradable.


Section XIII - Disposal Considerations
Waste Disposal: Oil collection services are available for used oil recycling or disposal. Place contaminated
materials in containers and dispose of in a manner consistent with applicable regulations.
Contact your sales representative or local environmental or health authorities for approved
disposal or recycling methods.


Section XIV - Transportation Information
Shipping Information: DOT Shipping Name 鈥? none
DOT Hazard Class 鈥? none
DOT Identification Number 鈥? none
DOT Packing Group 鈥? n/a
Additional Information: Petroleum Lubricating Grease 鈥? not hazardous by US DOT.
ADR/RID Hazard Class 鈥? Not applicable.

Section XV - Regulatory Information
U.S. FEDERAL REGULATIONS:
1. Immediate (Acute) Health Effects: NO
SARA 311 Categories: 2. Delayed (Chronic) Health Effects: NO
3. Fire Hazard: NO
4. Sudden Release of Pressure Hazard: NO
5. Reactivity Hazard: NO
Regulatory Lists 01=SARA 313 11=NJ RTK 22=TSCA Sect 5(a) (2)
Searched: 02=MASS RTK 12=CERCLA 302.4 23=SCA Sect 6
03=NTP Carcinogen 13=MN RTK 24=TSCA Sect 12 (b)
04=CA Prop 65-Carcin 14=ACGIH TWA 25=TSCA Sect 8 (a)
05=CA Prop 65-Repro Tox 15=ACGIH STEL 26=TSCA Sect 8 (d)
06-IARC Group 1 16=ACGIH Calc TLV 27=TSCA Sect 4 (a)
07=IARC Group 2A 17=OSHA PEL 28=Canadian WHMIS
08=IARC Group 2B 18=DOT Marine Pollutant 29=OSHA CEILING
09=SARA 302/304 19=Chevron TWA 30=Chevron STEL
10=PA RTK 20=EPA Carcinogen
Gardner Denver Lamson No. 5 Lubricating Grease
Section XV - Regulatory Information (con鈥檛)

The following components of this material are found on the regulatory lists indicated.
Distillates, Hydrotreated Found on lists 鈥? 14, 15, 17
Heavy Paraffinic:
EU Risk and Safety May cause long-term adverse effects in the aquatic environment.
Label Phrases:
New Jersey RTK Under the New Jersey Right-to-Know Act L. 1983 Chapter 315 .J.S.A. 34:5a-1 ET. SEQ., THE
Classification: PRODUCT IS TO BE IDENTIFIED AS FOLLOWS: PETROLEUM OIL (Grease).

CANADIAN This product is not considered a controlled product according to the criteria of the
REGULATIONS: Canadian Controlled Products Regulations.


Section XVI - Other Information
NOTE: This product or any other hydrocarbon-based lubricant should not be used in non-diaphragm compressors
that produce 鈥渂reathing air鈥? unless the outlet is monitored continuously for carbon monoxide. These lubricants can
produce carbon monoxide when subjected to high temperatures.

NFPA, NPCA-HMIS:
NFPA Rating:

Health 1
Flammability 1
Reactivity 0
NPCA-HMIS Rating:
Health 1
Flammability 1
Reactivity 0
Personal Protection Equipment Index recommendation, *- Chronic Effect Indicator. These values are obtained using the
guidelines or published evaluations prepared by the National Fire Protection Association (NFPA) or the National Paint and
Coating Association (for HMIS ratings).

Revision statement: This revision was updated to address: Section 1 (Product Identification).




ABBREVIATIONS THAT MAY HAVE BEEN USED IN THIS DOCUMENT:

TLV 鈥? Threshold Limit Value TWA 鈥? Time Weighted Average
STEL 鈥? Short-term Exposure Limit TPQ 鈥? Threshold Planning Quantity
RQ 鈥? Reportable Quantity PEL 鈥? Permissible Exposure Limit
C鈥? Ceiling limit CAS 鈥? Chemical Abstract Service Number
A1-5 - Appendix A Categories () 鈥? Change Has Been Proposed
NDA 鈥? No Data Available NA 鈥? Not Applicable

Prepared according to the OSHA Hazard Communication Standard (29 CFR 1910.1200) and the ANSI MSDA Standard (Z400.1)
by the Toxicology and Health Risk Assessment Unit, CRTC, P.O. Box 1627, Richmond, CA 94804

The above information is based on the data of which we are aware and is believed to be correct as of the date hereof. Since this
information may be applied under conditions beyond our control and with which we may be unfamiliar and since data made
available subsequent of the date hereof may suggest modification of the information, we do not assume any responsibility for the
results of its use. This information is furnished upon condition that the person receiving it shall make his own determination of the
suitability of the material for his particular purpose.

