HMIS
HEALTH 3
FLAMMABILITY 0
REACTIVITY 0
D
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
201 Polito Ave 201 Polito Ave
Lyndhurst, NJ 07071 Lyndhurst, NJ 07071
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikausa.com Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 07/07/2005
Product Name: Sikadur 52 - Part B
CAS Number: Not Established
Chemical Family: Amine
MSDS Number: 3069
Product Code: 0396140
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
NONYL PHENOL 84852-15-3
PROPRIETARY BLEND OF ALIPHATIC & CYCLOALIPHATIC AMINES Trade Secret
3. Hazards Identification
Eye Hazards
Causes eye irritation. Corrosive to living tissue.
Skin Hazards
Causes skin irritation. Corrosive to living tissue.
Ingestion Hazards
May be harmful if swallowed.
Inhalation Hazards
May cause nose, throat, and lung irritation. Moderate respiratory irritant.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sikadur 52 - Part B
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration.
5. Fire Fighting Measures
Flash Point: 205 掳F
Autoignition Point: N/AV 掳F
Fire And Explosion Hazards
Exposure to heat builds up pressure in closed containers.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate Personal Protective Equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Do not flush to sewer or allow to enter waterways. Ventilate
enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Keep containers tightly closed.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. Refer to the current edition of "Industrial Ventilation: A
Manual of Recommended Practice" published by the American Conference of Governmental Industrial Hygienists
for information on the design, installation, use, and maintenance of exhaust systems.
Eye/Face Protection
Faceshield over safety glasses or goggles.
Skin Protection
Avoid skin contact. Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure. Launder
before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sikadur 52 - Part B
8. Exposure Controls/Personal Protection - Continued
Respiratory Protection - Continued
conditions warrant a respirator's use.
Other/General Protection
Wash thoroughly after handling.
Ingredient(s) - Exposure Limits
NONYL PHENOL
ACGIH TLV: NOT ESTABLISHED
OSHA PEL: NOT ESTABLISHED
IARC: NO
NTP: NO
9. Physical And Chemical Properties
Appearance
Light yellow to amber liquid.
Odor
Amine Odor
Chemical Type: Mixture
Physical State: Liquid
Melting Point: N/AV 掳F
Boiling Point: N/AV 掳F
Specific Gravity: 0.86
Percent Volatiles: N/AV
Packing Density: 7.16 pounds/gallon
Vapor Pressure: N/AV
Vapor Density: >AIR
pH Factor: 11.5-12
Solubility: N/AV
Evaporation Rate: Slower than ether
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
None Known
Incompatible Materials
Strong oxidizing agents, acid and epoxy resins under uncontrolled conditions.
Hazardous Decomposition Products
CO, CO2, Oxides of Nitrogen
Conditions To Avoid (Polymerization)
None Known
11. Toxicological Information
Miscellaneous Toxicological Information
None Known
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sikadur 52 - Part B
11. Toxicological Information - Continued
Conditions Aggravated By Exposure
None Known
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations.
Waste generators must determine whether a discarded material is classified as a hazardous waste. USEPA guidelines
for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state
and local hazardous waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Corrosive Liquid, Basic, Organic, NOS (Aliphatic & Cycloaliphatic Amines)
Hazard Class
8 PGII
DOT Identification Number
UN3267
DOT Shipping Label
CORROSIVE
Additional Shipping Paper Description
Shall be marked as a marine pollutant when offered for transportation in bulk containers.
Shall be marked as a marine pollutant when offered for transportation in non-bulk containers aboard a vessel.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
16. Other Information
HMIS Rating
H eal th: 3
F i re : 0
Reactivity: 0
PP E: D
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
This MSDS Supercedes A Previous MSDS Dated: 11/05/2003
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sikadur 52 - Part B
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied andassume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
SIKA CORPORATION
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP