MATERIAL SAFETY DATA SHEET
Sikadur庐 Patch Fix Part B
HMIS
HEALTH 3
FLAMMABILITY 1
REACTIVITY 0
D
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
201 Polito Ave 201 Polito Ave
Lyndhurst, NJ 07071 Lyndhurst, NJ 07071
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikausa.com Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 10/21/2005
Product Name: Sikadur庐 Patch Fix Part B
CAS Number: Not Established
Chemical Family: Amine
MSDS Number: 3747
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
AROMATIC HYDROCARBON BLEND Not Establis
BENZYL ALCOHOL 100-51-6
PROPRIETARY BLEND OF ALIPHATIC AND CYCLOALIPHATIC AMINES Trade Secret
3. Hazards Identification
Eye Hazards
Corrosive to living tissue. Causes eye irritation. Causes irreversible eye damage.
Skin Hazards
Corrosive to living tissue. Causes skin irritation. Prolonged and/or repeated skin contact may cause an allergic
reaction/sensitization.
Ingestion Hazards
Harmful if swallowed.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
Sikadur庐 Patch Fix Part B
3. Hazards Identification - Continued
Inhalation Hazards
Causes respiratory tract irritation. May cause nose, throat, and lung irritation.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If victim is fully conscious, give one or two cups of water or milk to drink. Call a physician or a poison control
center immediately. Never give anything by mouth to an unconscious victim.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration, seek medical attention. Call a physician or a
poison control center immediately.
5. Fire Fighting Measures
Flash Point: >220 掳F
Fire And Explosion Hazards
Exposure to heat builds up pressure in closed containers.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate personal protective equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Ventilate enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Store in a cool, dry, well ventilated area. Keep containers tightly closed.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. Refer to the current edition of "Industrial Ventilation: A
Manual of Recommended Practice" published by the American Conference of Governmental Industrial Hygienists
for information on the design, installation, use, and maintenance of exhaust systems.
Eye/Face Protection
Safety glasses with side shields or goggles.
Page 2 of 4
MATERIAL SAFETY DATA SHEET
Sikadur庐 Patch Fix Part B
8. Exposure Controls/Personal Protection - Continued
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure. Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use.
Other/General Protection
Wash thoroughly after handling.
9. Physical And Chemical Properties
Appearance
Gray liquid
Odor
Amine odor
Chemical Type: Mixture
Physical State: Liquid
Specific Gravity: 1.70
Packing Density: 14.19
Vapor Density: >AIR
Evaporation Rate: Slower than ether
VOC Content Part B - 39.5%
VOC Content Part A+B - 35 grams/liter (2.48%)
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
None Known
Incompatible Materials
Strong oxidizing materials, acids, and epoxy resins under uncontrolled conditions.
Hazardous Decomposition Products
CO, CO2, Oxides of Nitrogen.
Conditions To Avoid (Polymerization)
None Known
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
Page 3 of 4
MATERIAL SAFETY DATA SHEET
Sikadur庐 Patch Fix Part B
14. Transport Information
Proper Shipping Name
Corrosive liquid, basic, organic, n.o.s. (Aliphatic and Cycloaliphatic Amines)
Hazard Class
8 PGIII
DOT Identification Number
UN3267
DOT Shipping Label
Corrosive
Additional Shipping Paper Description
For individual contractor use Sikadur Patch Fix Part B is regulated as per 49 CFR 173.6 (Materials of Trade)
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
Ingredient(s) - State Regulations
BENZYL ALCOHOL
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
16. Other Information
HMIS Rating
H eal th: 3
F i re : 1
Reactivity: 0
PP E: D
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
This MSDS Supercedes A Previous MSDS Dated: 04/26/2005
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
SIKA CORPORATION
Printed Using MSDS Generator鈩? 2000
Page 4 of 4
|