MATERIAL SAFETY DATA SHEET
Sikatop 111, 121, 122, 123, & 126 Plus - Part A
HMIS
HEALTH 1
FLAMMABILITY 0
REACTIVITY 0
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
201 Polito Ave 201 Polito Ave
Lyndhurst, NJ 07071 Lyndhurst, NJ 07071
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikausa.com Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 10/01/2007
Product Name: Sikatop 111, 121, 122, 123, & 126 Plus - Part A
CAS Number: Not Established
MSDS Number: 4184
Product Code: Various
Synonyms
SIKATOP 111 PLUS - PART A
SIKATOP 121 PLUS - PART A
SIKATOP 122 PLUS - PART A
SIKATOP 123 PLUS - PART A
SIKATOP 126 PLUS - PART A
2. Composition/Information On Ingredients
This products contains no hazardous ingredients when evaluated by criteria established in the OSHA Hazard
Communication Standard (29 CFR 1910.1200).
3. Hazards Identification
Eye Hazards
May cause eye irritation.
Skin Hazards
May cause skin irritation.
Ingestion Hazards
May be harmful if swallowed.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
Sikatop 111, 121, 122, 123, & 126 Plus - Part A
3. Hazards Identification - Continued
Inhalation Hazards
Moderate respiratory irritant.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If victim is fully conscious, give one or two cups of water or milk to drink. Call a physician if necessary.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration. Call a physician if needed.
5. Fire Fighting Measures
Flash Point: >220 掳F
Fire And Explosion Hazards
Material may splatter above 212F. Polymer film can burn.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate Personal Protective Equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Do not flush to sewer or allow to enter waterways. Ventilate
enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Store in a cool, dry, well ventilated area. Keep containers tightly closed.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. Refer to the current edition of "Industrial Ventilation: A
Manual of Recommended Practice" published by the American Conference of Governmental Industrial Hygienists
for information on the design, installation, use, and maintenance of exhaust systems.
Eye/Face Protection
Faceshield over safety glasses or goggles.
Skin Protection
Wear long sleeve shirt, long pants, chemical resistant gloves.
Page 2 of 4
MATERIAL SAFETY DATA SHEET
Sikatop 111, 121, 122, 123, & 126 Plus - Part A
8. Exposure Controls/Personal Protection - Continued
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use.
9. Physical And Chemical Properties
Appearance
Green Liquid
Odor
Acrylic smell
Chemical Type: Mixture
Physical State: Liquid
Percent VOCs: 0%
Packing Density: 8.5 pounds/gallon
Vapor Density: >AIR
Evaporation Rate: Slower then ether
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
Avoid Freezing
Incompatible Materials
None Known
Hazardous Decomposition Products
None Known
Conditions To Avoid (Polymerization)
None Known
11. Toxicological Information
Conditions Aggravated By Exposure
None Known
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Not Regulated by the USDOT.
Page 3 of 4
MATERIAL SAFETY DATA SHEET
Sikatop 111, 121, 122, 123, & 126 Plus - Part A
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
16. Other Information
HMIS Rating
H eal th: 1
F i re : 0
Reactivity: 0
PP E: C
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
This MSDS Supercedes A Previous MSDS Dated: 04/26/2004
Disclaimer
The information contained in this Material Safety Data Sheet applies only to the actual Sika Corporation ("Sika")
product identified and described herein. This information is not intended to address, nor does it address the use
or application of the identified Sika product in combination with any other material, product or process. All of the
information set forth herein is based on technical data regarding the identified product that Sika believes to be
reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the
warnings and instructions on the product's current Technical Data Sheet, product label and Material Safety Data
Sheet for each Sika product, which are available at web site and/or telephone number listed in Section 1 of this
MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS
INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A
MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY
OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacorp.com or
201-933-8800.
SIKA CORPORATION
Printed Using MSDS Generator鈩? 2000
Page 4 of 4
|