MATERIAL SAFETY DATA SHEET
Sikafloor 381 Part B
HMIS
HEALTH 3
FLAMMABILITY 0
REACTIVITY 0
D
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Canada Inc.
201 Polito Ave 601, Avenue Delmar
Lyndhurst, NJ 07071 Pointe Claire, QC H9R 4A9 Canada
Company Contact: EHS Department Company Contact: Steve Gosselin
Telephone Number: 201-933-8800 Telephone Number: 514-697-2610
FAX Number: 201-933-9379
Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CANUTEC: 613-996-6666
INTERNATIONAL: 703-527-3887
Issue Date: 03/06/2006
Product Name: Sikafloor 381 Part B
CAS Number: Not Established
MSDS Number: 3814
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
2,4,6-TRI(DIMETHYLAMINO METHYL)PHENOL 90-72-2
ALIPHATIC AND AROMATIC AMINE BLEND Mixture
BENZYL ALCOHOL 100-51-6
NONYL PHENOL 84852-15-3
3. Hazards Identification
Eye Hazards
Corrosive to living tissue. Causes eye irritation. Causes eye burns.
Skin Hazards
Corrosive to living tissue. May cause skin irritation. Causes skin burns. Prolonged and/or repeated skin contact
may cause an allergic reaction/sensitization.
Ingestion Hazards
Corrosive to living tissue. Harmful if swallowed.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sikafloor 381 Part B
3. Hazards Identification - Continued
Inhalation Hazards
May cause nose, throat, and lung irritation.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration, seek medical attention.
5. Fire Fighting Measures
Flash Point: >200 掳F >96 掳C
Fire And Explosion Hazards
During a fire, irritating and/or toxic gases and aerosols from the decomposition/combustion products may be
present.
Extinguishing Media
Foam, dry chemical, CO2, water
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate Personal Protective Equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Do not flush to sewer or allow to enter waterways. Ventilate
enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Store in a cool, dry, well ventilated area. Keep containers tightly closed.
8. Exposure Controls/Personal Protection
Engineering Controls
Use of a system of local and/or general exhaust is recommended to keep employee below applicable exposure
limits. Refer to the current edition of "Industrial Ventilation: A Manual of Recommended Practice" published by
the American Conference of Governmental Industrial Hygienists for information on the design, installation, use,
and maintenance of exhaust systems.
Eye/Face Protection
Faceshield over safety glasses or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long
pants). Launder before reuse.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sikafloor 381 Part B
8. Exposure Controls/Personal Protection - Continued
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Exposure Limits are exceeded, use a
properly fitted NIOSH-approved respirator.
Ingredient(s) - Exposure Limits
BENZYL ALCOHOL
EXPOSURE LIMITS NOT ESTABLISHED
NONYL PHENOL
EXPOSURE LIMITS NOT ESTABLISHED
9. Physical And Chemical Properties
Appearance
Amber liquid
Odor
Amine odor
Chemical Type: Mixture
Specific Gravity: 0.96
Solubility: Partial in water
10. Stability And Reactivity
Stability: STABLE
Hazardous Polymerization: WILL NOT OCCUR
Conditions To Avoid (Stability)
None known
Incompatible Materials
Acid, strong oxidizer, halogen, aldehyde, nitrate, acrylate
Hazardous Decomposition Products
CO, Nitrogen Oxides, Carbon anhydride, Iderhyde a, ketone
Conditions To Avoid (Polymerization)
None known
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
No Data Available...
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sikafloor 381 Part B
14. Transport Information - Continued
Proper Shipping Name
Corrosive liquid, n.o.s. (Amimnes)
Hazard Class
8 PGIII
DOT Identification Number
UN1760
DOT Shipping Label
Corrosive
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this formula are in compliance with US Toxic Substance Control Act.
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
Ingredient(s) - State Regulations
BENZYL ALCOHOL
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
California - Proposition 65
16. Other Information
HMIS Rating
H eal th: 3
F i re : 0
Reactivity: 0
PP E: D
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
Disclaimer
The information contained in this Material Safety Data Sheet applies only to the actual Sika Corporation ("Sika")
product identified and described herein. This information is not intended to address, nor does it address the use
or application of the identified Sika product in combination with any other material, product or process. All of the
information set forth herein is based on technical data regarding the identified product that Sika believes to be
reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the
warnings and instructions on the product's current Technical Data Sheet, product label and Material Safety Data
Sheet for each Sika product, which are available at web site and/or telephone number listed in Section 1 of this
MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS
INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A
MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY
OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacorp.com or
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sikafloor 381 Part B
Disclaimer - Continued
201-933-8800.
SIKA CORPORATION
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
|