May 2000 25.10.06 Version 2

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
abilityproducts_com_au---leviathan_matte_msds_.asp 1305-62-0 57-50-1 9005-46-3 65996-69-2 68131-74-8
abilityproducts_com_au---ma_abil_meld_abc_msds.asp 8002-43-5
abilityproducts_com_au---ma_admix2000_abc_msds.asp N/A
abilityproducts_com_au---ma_cemswift_abc_msds.asp 7632-00-0 6834-92-0
abilityproducts_com_au---ma_cosmodpu_camsds.asp 9084-06-4 7757-82-6 7732-18-5
abilityproducts_com_au---ma_cosmotrondpu_ca_pds.asp N/A
abilityproducts_com_au---ma_flyash_pds.asp N/A
abilityproducts_com_au---ma_groundgslag_pds_abc.asp N/A
abilityproducts_com_au---ma_maximair_msds.asp 68585-47-7
abilityproducts_com_au---ma_maxim_airpds.asp N/A
abilityproducts_com_au---ma_voideinpds.asp N/A
abilityproducts_com_au---the_paint_-ability-msds.asp 68131-74-8
abilityproducts_com_au---the_paint_pds_ability.asp N/A
abilityproducts_com_au---x55_hi-seal_info_bulletin1.asp N/A
abilityproducts_com_au---x55_hi_seal_paint-pds-abc.asp N/A
abilityproducts_com_au---_x55_hi-seal-ability-msds.asp N/A
accustandard_com---12_1600214-224.asp N/A
acrelectronics_com---msds-usa_f1000.asp N/A
acrelectronics_com---msds-usa_f900.asp N/A
acrelectronics_com---msds_11_li-mno2.asp 01-10-2 7439-93-2 1313-13-9 96-49-1 4437-85-8 110-71-4 33454-82-9
acrelectronics_com---msds_12_with_5__li-mno2_-_sr-102_radio.asp 01-10-2 7439-93-2 1313-13-9 96-49-1 4437-85-8 110-71-4
acrelectronics_com---msds_17_with_21_li-cmofl_-_rlb23-24_battery.asp 02-13-2 7439-93-2 5131-17-2 96-48-0 14283-07-9
acrelectronics_com---msds_20_with_4_li-cmofl_-_rlb_14_battery.asp 02-13-2 7439-93-2 5131-17-2 96-48-0 14283-07-9
acrelectronics_com---msds_28_with_5_5_-4c_li-mno2-sart.asp 02-13-2 7439-93-2 1313-13-9 109-99-9 7791-03-9
acrelectronics_com---msds_29_with_2__li-cmofl_-_mini-b.asp 01-10-2 7439-93-2 5131-17-2
acrelectronics_com---msds_32_3_d_li-mno2-elt.asp 01-10-2 7439-93-2 1313-13-9 109-99-9 7791-03-9
acrelectronics_com---msds_43_with_3_c_li-mno2.asp 02-13-2 7439-93-2 1313-13-9 109-99-9 108-32-7 110-71-4 7791-03-9 1333-86-4
acrelectronics_com---msds_44_with_1_li-so2_-_hemilight.asp 01-10-2 7439-93-2 7446-09-5 75-05-8
acrelectronics_com---msds_45_with_2_li-so2_-_sart_and_raft_light.asp 01-10-2 7439-93-2 7446-09-5
acrelectronics_com---msds_46_with_3_li-so2_-_plb.asp 01-10-2 7439-93-2 7446-09-5 75-05-8
acrelectronics_com---msds_4r1mb_mercury_battery_1035.asp 02-13-0 1313-13-9
acrelectronics_com---msds_53_5_d_li-so2-sart.asp 01-10-2 7439-93-2 7446-09-5 75-05-8
acrelectronics_com---msds_54_with_8_li-mno2_-_plb200.asp 01-10-2 7439-93-2 1313-13-9 96-49-1 4437-85-8
acrelectronics_com---msds_55_with_1_li-thionyl_chloride.asp 01-10-2 7439-93-2 7719-09-7 00744-67-0
acrelectronics_com---msds_56_svdr_lithium_sulfur_dioxide_batteries.asp 01-10-2 7439-93-2 7446-09-5 75-05-8
acrelectronics_com---msds_58_with_12__li-mno2_-_non_hazardous_epirb.asp 01-10-2 7439-93-2 1313-13-9 110-71-4
acrelectronics_com---msds_59_with_6_li-mno2_-_plb200_non_hazmat.asp 01-10-2 7439-93-2 1313-13-9 96-49-1 4437-85-8 110-71-4 33454-82-9
acrelectronics_com---msds_61_with_9__li-mno2_-_non_hazardous_rlb_32-33_epirb.asp 01-10-2 7439-93-2 1313-13-9 110-71-4
acrelectronics_com---msds_sentry_seal.asp N/A
acrelectronics_com---path3man.asp N/A
acrelectronics_com---sat2-rapid.asp N/A
airmac_com---msds_aeon_pd_grease.asp N/A
airmac_com---msds_ch_champ_lub.asp 64742-54-7 64742-53-6 64742-67-7 64742-95-3 64742-65-0
airmac_com---msds_ch_rotorlub_4000.asp N/A
airmac_com---msds_ch_rotorlub_8000.asp 68037-01-4
airmac_com---msds_gd_aeon_pd-fg.asp N/A
airmac_com---msds_gd_aeon_pd_oil.asp N/A
airmac_com---msds_lamson_5_grease.asp N/A
airmac_com---msds_md_axoil.asp N/A
airmac_com---msds_md_pneulube.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC