Search   
MSDS 
:
 Starch, Soluble and Hydrolysed
CAS 
:
 9005-25-8
SYNONYMS 
:
 Corn starch; Potato starch: iodine indicator.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 9005-25-8 |Starch | 100 | 232-679-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause mild skin irritation. Low hazard for usual industrial
handling.
Ingestion:
Low hazard for usual industrial handling.
Inhalation:
May cause respiratory tract irritation. Low hazard for usual
industrial handling.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Get medical aid if irritation develops or persists. Flush skin with
plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid if irritation or symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or
chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal. Avoid
generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with skin
and eyes. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 9005-25-8:
United Kingdom, WEL - TWA: 10 mg/m3 TWA (total inhalable); 4 mg/m
TWA (respirable)
United Kingdom, WEL - STEL: 30 mg/m3 STEL (total inhalable); 4 mg
STEL (respirable)
United States OSHA: 15 mg/m3 TWA (total dust); 5 mg/m3 TWA
(respirable fraction)
Belgium - TWA: 10 mg/m3 VLE
Malaysia: 10 mg/m3 TWA
Spain: 10 mg/m3 VLA-ED

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: odorless
pH: 5 - 7 (2% solution)
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: soluble in boiling water
Specific Gravity/Density: 1.5
Molecular Formula: C6H10O5x
Molecular Weight: varies

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, dust generation.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 9005-25-8: GM5090000
LD50/LC50:
Not available.
Carcinogenicity:
Starch -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 9005-25-8: 0
Canada
CAS# 9005-25-8 is listed on Canada's DSL List.
CAS# 9005-25-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 9005-25-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/01/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tin(IV) Chloride Anhydrous 7646-78-8
Tin(IV) Chloride Pentahydrate 7646-78-8
2,5-Dimethyl-3-Pyrroline, 75% Remainder 2,5-Dimethyl-1-Pyrroline 59480-92-1
Ruthenium on 1/8-inch alumina pellets (0.5% ru)
6-Fluorotryptamine hydrochloride, 99% 55206-24-1
3-Phenyl-1-propylamine, 98% 2038-57-5
Tin (IV) Oxide 18282-10-5
Isethionic Acid Potassium Salt, 98% (Titr.) 1561-99-5
Tin (II) Chloride Anhydrous 7772-99-8
Tubocurarine Chloride, 98.0 - 102.0% 6989-98-6
Tin (II) Chloride Dihydrate 10025-69-1
Rhodium on srtio3 , 0.5 wt% rh
Cochineal, extract powder
Dimethyl trans-1,2-cyclopropanedicarboxylate, 99+% 826-35-7
3-Aminocrotonamide, Tech. 85% 15846-25-0
Normal-butyl sulfoxide, tech., 93% 2168-93-6
Tin (II) Oxide 21651-19-4
Stearic acid 57-11-4
Starch, Soluble and Hydrolysed 9005-25-8
2-Chloro-3,5-Dinitropyridine, 99% 2578-45-2
Phosphorous acid, 98% 10294-56-1
Poly(Methyl Methacrylate) (Pract) 9011-14-7
Octadecyltrichlorosilane, 95% 112-04-9
Ethyl Propionate, 97+% (gc) 105-37-3
4,4'-Diaminooctafluorobiphenyl, 98% 1038-66-0
Poly(4-methyl-1-pentene), high molecular weight 25068-26-2
Exo-2-Bromo-5-Oxo-Bicyclo(2.2.1)Heptane-Syn-7-Carboxylic Acid, 99% 63377-25-3
3-Methylsulphonylaniline Hydrochloride , 95+% 80213-28-1
Aminoreductone precursor
Propyl Red, 98% (UV-Vis) 2641-01-2
5-Chloro-2-Mercaptobenzothiazole, 98% 5331-91-9
Strontium Chloride Hexahydrate 10025-70-4
3-Hydroxypyridine, 98% 109-00-2
N-Methyl-1,3-propanediamine, 99% 6291-84-5
Perfluoro-compound FC-72 355-42-0
2,4,4-Trimethyl-1-pentene (pract), 95% (gc) 107-39-1
2,6-Dimethoxypyridine, 99% 6231-18-1
Strontium nitrate 10042-76-9
2-Fluoroanisole, 98% 321-28-8
Cholic acid, 99+% (titr.) 81-25-4
1-Amino-1-cyclopentanecarboxylic acid, 97% 52-52-8
Dipentylamine, 99% 2050-92-2
Trioctylpropylammonium bromide, 99% (titr.) 24298-17-7
Styrene monomer, inhibited 100-42-5
p-Nitrocinnamic acid, 97%,predominantly trans 619-89-6
3,4-Dimethoxyphenethyl Alcohol 7417-21-2
Succinic acid 110-15-6
D(+)-Sucrose 57-50-1
2-Chlorothiophene, 98+% 96-43-5
Terephthalic-D4 Acid, 98 Atom % D 60088-54-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net