Section I Product Identification
Product Name: Finale
Product Type: Germicidal Detergent
WHMIS Classification: Exempt
Section II Hazardous Ingredients
Cas Registry No. % Chemical Name(s) Toxicity
68424-85-1 0.1-1.0 Alkyl Dimethyl Benzyl Ammonium Chloride LD50ORAL (RAT) 400 mg/kg
7173-51-5 0.1-1.0 Didecyl Dimethyl Ammonium Chloride Not Available
Section III Physical Data Section IV Fire and Explosion Hazard Data
Flash Point (Method used) (oC): None
Appearance: Clear Green Liquid
Odour: Scented Extinguishing Media: Not Applicable
PH(concentrate): 7.2 Special Fire Fighting Procedures: None
Boiling Point (oC): 100 Unusual Fire and Explosion Hazards: None
Specific Gravity: 1.0
Solubility in water (%): 100
Section V Toxicological Properties
Effects of Overexposure Hazard Rating Rating System
Health: 1 0 = Insignificant
Swallowing: Slightly Toxic
Flammability: 0 1 = Slight
Inhalation: Slight Irritant
Reactivity: 0 2 = Moderate
Skin Absorption: Unknown
3 = High
Skin Contact: Slight to Moderate Irritant
4 = Extreme
Eye Contact: Slight to Moderate Irritant
Special Warning: None
Section VI First Aid Measures
Ingestion: Promptly drink large quantities of milk, egg whites, gelatin or water. Avoid alcohol. Call a physician
immediately.
Inhalation: Remove to fresh air. Call a physician.
Skin: Flush thoroughly with water for at least 15 minutes. Remove and wash contaminated clothing. Call a physician.
Eyes: Flush thoroughly with water for at least 15 minutes. Call a physician.
Section VII Reactivity Data
Stable: x Unstable:
Condition to avoid: None
Incompatibility (Materials to avoid): None
Hazardous Decomposition Products: None
Hazardous Polymerization: Will not occur
Section VIII Preventive Measures
Protective Gloves: Yes
Eye Protection: Yes
Ventilation: Local Exhaust: General: X
Respiratory Protection (Specify type): No
Other Protective Equipment: In case of spills, wear chemical resistant apron and boots.
Steps to be taken in case material is released or spilled: Mop up spillage. Rinse spill area with water and allow to dry.
Waste disposal method: Flush with water into waste systems in accordance with municipal, provincial and federal regulations.
Precautions to be taken in handling and storage: Normal handling processes. Inside storage at 4-40oC recommended.
Other precautions: Follow label use instructions
UN: Not Applicable
TDG Class: None
Section IX Preparation Data
Prepared by: D.R. Dunlop Phone: (613) 745-6861 MSDS.S06
Date: January 1, 2004 Dustbane Products Limited, 25 Pickering Place, Ottawa, Ontario, K1G 5P4
FINALE
Germicidal Detergent - Dustbane's 5th Generation
鈥淥ne step cleaner, germicide and deodorant (Pseudomonacidal, Staphylocidal,
Salmonellacidal, Fungicidal, Virucidal).鈥?
Features and Benefits
Neutral quat - preserves the floor finish appearance
Excellent cleaning abilities - handles heavy duty cleaning on hard non-porous surfaces
Multiple claims - effectively destroys a broad range of bacteria, fungi and viruses including: Pseudomonas
aeruginosa, Staphylococcus aureaus, Salmonella choleraesuis, Trichophyton mentagrophyte, Influenza
A/Hong Kong, Vaccinia
Pine fragrance - leaves the area smelling fresh and clean
Where to Use
FINALE is intended for use in veterinary clinics, laboratories, hospitals, dental clinics, nursing homes,
food processing facilities and federally inspected meat, poultry and fish establishments.
Surfaces subject to direct food contact should be adequately rinsed with potable water.
How to Use
Recommended Dillution Rates:
General Cleaning 1:15 - 1:30
Heavy Duty Cleaning 1:8 - 1:15
Disinfection 1:15
Note: Adjust dilution rates to suit your cleaning needs.
Apply with a mop, sponge or cloth.
Mold and Mildew: When mixed at a rate of 1:15, FINALE effectively inhibits the growth of odour-causing mold and
mildew. Apply the solution and allow it to dry on the treated surface. Repeat treatment when mold or mildew returns.
Disinfecting: Allow a minimum contact time of 10 minutes in a single application. Surfaces subject to direct food
contact should be adequately rinsed with potable water. Heavily soiled surfaces may require a precleaning step.
HIV-1 When mixed at a rate of 1:15, FINALE may be used to clean and decontaminate hard surfaces exposed to blood
or other body fluids that contain the HIV-1 virus. Thoroughly clean all hard surfaces removing blood and body fluids
prior to disinfection. Allow surfaces to remain wet for a minimum of 4 minutes. Wear protective clothing including
latex gloves, gown, mask and eye goggles. Blood, body fluids, cleaning materials and clothing should be autoclaved
and disposed of according to local regulations. [Note: efficacy testing was done in the presence of hard water (400 ppm
as CaCo3) and a soil load (5% blood serum)].
Specifications
Didecyl dimethyl ammonium chloride 0.54%
n-Alkyl (50% C14, 40% C12, 10% C16); dimethyl benzyl ammonium chloride 0.36%
Inert Ingredients 99.10%
pH, concentrate @ 25掳C 7.2 - 7.7 (neutral)
pH, at 1:80 @ 25掳C 7.0 - 7.5
Colour green
Odour pine
DIN# 02213117
Agri-Food Approval yes
MSDS.S06
|