www.metglas.com
Material Safety Data Sheet
Metglas庐 2705M Cobalt Base Magnetic Alloy
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: Metglas庐 2705M Cobalt Base Magnetic Core
OTHER/GENERIC NAMES: 2705M Transformer Core
PRODUCT USE: Manufacture of electric transformers
MANUFACTURER: Metglas庐, Inc.
440 Allied Dr.
Conway, SC - 29526
FOR MORE INFORMATION CALL: IN CASE OF EMERGENCY CALL:
(Monday-Friday, 8:00am-5:00pm) (24 Hours/Day, 7 Days/Week)
1-800-581-7654 1-800-581-7654 or Chemtrec 1-800-424-9300
2. COMPOSITION/INFORMATION ON INGREDIENTS
INGREDIENT NAME CAS NUMBER WEIGHT %
Boron 7440-42-8 1鈥?5
Cobalt 7440-48-4 75 鈥? 85
Iron 7439-89-6 1鈥?5
Molybdenum 7439-98-7 1鈥?5
Nickel 7440-02-0 1鈥?5
Silicon 7440-21-3 3-7
Trace impurities and additional material names not listed above may also appear in Section 15 toward the end of the
MSDS. These materials may be listed for local "Right-To-Know" compliance and for other reasons.
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW: A silver to gray metallic foil. As shipped, the primary hazard
is the sharp edges of the product. Some individuals may develop allergic skin reactions
after repeated handling. If melted in a fire, toxic fumes may be released.
POTENTIAL HEALTH HAZARDS
SKIN: Handling of sharp edges may cause cuts. Repeated contact may cause allergic skin reaction
resulting in irritation or dermatitis.
EYES: Not a normal route of entry. Solid particles generated by grinding and sanding may cause
irritation.
MSDS Number: 2705M Page 1 of 7
Current Issue Date: 10/22/2007
www.metglas.com
Material Safety Data Sheet
Metglas庐 2705M Cobalt Base Magnetic Alloy
INHALATION: Vapors and fumes resulting from the grinding, sanding, cutting and/or welding of this
material are harmful if inhaled. Symptoms may include irritation of throat and respiratory
tract. Exposures may result in 鈥渕etal fume fever鈥? which can produce flu-like symptoms.
Repeated exposure may result in allergic reactions that may include asthma in some
individuals.
INGESTION: Not a route of entry.
DELAYED EFFECTS: Repeated inhalation of vapors and fumes may result in toxic effects to the lungs.
Cobalt and cobalt compounds and nickel and nickel compounds have caused cancer
in laboratory animals and should be treated as a 鈥榩ossible鈥? carcinogen. At present
there is no reliable evidence that cobalt or nickel metal has caused cancer in humans.
Long term nickel exposure may affect kidney function.
INGREDIENT NAME NTP STATUS IARC STATUS OSHA LIST
Cobalt None 2b - possible None
carcinogen
Nickel Suspect 2b - possible None
carcinogen carcinogen
Health Rating (HMIS): Health: 1 Fire: 0 Reactivity: 0 Special: None
4. FIRST AID MEASURES
SKIN: Wash hands with soap and water.
EYES: For irritation caused by particles of dust flush eyes with running water. Seek medical assistance if irritation
persists.
INHALATION: Remove to fresh air immediately. If breathing is difficult, get immediate medical assistance.
Oxygen may be given by a person trained and qualified to administer it.
INGESTION: Not a route of entry.
ADVICE TO PHYSICIAN: Treat symptomatically.
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES
FLASH POINT: None
FLASH POINT METHOD: Not applicable
AUTOIGNITION TEMPERATURE: Not applicable
UPPER FLAME LIMIT (volume % in air): Not applicable
LOWER FLAME LIMIT (volume % in air): Not applicable
FLAME PROPAGATION RATE (solids): Not determined.
OSHA FLAMMABILITY CLASS: None
MSDS Number: 2705M Page 2 of 7
Current Issue Date: 10/22/2007
www.metglas.com
Material Safety Data Sheet
Metglas庐 2705M Cobalt Base Magnetic Alloy
EXTINGUISHING MEDIA:
Use any standard agent for surrounding fire but flooding amounts of water is recommended if the metallic ribbon starts
to burn.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
Product may burn if involved in a structural fire.
