MATERIAL SAFETY DATA SHEET
PRODUCT NAME: Easy Gloss Clearcoat Activator HMIS CODES: H F R P
PRODUCT CODE: CA-201 2* 3 1 K
========================= SECTION I - MANUFACTURER IDENTIFICATION ========================
MANUFACTURER鈥橲 NAME: Autobody Brands International
ADDRESS: 9188 San Salvador, Suite 105, Scottsdale, AZ 85258
EMERGENCY PHONE: Chemtrec 800-424-9300 INFORMATION PHONE: (480)451-4451
DATE REVISED: 04-14-99 NAME OF PREPARER: Tim Herrington
========================= SECTION II - HAZARDOUS INGREDIENTS / SARA III INFORMATION =========================
OCCUPATIONAL EXPOSURE LIMITS VAPOR PRESSURE WEIGHT
HAZARDOUS COMPONENTS CAS NUMBER OSHA PEL ACGIH TLV OTHER mmHg @ TEMP PERCENT
Hexamethylene Diisocyanate 28181-81-2
Methyl N-Propyl Ketone 107-87-9 27.8 68F
Methyl N-amyl Ketone 110-43-0 27.14 68F
Polyisocyanate Adduct 53880-05-0
N-Butyl Acetate 123-86-4 8/4 68F
Aromatic Hydrocarbon A 64742-95-6 10 77F
* Notes toxic chemical (s) subject to the reporting requirements of section 313 Title III and of 40 CFR 372 are present.
NA 鈥? Not Available or Not Applicable
========================= SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS =========================
BOILING RANGE: 213 TO 306 Deg F SPECIFIC GRAVITY (H20=1): 1.01
VAPOR DENSITY: Heavy Than Air EVAPORATION RATE: Slower Than Ether
COATING V.O.C.: 3.29 lb/gl
MATERIAL V.O.C.: 3.29 lb/gl
SOLUBILITY IN WATER: Negligible
APPEARANCE AND ODOR: Opaque and/or translucent viscous liquid with organic solvent odor.
========================= SECTION IV - FIRE AND EXPLOSION HAZARD DATA =========================
FLASH POINT: 46 Deg F METHOD USED: T.C.C.
FLAMMABLE LIMITS IN AIR BY VOLUME - LOWER: 0.9% UPPER: 8.7%
EXTINGUISHED MEDIA: Foam, Alcohol Foam, CO2, Dry Chemical, Water Fog
SPECIAL FIREFIGHTING PROCEDURES
Full emergency equipment with self-contained breathing apparatus and full protective clothing should be worn by firefighters. During a fire, iso-
cyanate vapors and other irritating or highly toxic gases may be generated.
UNUSUAL FIRE AND EXPLOSION HAZARDS
Pressure may build up in closed containers that are exposed to heat. Solvent vapors are heavier than air and may travel a considerable dis-
tance along the ground to an ignition source and flash back.
========================= SECTION V - REACTIVITY DATA =========================
STABILITY: Stable
CONDITIONS TO AVOID: None known
INCOMPATIBILITY (MATERIALS TO AVOID) 鈥? Water, amines, strong bases, alcohols, metal compounds.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS 鈥? BY HEAT AND FIRE: Carbon dioxide, carbon monoxide, oxides of nitrogen, and traces
of HCN and isocyanates monomer.
Easy Gloss Activator 鈥? CA-201 MATERIAL SAFETY DATA SHEET 2 of 3
========================= SECTION V - REACTIVITY DATA =========================
HAZARDOUS POLYMERIZATION: A polymerization may occur above 400F or if exposed to moisture or other materials that react with iso-
cyanates.
========================= SECTION VI - HEALTH HAZARD DATA =========================
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Exposures above suggested limits can irritate mucous membranes in the
respiratory tract causing runny nose, coughing, or shortness of breath. Certain individuals will react with asthma-like symptoms at very low expo-
sures.
