Search   
MSDS 
:
 3-Phenyl-1-propylamine, 98%
CAS 
:
 2038-57-5
SYNONYMS 
:
 3-Phenylpropylamine; Benzenepropanamine; gamma-Phenylpropylamine;     Hydrocinnamylamine; Propylamine, 3-phenyl-
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2038-57-5 |3-Phenyl-1-propylamine | 98 | 218-012-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns. May cause chemical conjunctivitis and corneal damage.
Skin:
May cause severe irritation and possible burns. May cause cyanosis
of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Aspiration may lead to
pulmonary edema. Inhalation at high concentrations may cause CNS
depression and asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Water may be
ineffective. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Remove all sources of ignition. Absorb spill using
an absorbent, non-combustible material such as earth, sand, or
vermiculite. Do not use combustible materials such as sawdust. Use a
spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame.
Avoid ingestion and inhalation. Wash clothing before reuse. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 2038-57-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 221 deg C @ 760.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 90 deg C ( 194.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: .9510g/cm3
Molecular Formula: C9H13N
Molecular Weight: 135.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Acid anhydrides, acid chlorides, acids, carbon dioxide, strong
oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2038-57-5: UI4590000
LD50/LC50:
Not available.
Carcinogenicity:
3-Phenyl-1-propylamine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 2038-57-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 2038-57-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2038-57-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tin(IV) Chloride Anhydrous 7646-78-8
Tin(IV) Chloride Pentahydrate 7646-78-8
2,5-Dimethyl-3-Pyrroline, 75% Remainder 2,5-Dimethyl-1-Pyrroline 59480-92-1
Ruthenium on 1/8-inch alumina pellets (0.5% ru)
6-Fluorotryptamine hydrochloride, 99% 55206-24-1
3-Phenyl-1-propylamine, 98% 2038-57-5
Tin (IV) Oxide 18282-10-5
Isethionic Acid Potassium Salt, 98% (Titr.) 1561-99-5
Tin (II) Chloride Anhydrous 7772-99-8
Tubocurarine Chloride, 98.0 - 102.0% 6989-98-6
Tin (II) Chloride Dihydrate 10025-69-1
Rhodium on srtio3 , 0.5 wt% rh
Cochineal, extract powder
Dimethyl trans-1,2-cyclopropanedicarboxylate, 99+% 826-35-7
3-Aminocrotonamide, Tech. 85% 15846-25-0
Normal-butyl sulfoxide, tech., 93% 2168-93-6
Tin (II) Oxide 21651-19-4
Stearic acid 57-11-4
Starch, Soluble and Hydrolysed 9005-25-8
2-Chloro-3,5-Dinitropyridine, 99% 2578-45-2
Phosphorous acid, 98% 10294-56-1
Poly(Methyl Methacrylate) (Pract) 9011-14-7
Octadecyltrichlorosilane, 95% 112-04-9
Ethyl Propionate, 97+% (gc) 105-37-3
4,4'-Diaminooctafluorobiphenyl, 98% 1038-66-0
Poly(4-methyl-1-pentene), high molecular weight 25068-26-2
Exo-2-Bromo-5-Oxo-Bicyclo(2.2.1)Heptane-Syn-7-Carboxylic Acid, 99% 63377-25-3
3-Methylsulphonylaniline Hydrochloride , 95+% 80213-28-1
Aminoreductone precursor
Propyl Red, 98% (UV-Vis) 2641-01-2
5-Chloro-2-Mercaptobenzothiazole, 98% 5331-91-9
Strontium Chloride Hexahydrate 10025-70-4
3-Hydroxypyridine, 98% 109-00-2
N-Methyl-1,3-propanediamine, 99% 6291-84-5
Perfluoro-compound FC-72 355-42-0
2,4,4-Trimethyl-1-pentene (pract), 95% (gc) 107-39-1
2,6-Dimethoxypyridine, 99% 6231-18-1
Strontium nitrate 10042-76-9
2-Fluoroanisole, 98% 321-28-8
Cholic acid, 99+% (titr.) 81-25-4
1-Amino-1-cyclopentanecarboxylic acid, 97% 52-52-8
Dipentylamine, 99% 2050-92-2
Trioctylpropylammonium bromide, 99% (titr.) 24298-17-7
Styrene monomer, inhibited 100-42-5
p-Nitrocinnamic acid, 97%,predominantly trans 619-89-6
3,4-Dimethoxyphenethyl Alcohol 7417-21-2
Succinic acid 110-15-6
D(+)-Sucrose 57-50-1
2-Chlorothiophene, 98+% 96-43-5
Terephthalic-D4 Acid, 98 Atom % D 60088-54-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net