MATERIAL SAFETY DATA SHEET
In compliance with European directive 91/155/CEE
Product name: BETRONOL EP 214
1. Product and company identification
Product name: BETRONOL EP 214 n掳 49.1.
: Date revised :2005
Manufacturer / distributor :
DAC VISION
7 av. Joliot Curie - 17180 PERIGNY - FRANCE
Phone number. : +33 5 46 27 27 24 - Fax : +33 5 46 27 14 36 - dacvision.eu@dacvision.com
Emergency phone number: see item 16.
2. Composition, information on ingredients:
Water mixable coolant, use for lapping all prescription lens materials (CR39, mid & high index, polycarbonate鈥?).
Mineral oil and emulsion agents.
Chloride biphenyl, CPT, PDBB, phenol, chloride, secondary amines, zinc, Barium, and nitrites free.
3. Hazard identification
Inhalation: Not applicable.
Eye contact: Splashes may cause irritation
Skin contact: Prolonged contact may cause irritation and rashes
Ingestion: Ingestion may cause vomiting and stomach pains
Environment: See items 12 and 14
4. First aid measures :
Inhalation: 1-10% solution non irritant. In case of high concentration, bring to fresh air and lay. Get medical assistance if no quick recovering can be
observed
Eye contact: Wash immediately with cool running water for 15 minutes. Seek medical advice at once.
Skin contact: Wash immediately with cool running water or oil-dissolving hand wash cream. Seek medical advice at once
Ingestion: Do not provoke vomiting. Drink a lot of water. Seek medical advice at once
Environment: See items 12 and 13
5. Fire fighting measures
Extinguishing media: Water jet spread in fine particles, foam, CO2, sand, powder. Cool containers exposed to fire with water jet spread in fine particles
Inappropriate extinguishing media: Direct water jet is not appropriated.
Specific hazards: In the event of fire, the product can generate fumes and vapours like CO2, CO, SOx, and cracking organic agents.
Personal protection: Use respiratory equipment. Use the same protection as mentioned in item 8. Warranty good ventilation. Risks of slide
6. Accidental release measures :
Individual and environmental protection: Avoid penetration into sewerage, waterways or ground water.
Prevent spreading and product from entering drains, etc. Contain spill with inert material (sand, earth).
Cleaning up: See item 13
7. Handling and storage:
Handling: The best storage conditions are 20掳C 卤5掳C, 50%HR 卤15% HR, in a healthy location (without dust, grease, or water), products being in their
original packaging closed, out of direct sunlight.
Storage: Avoid direct eye and skin contact and use personal protection mentioned in item 8.
8. Exposure control / Personal protection
Respiratory protection: No special protection necessary
Hands protection: The use of rubber gloves is recommended
Eye protection: When risk of splashes exists, use safety spectacles
Skin protection: No special protection necessary
Personal hygiene: Handle with elementary precautions of hygiene and neatness. Do not eat, drink, or smoke on the work area. Wash hands abundantly
before eating, drinking or smoking. Avoid inhalation or ingestion of smoke.
9. Chemical and physical properties :
Appearance: Clear liquid
Colour : ASTM color : 0.5
Odour: Light
pH: 20掳 100 g/l: 9.5
C,
Boiling temperature: Not determinated
Melting temperature : Not determinated
Decomposition temperature : 270掳 C
Flash point: 170掳C DIN ISO 2593Not available
Density: 0,93 g/cm3 (15掳C, DIN 51757)
Viscosity: (20掳 365 mm2/s
C):
Solubility: Not soluble in water (dispersion)
Vapour pressure: Not available
- 1/2 -
MATERIAL SAFETY DATA SHEET
In compliance with European directive 91/155/CEE
Product name: BETRONOL EP 214
10. Stability and reactivity:
Stability: Phases separation after freezing
Conditions to avoid: None
Materials to avoid: Strong oxidisers and acids
Decomposition products: None hazardous known
11. Toxicological information:
Acute toxicity:
Inhalation:
Ingestion:
Skin contact:
Eye contact:
Chronic toxicity:
Irritation/sensitization :
12. Eco-toxicological information:
Degradability :
Not available.
Accumulation :
-
Effects with short and long terms:
-Different harmful effects :
-
13. Disposal:
Dispose according to local regulations. Comply with all federal, state and local regulations.
Recommendations: Transfer to a suitable container. Contaminated containers should be emptied completely. After adequate cleaning, reuse is possible.
Code EWC (European waste code): 12 01 09 (ADEME)
Contaminated containers recommendations: Contaminated containers should be emptied completely. After adequate cleaning, reuse is possible.
14. Transport information:
Not restricted
Labelling:
15. Regulatory :
Labelling according to European directive 67/548/CEE :
Phrase S : -
Phrase R : -
16. Other information:
Emergency phone numbers:
France: ORFILA: (00 33) 01 45 42 59 60 United Kingdom :UNITED KINGDOM: National Chemical Emergency Center Culham Laboratory: (00 44) 01235
463089 ITALY: Laboratori de Tossicologia: (00 39) 0266 10 10 30 SPAIN: Servico de Informacion Toxicologia: (00 34) 91 562 04 21 PORTUGAL: Sevico
Toxicologia: (00 351) 213 30 3272 GERMANY: Beratungsstelle bei Vergiftungen: (00 49) 06131 19241
Other phone numbers: For other countries, contact the national emergency center.
These information are based on Material Safety Data Sheets from the manufacturers. They do not represent a warranty on the properties of the product.
They do not excuse the user of the product from knowing and applying the regulation and from performing the obligations which fall to him during the use
of this product. Product intended for an industrial use only. Not to use for other applications that those mentioned on the Technical Data Sheet. Handle
with elementary precautions of hygiene and neatness.
- 2/2 -
|