SPECIAL FIRE FIGHTING PRECAUTIONS/INSTRUCTIONS:
Toxic and irritating vapors may be released if the product melts or burns in a fire. Use self-contained respiratory
protection.
6. ACCIDENTAL RELEASE MEASURES
IN CASE OF SPILL OR OTHER RELEASE:
Material is shipped as an article. Pick up and place into proper storage. Use caution in handling as edges are very
sharp.
Spills and releases may have to be reported to Federal and/or local authorities. See Section 15 regarding reporting
requirements.
7. HANDLING AND STORAGE
NORMAL HANDLING: (Always wear recommended personal protective equipment.)
Handle with care. Edges of material are very sharp.
STORAGE RECOMMENDATIONS:
Store in a facility that will protect product from physical damage and/or contamination with foreign material. (Do not
exposure to moisture or any other substance.)
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS:
Use mechanical ventilation when cutting, grinding, sanding and/or welding product.
PERSONAL PROTECTIVE EQUIPMENT
SKIN PROTECTION:
Wear cut-resistant gloves.
EYE PROTECTION:
Wear safety glasses when grinding, sanding, cutting and/or welding product.
RESPIRATORY PROTECTION:
If necessary to meet exposure limits listed in section 8, wear an air-purifying respirator during grinding, sanding,
cutting and/or welding activities.
MSDS Number: 2705M Page 3 of 7
Current Issue Date: 10/22/2007
www.metglas.com
Material Safety Data Sheet
Metglas庐 2705M Cobalt Base Magnetic Alloy
ADDITIONAL RECOMMENDATIONS:
A safety shower, eyewash or another source of running water should be available in areas where
grinding, sanding, cutting and/or welding operations take place.
EXPOSURE GUIDELINES
INGREDIENT NAME ACGIH TLV OSHA PEL OTHER LIMIT
Cobalt 0.02 mg/m3 (TWA) 0.1 mg/m3 (TWA) ***End of shift:
15 ug/l 鈥? urine
1 ug/l - blood
Iron 5 mg/m3 (TWA) as 10 mg/m3 (TWA) as None
iron oxide iron oxide fume
Molybdenum 10 mg/m3 (TWA) 10 mg/m3 (TWA) None
total dust
Nickel 1.5 mg/m3 (TWA) 1 mg/m3 (TWA) None
inhalable fraction
Silicon 10 mg/m3 (TWA) 15 mg/m3 (TWA) as None
total dust.
5 mg/m3 (TWA) as
respirable dust.
*** = Biological Exposure Index (ACGIH).
OTHER EXPOSURE LIMITS FOR POTENTIAL DECOMPOSITION PRODUCTS:
None
9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE: A shiny silver to gray metallic ribbon.
PHYSICAL STATE: Solid
MOLECULAR WEIGHT: Metal alloy mixture
CHEMICAL FORMULA: Metal alloy mixture
ODOR: None
SPECIFIC GRAVITY (water = 1.0): 7.80
SOLUBILITY IN WATER (weight %): None
pH: Not applicable
CURIE TEMPERATURE: 689 掳F (365 掳C)
CRYSTALLIZATION TEMP: 968 掳F (520 掳C)
VAPOR PRESSURE: Not applicable
VAPOR DENSITY (air = 1.0): Not applicable
EVAPORATION RATE: COMPARED TO:
Not applicable
% VOLATILES: None
FLASH POINT: None
(Flash point method and additional flammability data are found in Section 5.)
MSDS Number: 2705M Page 4 of 7
Current Issue Date: 10/22/2007
www.metglas.com
Material Safety Data Sheet
Metglas庐 2705M Cobalt Base Magnetic Alloy
10. STABILITY AND REACTIVITY
NORMALLY STABLE? (CONDITIONS TO AVOID):
Normally stable.
INCOMPATIBILITIES:
Product can be attacked by moisture and corrosive materials.
HAZARDOUS DECOMPOSITION PRODUCTS:
Toxic vapors and metallic fumes may be released if melted or ignited in a fire (see section 3).
HAZARDOUS POLYMERIZATION:
Not applicable.
11. TOXICOLOGICAL INFORMATION
IMMEDIATE (ACUTE) EFFECTS:
Cobalt: LD50 (oral, rat) 6.17 g/kg Cobalt may cause both dermal and respiratory sensitization.
Iron: LD50 (oral, rat) 30 g/kg
Nickel: LD50 (dermal, rabbit) >2 g/kg Nickel may cause dermal sensitization.
