MATERIAL SAFETY DATA                                             SHEET



                                            Sikadur Injection Gel FS / Anchor Fix 3 - Part B





HMIS

 HEALTH                        *3

 FLAMMABILITY                   1

 REACTIVITY                     0

                               C

 PERSONAL PROTECTION





1. Product And Company Identification

Supplier                                                   Manufacturer

Sika Corporation                                           Sika Corporation

201 Polito Ave                                             201 Polito Ave

Lyndhurst, NJ 07071                                        Lyndhurst, NJ 07071

Company Contact: EHS Department                            Company Contact: EHS Department

Telephone Number: 201-933-8800                             Telephone Number: 201-933-8800

FAX Number: 201-933-9379                                   FAX Number: 201-933-9379

Web Site: www.sikausa.com                                  Web Site: www.sikausa.com



Supplier Emergency Contacts & Phone Number                 Manufacturer Emergency Contacts & Phone Number

CHEMTREC: 800-424-9300                                     CHEMTREC: 800-424-9300

INTERNATIONAL: 703-527-3887                                INTERNATIONAL: 703-527-3887





Issue Date: 08/14/2007

Product Name: Sikadur Injection Gel FS / Anchor Fix 3 - Part B

CAS Number: Not Established

Chemical Family: Amine Compound

Chemical Formula: RMF-2913

MSDS Number: 4140

Product Code: 078614G



2. Composition/Information On Ingredients



                                     Ingredient                                       CAS             Percent Of

                                       Name                                          Number          Total Weight

BENZYL ALCOHOL                                                                        100-51-6

CALCIUM CARBONATE                                                                     471-34-1

NONYL PHENOL                                                                        84852-15-3

PHENOL                                                                                108-95-2                      5-9

PROPRIETARY BLEND OF ALIPHATIC AMINES                                              Trade Secret

TALC                                                                                14807-96-6

Note: Exposure to Calcium Carbonate and Talc is applicable only if cured with Part "A" and sanded.



3. Hazards Identification

Eye Hazards

  Causes eye irritation. Causes irreversible eye damage.







                                                    Page 1 of 6

                   MATERIAL SAFETY DATA                                                SHEET

                           Sikadur Injection Gel FS / Anchor Fix 3 - Part B



3. Hazards Identification - Continued

Skin Hazards

   Causes skin irritation. Causes irreversible skin damage. Prolonged and/or repeated skin contact may cause an

   allergic reaction/sensitization.

Ingestion Hazards

   Harmful if swallowed.

Inhalation Hazards

   Causes respiratory tract irritation.



4. First Aid Measures

Eye

  In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.

  Get medical attention immediately if irritation develops and persists.

Skin

   In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical

   attention immediately if irritation (redness, rash, blistering) develops and persists.

Ingestion

   If swallowed, do not induce vomiting unless directed to do so by medical personnel.

Inhalation

   Remove to fresh air. If not breathing, give artificial respiration.



5. Fire Fighting Measures

Flash Point: >200 °F

Autoignition Point: N/AV °F

Lower Explosive Limit: N/AV

Upper Explosive Limit: N/AV

Fire And Explosion Hazards

   Exposure to heat builds up pressure in closed containers.

Extinguishing Media

   In case of fire, use water spray (fog) foam, dry chemical, or CO2.

Fire Fighting Instructions

   In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained

   breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.



6. Accidental Release Measures

Avoid release to the environment. Use appropriate Personal Protective Equipment (PPE). Contain spill and collect with

absorbent material and transfer into suitable containers. Do not flush to sewer or allow to enter waterways. Ventilate

enclosed area.



7. Handling And Storage

Handling And Storage Precautions

  Keep containers tightly closed. Keep out of reach of children.

Work/Hygienic Practices

  Wash thoroughly with soap and water after handling.









                                                         Page 2 of 6

                  MATERIAL SAFETY DATA                                                SHEET

                         Sikadur Injection Gel FS / Anchor Fix 3 - Part B



8. Exposure Controls/Personal Protection

Engineering Controls

  Use with adequate general and local exhaust ventilation. Refer to the current edition of "Industrial Ventilation: A

  Manual of Recommended Practice" published by the American Conference of Governmental Industrial Hygienists

  for information on the design, installation, use, and maintenance of exhaust systems.

Eye/Face Protection

  Safety glasses with side shields or goggles.

Skin Protection

   Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long

   pants). Launder before reuse.

Respiratory Protection

  A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace

  conditions warrant a respirator's use. In areas where the Permissible Exposure Limtis are exceeded, use a

  properly fitted NIOSH-approved respirator.