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Prolonged or repeated unprotected skin contact may cause
defatting, drying of the skin, or dermititis.
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Prolonged or repeated unprotected skin contact may cause defat-
ting, drying of the skin or dermatitis.
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Gastrointestinal distress and symptoms of systemic poisoning.
HEALTH HAZARDS (ACUTE AND CHRONIC): ACUTE: Shortness of breath, burning sensation of respiratory passages, nausea, headache
and increased proneness to accident. An allergic reaction similar to an asthma attack can occur in some individuals with prolonged or repeated
previous exposure or single large exposure to isocyanates. CHRONIC: Narcosis, kidney and liver dysfunction with possible central nervous sys-
tem effects.
CARCINOGENICITY: NTP? No IARC MONOGRAPHS? No OSHA REGULATED? No
CALIFORNIA PROPOSITION 65 STATEMENT: Check Section II 鈥? Hazardous Ingredients above for the characters [65] in the name of a haz-
ardous component. If these characters are present, then this component is known to the state of California to be a carcinogen, teratogen or
reproductive toxin. However, it is not possible to be certain that a particular chemical on the Proposition 65 list is not present in some very small
but detectable amount.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: Respiratory difficulty or pre-existing skin sensitization.
EMERGENCY AND FIRST AID PROCEDURES: FOR EYES: Flush with plenty of clean flowing water for at least 15 minutes and get medical
attention. FOR SKIN: Wash affected areas with plenty of warm soapy water. Launder contaminated clothing and shoes before reuse. IF
AFFECTED BY INHALATION OF VAPORS: Remove to fresh air. Give oxygen if breathing is difficult. Administer artificial respiration if breathing
has stopped. IF SWALLOWED: Call a physician immediately. Do NOT induce vomiting. Never give anything by mouth to an unconscious per-
son.
========================= SECTION VII - PRECAUTIONS FOR SAFE HANDLING =========================
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Provide adequate ventilation. Remove all possible ignition sources.
Absorb with inert absorbant and dispose in accordance with local regulations for ignitable hazardous waste.
WASTE DISPOSAL METHOD: Dispose in accordance with local regulations for ignitable hazardous waste.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Store in a cool dry place. Outside or detached storage is preferable. Inside
storage should be in a standard flammable liquid storage room or cabinet. Ground containers when transferring from one metal container to
another. Do not reuse empty product container for any purpose.
OTHER CAUTIONS: If a second component is added to this product, or if any additives or thinners are introduces into this product, read all
product labels and all Material Safety Data Sheets prior to use.
========================= SECTION VIII - CONTROL MEASURES =========================
RESPIRATORY PROTECTION: Exhaust ventilation sufficient to keep airborne concentration of solvent, HDI and polyisocyanate below TLV鈥檚
must be utilized. A respirator that is recommended for use in isocyanate-containing environments may also be necessary. When concentrations
are not known, or work area is confined, the use if a positive air pressure respirator is mandatory.
VENTILATION: Local ventilation should be sufficient to reduce airborne vapor concentrations to below LEL and TLV to be considered adequate.
PROTECTIVE GLOVES: Recommended where skin contact is likely. Use solvent resistant gloves such as nitrile rubber.
Easy Gloss Activator 鈥? CA-201 MATERIAL SAFETY DATA SHEET Page 3 of 3
========================= SECTION VIII - CONTROL MEASURES =========================
EYE PROTECTION: Chemical splash goggles are recommended if potential for splashing into the eyes is high.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Solvent resistant clothing is recommended as needed to avoid skin contact.
WORK/HYGIENIC PRACTICES: Wash hands thoroughly after handling product and before smoking or eating.
========================= SECTION IX - DISCLAIMER =========================
DISCLAIMER: The recommended provided herein are based on information believed to be accurate. None of the information stated is to be
construed as any warranty. This product is intended for industry use only and should be used by professionals who have carefully evaluated this
product.
|