MATERIAL SAFETY DATA SHEET
Sikafloor 90 - Part B
HMIS
HEALTH 3
FLAMMABILITY 1
REACTIVITY 0
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
201 Polito Ave 201 Polito Ave
Lyndhurst, NJ 07071 Lyndhurst, NJ 07071
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikausa.com Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 04/27/2004
Product Name: Sikafloor 90 - Part B
CAS Number: Not Established
Chemical Family: Amine Compound
MSDS Number: 3164
Product Code: 0631140
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
BENZYL ALCOHOL 100-51-6
BISHPHENOL A 80-05-7
NONYL PHENOL 84852-15-3
PROPRIETARY BLEND OF ALIPHATIC AND CYCLIC AMINES TradeSecret
3. Hazards Identification
Eye Hazards
Corrosive to living tissue. Causes eye irritation and severe burns. May cuase blindness
Skin Hazards
Corrosive to living tissue. Causes skin irritation and severe burns. Prolonged and/or repeated skin contact may
cause an allergic reaction/sensitization.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sikafloor 90 - Part B
3. Hazards Identification - Continued
Ingestion Hazards
Harmful if swallowed. May cause severe burns to the mouth, throat, stomach. May cause vomiting, dizziness,
nausea, diarrhea, damage to the lungs, bleeding of the G.I. system.
Inhalation Hazards
May cause nose, throat, and lung irritation.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel. If victim is fully conscious,
give one or two cups of water or milk to drink.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration, seek medical attention.
5. Fire Fighting Measures
Flash Point: >200 掳F
Autoignition Point: N/AV 掳F
Fire And Explosion Hazards
None Known.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate Personal Protective Equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Do not flush to sewer or allow to enter waterways. Ventilate
enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Store in a cool, dry, well ventilated area. Keep containers tightly closed.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. Refer to the current edition of "Industrial Ventilation: A
Manual of Recommended Practice" published by the American Conference of Governmental Industrial Hygienists
for information on the design, installation, use, and maintenance of exhaust systems.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sikafloor 90 - Part B
8. Exposure Controls/Personal Protection - Continued
Eye/Face Protection
Faceshield over safety glasses or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long
pants). Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use.
Other/General Protection
Wash thoroughly after handling.
9. Physical And Chemical Properties
Appearance
Amber liquid
Odor
Amine odor
Chemical Type: Mixture
Physical State: Liquid
Melting Point: N/AV 掳F
Boiling Point: N/AV 掳F
Specific Gravity: 0.97
Percent Volatiles: 0% by calculation
Packing Density: 8.10 pounds/gallon
Vapor Pressure: N/AV
Vapor Density: >AIR
Solubility: N/AV
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
None known
Incompatible Materials
Strong oxidizers, acids
Hazardous Decomposition Products
Nitrogen Oxides, CO, CO2, aldehydes, and other organics.
11. Toxicological Information
Miscellaneous Toxicological Information
Chronic overexposure may cause liver injury and/or Central Nervous System depression.
Conditions Aggravated By Exposure
Eye disease, skin disorders and allergies, chronic respiratory conditions.
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sikafloor 90 - Part B
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Corrosive liquid, basic, organic, n.o.s. (Aliphatic & Cycloaliphatic Amines)
Hazard Class
8 PGIII
DOT Identification Number
UN3267
DOT Shipping Label
Corrosive
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
SARA Title III - Section 313 Supplier Notification
This product contains the following toxic chemicals that are subject to the reporting requirements of section 313 of
the Emergency Planning and Community Right-To-Know Act (EPCRA) of 1986 and of 40 CFR 372.
BISHPHENOL A (80-05-7) %
This information must be included on all MSDSs that are copied and distributed for this material.
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
Ingredient(s) - U.S. Regulatory Information
BISHPHENOL A
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
Ingredient(s) - State Regulations
BENZYL ALCOHOL
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sikafloor 90 - Part B
16. Other Information
HMIS Rating
H eal th: 3
F i re : 1
Reactivity: 0
PP E: C
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201 933 8800
This MSDS Supercedes A Previous MSDS Dated: 04/27/2004
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
SIKA CORPORATION
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
|