MATERIAL SAFETY DATA SHEET (MSDS)
EM Science
MATERIAL SAFETY DATA SHEET
------------------------------------------------------------------------------
Section I Product Identification and Use
------------------------------------------------------------------------------
Manufacturer: For More Information Call
EM SCIENCE 856-423-6300 Technical Service
A Division of EM Industries Monday - Friday; 8:00 AM to 5:00 PM
P.O. Box 70 In Case of Emergency Call
480 Democrat Road 800-424-9300 CHEMTREC (USA)
Gibbstown, N.J. 08027 416-201-6383 CANUTEC (Canada)
24 Hours/Day: 7 Days/Week
Product Name: Graphite powder
Product Code(s): B26109,
Chemical Name/Other Name: Graphite, plumbago, black lead, mineral carbon
Chemical Formula: C
Chemical Family: Element
TDG Shipping Name/UN: Not regulated
TDG Classification/Packing group: Not regulated
Use: Laboratory reagent, industrial processes
------------------------------------------------------------------------------
Section II Hazardous Ingredients
------------------------------------------------------------------------------
Chemical name CAS No. %
Graphite powder 7782-42-5 100
------------------------------------------------------------------------------
Section III Physical Data
------------------------------------------------------------------------------
Physical State: Solid
Appearance and Odour: Soft black powder, odourless
Odour Threshold: Not applicable
Specific Gravity: 1.65
Vapour Pressure: Not applicable
Vapour Density: Not applicable
Evaporation Rate: Not applicable
Boiling Point: Not applicable
Freezing Point: 3650oC (sublimes)
pH: Not applicable
Coefficient of water/oil distribution: Not applicable
------------------------------------------------------------------------------
Section IV Fire or Explosion Hazard
------------------------------------------------------------------------------
Conditions of Flammability: Noncombustible
Extinguishing Media: Water, CO2, foam, dry chemical. Firefighters should wear
self-contained breathing apparatus.
Flash point / method: Not applicable
UEL: Not applicable
LEL: Not applicable
Autoignition Temperature: Not applicable
Hazardous Combustion Products: COx
Explosion data - sensitivity to mechanical impact: No
- sensitivity to static discharge: No
------------------------------------------------------------------------------
Section V Reactivity Data
------------------------------------------------------------------------------
Conditions of instability: Normally stable
Incompatibilities: Oxidizers
Conditions of reactivity: Normally stable
Hazardous decomposition products: COx
------------------------------------------------------------------------------
Section VI Toxicological Properties / Health Hazard Data
------------------------------------------------------------------------------
Route of entry:
-skin contact: No information available
-skin absorption: No information available
-eye contact: May irritate
-inhalation: May irritate
-ingestion: Harmful
LC50: Not available
LD50: 440 mg/kg (ivn-mus)
Exposure Limits: 10 mg/m3
Effects of Acute Exposure: No information available
Effects of Chronic Exposure: Prolonged or repeated breathing of dust can result
in pneumonconiosis.
Irritancy: No experimental information available
Sensitization to Product: No information available
Carcinogenicity: No information available
Reproductive Toxicity: No information available
Teratogenicity: No information available
Mutagenicity: No information available
Toxicologically Synergistic Products: None found
------------------------------------------------------------------------------
Section VII First aid measures
------------------------------------------------------------------------------
Skin: Flush the contact area with lukewarm running water for at least 15
minutes. Remove contaminated clothing, taking care not to spread the chemical.
If contamination is extensive, remove clothing under running water. Discard or
decontaminate clothing under running water. Discard or decontaminate clothing
before use. Unless contact has been slight, seek medical attention. Seek
medical attention if irritation persists.
Eye: Flush the contaminated eye(s) for at least 15 minutes with lukewarm
running water, holding the eyelids open. Take care not to rinse contaminated
water into the non-affected eye. Always seek medical attention for accidents
involving the eyes.
Inhalation: Take proper precautions to ensure your own safety before attempting
rescue. Remove source of contamination or move victim to fresh air. If
breathing has stopped, trained personnel should begin artificial respiration,
or if the heart has stopped, cardiopulmonary resuscitation (CPR) immediately.
Seek medical attention.
Ingestion: Never give anything by mouth if victim is rapidly losing
consciousness, or is unconscious or convulsing. Rinse mouth thoroughly with
water. Do not induce vomiting. Have victim drink 200-400 ml of water to dilute.
If breathing has stopped, trained personnel should begin artificial
respiration, or if the heart has stopped, cardiopulmonary resuscitation (CPR)
immediately. Seek medical attention.
------------------------------------------------------------------------------
Section VIII Preventive Measures
------------------------------------------------------------------------------
Engineering Controls: The hazard potential of this material is relatively low.
General ventilation is usually sufficient.
Personal protective equipment:
-gloves: None normally required
-respiratory protection: Dust mask if handling large quantities
-eye protection: Chemical safety goggles
-clothing: Plastic apron, sleeves and boots as appropriate
Storage Requirements: Store in suitable labelled containers. Keep containers
tightly closed when not in use and when empty. Protect from damage. Store in a
cool, dry, well-ventilated area, out of direct sunlight. Store away from
incompatible materials.
Handling Procedures and Equipment: Follow routine safe handling procedures.
Leak or Spill Clean-up: Before dealing with spillages take necessary protective
measures, inform others to keep at a safe distance and, for flammable
materials, shut off all possible sources of ignition. Transfer carefully into
container and arrange removal by disposal company. Wash site of spillage
thoroughly with water and detergent.
Disposal: Follow all federal, provincial and local regulations for disposal.
Use only licensed disposal and waste hauling companies. Disposal of small
amounts of spilled material may be handled as described under "Leak or Spill
Cleanup". Large spills must be dealt with separately and must be handled by
qualified disposal companies.
Special Shipping Information: Follow all TDG regulations and see
classification in Section I
------------------------------------------------------------------------------
Section IX Preparation Information
------------------------------------------------------------------------------
Prepared by: Technical Affairs Department, BDH Inc.,
Toronto, Ontario
(416) 255-8521
For questions contact: Regulatory Affairs Department, EM Science
Gibbstown, NJ
(856) 423-6300
Date: 04/17/89
Revision date: SEPT 19, 1997; Sep 28, 2000
Note: This product is not controlled by WHMIS.
The statements contained herein are offered for informational purposes only and
are based upon technical data that BDH INC believes to be accurate. It is
intended for use only by persons having the necessary technical skills and at
their own discretion and risk. Since conditions and manner of use are outside
our control, we make NO WARRANTY,EXPRESS OR IMPLIED,OF MERCHANTABILITY,FITNESS
OR OTHERWISE.
|