Silicon: LD50 (oral, rat) 3.16 g/kg
DELAYED (SUBCHRONIC AND CHRONIC) EFFECTS:
Cobalt: IARC lists cobalt as a class 2b possible carcinogen based on animal test data.
Nickel: IARC lists cobalt as a class 2b possible carcinogen based on animal test data. Listed as a 鈥榮uspect carcinogen by
NTP. Chronic inhalation may cause pneumoconiosis and kidney effects.
Silicon: Repeated inhalation of silicon may cause lung effects.
OTHER DATA:
None
12. ECOLOGICAL INFORMATION
Not anticipated to present an ecological hazard.
13. DISPOSAL CONSIDERATIONS
RCRA
Is the unused product a RCRA hazardous waste if discarded? No
If yes, the RCRA ID number is:
OTHER DISPOSAL CONSIDERATIONS: Observe all Federal, State, and Local Environmental regulations. Some
local regulations may restrict disposal of metallic waste based on composition. Recycling of metallic products is
recommended where recycling programs are available.
MSDS Number: 2705M Page 5 of 7
Current Issue Date: 10/22/2007
www.metglas.com
Material Safety Data Sheet
Metglas庐 2705M Cobalt Base Magnetic Alloy
The information offered here is for the product as shipped. Use and/or alterations to the product such as mixing with
other materials may significantly change the characteristics of the material and alter the RCRA classification and the
proper disposal method.
14. TRANSPORT INFORMATION
US DOT PROPER SHIPPING NAME: Not regulated
US DOT HAZARD CLASS: Not regulated
US DOT ID NUMBER: Not regulated
For additional information on shipping regulations affecting this material, contact the information number found in
Section 1.
15. REGULATORY INFORMATION
TOXIC SUBSTANCES CONTROL ACT (TSCA)
TSCA INVENTORY STATUS: An article manufactured from ingredients listed on the TSCA Inventory.
OTHER TSCA ISSUES: None
SARA TITLE III/CERCLA
"Reportable Quantities" (RQs) and/or "Threshold Planning Quantities" (TPQs) exist for the following ingredients.
INGREDIENT NAME SARA/CERCLA RQ (lb) SARA EHS TPQ (lb)
Nickel 100 None
Spills or releases resulting in the loss of any ingredient at or above its RQ requires immediate notification to the
National Response Center [(800) 424-8802] and to your Local Emergency Planning Committee.
SECTION 311 HAZARD CLASS: Immediate
SARA 313 TOXIC CHEMICALS:
The following ingredients are SARA 313 "Toxic Chemicals". CAS numbers and weight percents are
found in Section 2.
INGREDIENT NAME COMMENT
Cobalt None
Nickel None
STATE RIGHT-TO-KNOW
In addition to the ingredients found in Section 2, the following are listed for state right-to-know
purposes.
INGREDIENT NAME WEIGHT % COMMENT
Cobalt 75 鈥? 85 Listed as California Proposition 65 carcinogen.
MSDS Number: 2705M Page 6 of 7
Current Issue Date: 10/22/2007
www.metglas.com
Material Safety Data Sheet
Metglas庐 2705M Cobalt Base Magnetic Alloy
Nickel 1鈥?5 Listed as California Proposition 65 carcinogen.
ADDITIONAL REGULATORY INFORMATION:
This product can be exported under the Export Control Classification Number: EAR99. This product cannot be
exported to the following countries: Cuba, Libya, Iraq, Iran and Sudan.
WHMIS CLASSIFICATION (CANADA):
D2B (sensitizer) Basis: Product as shipped.
This product has been classified in accordance with hazard criteria of the Controlled Products Regulations and the
MSDS contains all the information required by the Controlled Products Regulations.
FOREIGN INVENTORY STATUS:
Article: Ingredients are listed on Canadian DSL and European EINECS.
16. OTHER INFORMATION
CURRENT ISSUE DATE: October 12, 2007
PREVIOUS ISSUE DATE: October, 2003
CHANGES TO MSDS FROM PREVIOUS ISSUE DATE ARE DUE TO THE FOLLOWING:
Content review and added HMIS rating Section 3.
OTHER INFORMATION: Contact Metglas庐, Inc. if you have specific questions regarding the handling of or
applications for this product.
MSDS Number: 2705M Page 7 of 7
Current Issue Date: 10/22/2007
|