HMIS
HEALTH *3
FLAMMABILITY 1
REACTIVITY 0
D
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
201 Polito Ave 201 Polito Ave
Lyndhurst, NJ 07071 Lyndhurst, NJ 07071
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikausa.com Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 08/14/2007
Product Name: Sikadur Injection Gel / Anchor Fix 4 - Part B
CAS Number: Not Established
Chemical Family: Amine Compound
Chemical Formula: RMF-2945
MSDS Number: 4138
Product Code: 0786140
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
AROMATIC HYDROCARBON BLEND 68477-31-6
BENZYL ALCOHOL 100-51-6
CALCIUM CARBONATE 471-34-1
PROPRIETARY BLEND OF ALIPHATIC AND CYCLOALIPHATIC AMINES Trade Secret
TALC 14807-96-6
Note: Exposure to Calcium Carbonate and Talc is applicable only if cured with Part "A" and sanded.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sikadur Injection Gel / Anchor Fix 4 - Part B
3. Hazards Identification - Continued
Skin Hazards
Causes skin irritation. Causes irreversible skin damage. Prolonged and/or repeated skin contact may cause an
allergic reaction/sensitization.
Ingestion Hazards
May be harmful if swallowed.
Inhalation Hazards
Causes respiratory tract irritation.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration.
5. Fire Fighting Measures
Flash Point: >200 掳F
Autoignition Point: N/AV 掳F
Fire And Explosion Hazards
None known
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate Personal Protective Equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Do not flush to sewer or allow to enter waterways. Ventilate
enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep containers tightly closed. Keep out of reach of children.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. Refer to the current edition of "Industrial Ventilation: A
Manual of Recommended Practice" published by the American Conference of Governmental Industrial Hygienists
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sikadur Injection Gel / Anchor Fix 4 - Part B
8. Exposure Controls/Personal Protection - Continued
Engineering Controls - Continued
for information on the design, installation, use, and maintenance of exhaust systems.
Eye/Face Protection
Safety glasses with side shields or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing. Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Exposure Limits are exceeded, use a
properly fitted NIOSH-approved respirator.
Other/General Protection
Wash thoroughly after handling.
Ingredient(s) - Exposure Limits
CALCIUM CARBONATE
ACGIH TLV-TWA 10 mg/m3
OSHA PEL-TWA 15 mg/m3
OSHA PEL-TWA 5 mg/m3
TALC
ACGIH TLV-TWA 2 mg/m3
OSHA PEL-TWA 20 mppcf
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will Not Occur
Conditions To Avoid (Stability)
Exotherms when curing in mass.
Incompatible Materials
Strong Oxidizers, acids, bases
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sikadur Injection Gel / Anchor Fix 4 - Part B
10. Stability And Reactivity - Continued
Hazardous Decomposition Products
CO, CO2, Oxides of Nitrogen, Ammonia
Conditions To Avoid (Polymerization)
Exotherms when curing in mass.
11. Toxicological Information
Ingredient(s) - Carginogenicity
TALC
Listed In The IARC Monographs
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Not Regulated by the USDOT.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
Ingredient(s) - State Regulations
BENZYL ALCOHOL
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
CALCIUM CARBONATE
Pennsylvania - Workplace Hazard
TALC
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sikadur Injection Gel / Anchor Fix 4 - Part B
16. Other Information
HMIS Rating
Health: *3
F i re : 1
Reactivity: 0
PP E: D
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
This MSDS Supercedes A Previous MSDS Dated: 12/19/2003
Disclaimer
The information contained in this Material Safety Data Sheet applies only to the actual Sika Corporation ("Sika")
product identified and described herein. This information is not intended to address, nor does it address the use
or application of the identified Sika product in combination with any other material, product or process. All of the
information set forth herein is based on technical data regarding the identified product that Sika believes to be
reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the
warnings and instructions on the product's current Technical Data Sheet, product label and Material Safety Data
Sheet for each Sika product, which are available at web site and/or telephone number listed in Section 1 of this
MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS
INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A
MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY
OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacorp.com or
201-933-8800.
SIKA CORPORATION
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP