Search   
MSDS 
:
 Strontium Chloride Hexahydrate
CAS 
:
 10025-70-4
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 10025-70-4 |Strontium Chloride Hexahydrate | 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
No information available. The toxicological properties of this
substance have not been fully investigated.
Chronic:
Prolonged or repeated exposure may cause adverse reproductive
effects. May cause fetal effects.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Combustion generates toxic fumes.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with skin
and eyes. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 10025-70-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: colorless to white
Odor: none reported
pH: Neutral in solution.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 212 deg F
Freezing/Melting Point: 142 deg F
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble in water.
Specific Gravity/Density: 1.9 (water=1)
Molecular Formula: SrCl2.6H2O
Molecular Weight: 266.6064

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, incompatible materials.
Incompatibilities with Other Materials:
2-Furan percarboxylic acid.
Hazardous Decomposition Products:
Hydrogen chloride.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 10025-70-4: WK8575000
LD50/LC50:
Not available.
Carcinogenicity:
Strontium Chloride Hexahydrate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 10025-70-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 10025-70-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 10025-70-4 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/12/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tin(IV) Chloride Anhydrous 7646-78-8
Tin(IV) Chloride Pentahydrate 7646-78-8
2,5-Dimethyl-3-Pyrroline, 75% Remainder 2,5-Dimethyl-1-Pyrroline 59480-92-1
Ruthenium on 1/8-inch alumina pellets (0.5% ru)
6-Fluorotryptamine hydrochloride, 99% 55206-24-1
3-Phenyl-1-propylamine, 98% 2038-57-5
Tin (IV) Oxide 18282-10-5
Isethionic Acid Potassium Salt, 98% (Titr.) 1561-99-5
Tin (II) Chloride Anhydrous 7772-99-8
Tubocurarine Chloride, 98.0 - 102.0% 6989-98-6
Tin (II) Chloride Dihydrate 10025-69-1
Rhodium on srtio3 , 0.5 wt% rh
Cochineal, extract powder
Dimethyl trans-1,2-cyclopropanedicarboxylate, 99+% 826-35-7
3-Aminocrotonamide, Tech. 85% 15846-25-0
Normal-butyl sulfoxide, tech., 93% 2168-93-6
Tin (II) Oxide 21651-19-4
Stearic acid 57-11-4
Starch, Soluble and Hydrolysed 9005-25-8
2-Chloro-3,5-Dinitropyridine, 99% 2578-45-2
Phosphorous acid, 98% 10294-56-1
Poly(Methyl Methacrylate) (Pract) 9011-14-7
Octadecyltrichlorosilane, 95% 112-04-9
Ethyl Propionate, 97+% (gc) 105-37-3
4,4'-Diaminooctafluorobiphenyl, 98% 1038-66-0
Poly(4-methyl-1-pentene), high molecular weight 25068-26-2
Exo-2-Bromo-5-Oxo-Bicyclo(2.2.1)Heptane-Syn-7-Carboxylic Acid, 99% 63377-25-3
3-Methylsulphonylaniline Hydrochloride , 95+% 80213-28-1
Aminoreductone precursor
Propyl Red, 98% (UV-Vis) 2641-01-2
5-Chloro-2-Mercaptobenzothiazole, 98% 5331-91-9
Strontium Chloride Hexahydrate 10025-70-4
3-Hydroxypyridine, 98% 109-00-2
N-Methyl-1,3-propanediamine, 99% 6291-84-5
Perfluoro-compound FC-72 355-42-0
2,4,4-Trimethyl-1-pentene (pract), 95% (gc) 107-39-1
2,6-Dimethoxypyridine, 99% 6231-18-1
Strontium nitrate 10042-76-9
2-Fluoroanisole, 98% 321-28-8
Cholic acid, 99+% (titr.) 81-25-4
1-Amino-1-cyclopentanecarboxylic acid, 97% 52-52-8
Dipentylamine, 99% 2050-92-2
Trioctylpropylammonium bromide, 99% (titr.) 24298-17-7
Styrene monomer, inhibited 100-42-5
p-Nitrocinnamic acid, 97%,predominantly trans 619-89-6
3,4-Dimethoxyphenethyl Alcohol 7417-21-2
Succinic acid 110-15-6
D(+)-Sucrose 57-50-1
2-Chlorothiophene, 98+% 96-43-5
Terephthalic-D4 Acid, 98 Atom % D 60088-54-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net