Other/General Protection





Ingredient(s) - Exposure Limits

   CALCIUM CARBONATE

     ACGIH TLV-TWA 10 mg/m3

     OSHA PEL-TWA 15 mg/m3

     OSHA PEL-TWA 5 mg/m3

   NONYL PHENOL

     EXPOSURE LIMITS NOT ESTABLISHED

     NTP - NOT LISTED

     IARC - NOT LISTED

   PHENOL

     ACGIH TLV-TWA 5 ppm (Skin)

     OSHA PEL-TWA 5 ppm (Skin)

   TALC

     ACGIH TLV-TWA 2 mg/m3

     OSHA PEL-TWA 20 mppcf



9. Physical And Chemical Properties

Appearance

  Gray Liquid

Odor

  Amine Odor

Chemical Type: Mixture

Physical State: Liquid

Melting Point: N/AV °F

Boiling Point: N/AV °F

Specific Gravity: 1.54

Percent Volatiles: N/AV

Percent VOCs: 2.17 (A+B)

Packing Density: 13.0 pounds / gallon

Vapor Pressure: N/AV

Vapor Density: >AIR

Solubility: N/AV





                                                      Page 3 of 6

                  MATERIAL SAFETY DATA                                                  SHEET

                         Sikadur Injection Gel FS / Anchor Fix 3 - Part B



9. Physical And Chemical Properties - Continued

Odor - Continued

Evaporation Rate: Slower than ether

VOC Content (A+B): < 35 grams/liter



10. Stability And Reactivity

Stability: Stable

Hazardous Polymerization: Will Not Occur

Conditions To Avoid (Stability)

  Exotherm when curing in mass.

Incompatible Materials

   Strong Acids and Oxidizing Agents.

Hazardous Decomposition Products

  Nitrogen Oxides, CO, CO2

Conditions To Avoid (Polymerization)

  Exotherm when curing in mass.



11. Toxicological Information

Ingredient(s) - Carginogenicity

   TALC

     Listed In The IARC Monographs



12. Ecological Information

No Data Available...



13. Disposal Considerations

Dispose in accordance with applicable federal, state and local government regulations. Waste generators must

determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification

determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous

waste regulations to ensure complete and accurate classification.



14. Transport Information

Proper Shipping Name

   Not regulated by the USDOT.



15. Regulatory Information

U.S. Regulatory Information

   All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act

   (TSCA) Chemical Substance Inventory.



SARA Hazard Classes

  Acute Health Hazard

  Chronic Health Hazard

SARA Title III - Section 313 Supplier Notification

  This product contains the following toxic chemicals that are subject to the reporting requirements of section 313 of

  the Emergency Planning and Community Right-To-Know Act (EPCRA) of 1986 and of 40 CFR 372.

   PHENOL (108-95-2) 5 - 9 %





                                                       Page 4 of 6

                  MATERIAL SAFETY DATA                                                  SHEET

                         Sikadur Injection Gel FS / Anchor Fix 3 - Part B



15. Regulatory Information - Continued

SARA Title III - Section 313 Supplier Notification - Continued

  This information must be included on all MSDSs that are copied and distributed for this material.

Ingredient(s) - U.S. Regulatory Information

   PHENOL

     SARA Title III - EPA Part 355 Extremely Hazardous Substance

     SARA Title III - Section 313 Form "R"/TRI Reportable Chemical

     SARA - Acute Health Hazard

     SARA - Chronic Health Hazard

     SARA - Fire Hazard

Ingredient(s) - State Regulations

   BENZYL ALCOHOL

     New Jersey - Workplace Hazard

     Pennsylvania - Workplace Hazard

     Massachusetts - Hazardous Substance

   CALCIUM CARBONATE

     Pennsylvania - Workplace Hazard

   PHENOL

     New Jersey - Workplace Hazard

     New Jersey - Environmental Hazard

     New Jersey - Special Hazard

     Pennsylvania - Workplace Hazard

     Pennsylvania - Environmental Hazard

     California - CalARP Table 3 Regulated Substance

     Massachusetts - Hazardous Substance

     New York City - Hazardous Substance

   TALC

     New Jersey - Workplace Hazard

     Pennsylvania - Workplace Hazard

     Massachusetts - Hazardous Substance



16. Other Information

HMIS Rating

Health: *3

F i re : 1

Reactivity: 0

PP E: C

Revision/Preparer Information

MSDS Preparer: EHS Department

MSDS Preparer Phone Number: 201-933-8800

This MSDS Supercedes A Previous MSDS Dated: 04/19/2006



Disclaimer

   The information contained in this Material Safety Data Sheet applies only to the actual Sika Corporation ("Sika")

   product identified and described herein. This information is not intended to address, nor does it address the use

   or application of the identified Sika product in combination with any other material, product or process. All of the

   information set forth herein is based on technical data regarding the identified product that Sika believes to be

   reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the

   warnings and instructions on the product's current Technical Data Sheet, product label and Material Safety Data

   Sheet for each Sika product, which are available at web site and/or telephone number listed in Section 1 of this





                                                       Page 5 of 6

                                MATERIAL SAFETY DATA                                       SHEET

                                     Sikadur Injection Gel FS / Anchor Fix 3 - Part B



 Disclaimer - Continued

       MSDS.

       SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS

       INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR

       CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A

       MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY

       OTHERS.

       All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacorp.com or

       201-933-8800.

       SIKA CORPORATION

Printed Using MSDS Generatorâ„? 2000









                                                          Page 6 of 6