MATERIAL SAFETY DATA SHEET
Page 1 of 5
SIKADUR 31 SBA REGULAR SET 40-60F - PART B
HMIS
HEALTH 3
FLAMMABILITY 1
REACTIVITY 0
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
SIKA CORPORATION SIKA CORPORATION
201 Polito Ave 201 Polito Ave
Lyndhurst, NJ 07071 Lyndhurst, NJ 07071
Company Contact: Kristin Kelley Company Contact: Kristin Kelley
Telephone Number: (201) 933-8800 Telephone Number: (201) 933-8800
FAX Number: (201) 933-9379 FAX Number: (201) 933-9379
Web Site: www.sikausa.com Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 02/20/2003
Product Name: SIKADUR 31 SBA REGULAR SET 40-60F - PART B
CAS Number: Not Established
Chemical Family: AMINE
MSDS Number: 2456
Product Code: 0393-14O
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
BLEND OF ALIPHATIC AMINES TradeSecret
CALCIUM CARBONATE 471-34-1
NONYL PHENOL 84852-15-3
SILICA, QUARTZ 14808-60-7
*EXPOSURE TO SILICA, QUARTZ IS APPLICABLE ONLY IF CURED WITH PART "A" AND SANDED.
3. Hazards Identification
Eye Hazards
MAY CAUSE SEVERE BURNS. MAY CAUSE VISUAL DISTURBANCES, CORNEA DAMAGE, DAMAGE TO
THE OPTIC NERVE OR BLINDNESS. REPEATED AND/OR PROLONGED EXPOSURE MAY RESULT IN
ADVERSE EYE EFFECTS (SUCH AS CONJUNCTIVITIS OR CORNEAL DAMAGE).
Skin Hazards
CORROSIVE, CONTACT MAY CAUSE SEVERE IRRITATION AND PAIN AND MAY CAUSE BURNS,
NECROSIS AND PERMANENT INJURY. PROLONGED AND/OR REPEATED CONTACT WITH SKIN MAY
CAUSE AN ALLERGIC REACTION/SENSITIZATION.
MATERIAL SAFETY DATA SHEET Page 2 of 5
SIKADUR 31 SBA REGULAR SET 40-60F - PART B
3. Hazards Identification - Continued
Ingestion Hazards
MAY CAUSE EFFECTS TO THE GI TRACT, SUCH AS IRRITATION, NAUSEA, GI DISORDERS, ULCERATION,
DIARRHEA OR CONSTIPATION.
Inhalation Hazards
MAY CAUSE RESPIRATORY TRACT IRRITATION.
4. First Aid Measures
Eye
RINSE EYES THOROUGHLY WITH WATER FOR AT LEAST 15 MINUTES. CONSULT PHYSICIAN.
Skin
WASH SKIN THOROUGHLY WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING.
IF SYMPTOMS PERSIST CONSULT PHYSICIAN.
Ingestion
DO NOT INDUCE VOMITING. DILUTE WITH WATER. CONTACT PHYSICIAN.
Inhalation
REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED, INSTITUTE ARTIFICIAL RESPIRATION. CONSULT
WITH PHYSICIAN.
5. Fire Fighting Measures
Flash Point: >200 掳F
Autoignition Point: N/AV 掳F
Fire And Explosion Hazards
NONE KNOWN
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
WEAR SUITABLE PROTECTIVE EQUIPMENT. CONTAIN SPILL AND COLLECT WITH ABSORBENT MATERIAL AND
TRANSFER INTO SUITABLE CONTAINERS. AVOID CONTACT.
7. Handling And Storage
Handling And Storage Precautions
STORE IN A COOL DRY AREA. KEEP CONTAINERS TIGHTLY CLOSED.
Work/Hygienic Practices
WASH THOROUGHLY AFTER USING PRODUCT.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation.
Eye/Face Protection
Safety glasses with side shields or goggles.
MATERIAL SAFETY DATA SHEET Page 3 of 5
SIKADUR 31 SBA REGULAR SET 40-60F - PART B
8. Exposure Controls/Personal Protection - Continued
Skin Protection
AVOID SKIN CONTACT. WEAR LONG SLEEVE SHIRT AND LONG PANTS. NITRILE OR OTHER CHEMICAL
RESISTANT GLOVES.
Respiratory Protection
General room ventilation is normally adequate.
Other/General Protection
WASH THOROUGHLY AFTER HANDLING.
Ingredient(s) - Exposure Limits
CALCIUM CARBONATE
ACGIH TLV-TWA 10 mg/m3
OSHA PEL-TWA 15 mg/m3
OSHA PEL-TWA 5 mg/m3
SILICA, QUARTZ
ACGIH TLV-TWA 0.1 mg/m3 (Notice of Intended Change)
ACGIH TLV-TWA 0.05 mg/m3 (Proposed)
OSHA PEL-TWA 30/%SiO2+2 mg/m3
OSHA PEL-TWA 10/%SiO2+2 mg/m3
OSHA PEL-TWA 250/%SiO+5 mppcf
9. Physical And Chemical Properties
Appearance
DARK GRAY PASTE
Odor
AMINE
Chemical Type: Mixture
Physical State: Solid
Melting Point: N/AV 掳F
Boiling Point: N/AV 掳F
Specific Gravity: 1.80
Percent Volatiles: N/AV
Packing Density: 15.1 #/GAL
Vapor Pressure: N/AV
Vapor Density: >AIR
Solubility: N/AV
Evaporation Rate: SLOWER THAN ETHER
10. Stability And Reactivity
Stability: STABLE
Hazardous Polymerization: WILL NOT OCCUR
Conditions To Avoid (Stability)
NONE KNOWN
Incompatible Materials
STRONG OXIDIZERS, ACIDS, BASES
Hazardous Decomposition Products
CO, CO2, OXIDES OF NITROGEN
MATERIAL SAFETY DATA SHEET Page 4 of 5
SIKADUR 31 SBA REGULAR SET 40-60F - PART B
11. Toxicological Information
Conditions Aggravated By Exposure
EYE DISEASE, SKIN DISORDERS AND ALLERGIES, CHRONIC RESPIRATORY CONDITIONS
Ingredient(s) - Carginogenicity
SILICA, QUARTZ
NTP - Listed On The National Toxicology Program
Listed In The IARC Monographs
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations.
14. Transport Information
Proper Shipping Name
CORROSIVE SOLID, BASIC, ORGANIC, N.O.S. (ALIPHATIC AMINES)
Hazard Class
8 PGII
DOT Identification Number
UN3263
DOT Shipping Label
CORROSIVE
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
State Regulations
WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or
other reproductive harm.
Ingredient(s) - State Regulations
CALCIUM CARBONATE
Pennsylvania - Workplace Hazard
SILICA, QUARTZ
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
California - Proposition 65
Massachusetts - Hazardous Substance
MATERIAL SAFETY DATA SHEET Page 5 of 5
SIKADUR 31 SBA REGULAR SET 40-60F - PART B
16. Other Information
HMIS Rating
Health: 3
F ir e : 1
Reactivity: 0
PP E: C
Revision/Preparer Information
MSDS Preparer: Kristin Kelley
This MSDS Supercedes A Previous MSDS Dated: 09/17/1996
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use in
combination with any other materialor in any process. The information set forth herein is based on technical da ta
that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we make no
warranties, express or implied andassume no liability in connection with any use of this information. Nothing herein
is to be taken as a license to operate under or a recommendation to i nfringe any patents.
SIKA CORPORATION
Printed Using MSDS Generator鈩? 2000
|