http://hazard.com/msds/f2/bmp/bmprg.html 09/06/2005 05:12 PM
RMI TITANIUM CO -- TITANIUM SPONGE/POWDER, 020-R -- 3439-00N025604
===================== Product Identification =====================
Product ID:TITANIUM SPONGE/POWDER, 020-R
MSDS Date:02/12/1990
FSC:3439
NIIN:00N025604
MSDS Number: BMPRG
=== Responsible Party ===
Company Name:RMI TITANIUM CO
Address:1000 WARREN AVE
Box:269
City:NILES
State:OH
ZIP:44446
Country:US
Info Phone Num:216-544-7802
Emergency Phone Num:216-544-7655;800-424-9300(CHEMTREC)
Preparer's Name:MICHAEL C. MILLER
CAGE:DO815
=== Contractor Identification ===
Company Name:RMI TITANIUM CO
Address:1000 WARREN AVE
Box:City:NILES
State:OH
ZIP:44446
Country:US
Phone:330-544-7710; 216-544-7802 TECH#
CAGE:99403
Company Name:RMI TITANIUM CO
Address:1000 WARREN AVE
Box:269
City:NILES
State:OH
ZIP:44446-1168
Country:US
Phone:216-652-9951
CAGE:DO815
============= Composition/Information on Ingredients =============
Ingred Name:TITANIUM, METAL
CAS:7440-32-6
RTECS #:XR1700000
Fraction by Wt: 99.0%
OSHA PEL:10 (TIO2)MG/M3 TDUST
ACGIH TLV:10 (TIO2)MG/M3 TDUST
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PRODUCTS UNDER NORMAL CONDITIONS DO
NOT PRESENT AN INHAL, INGEST OR CONTACT HAZ. HOWEVER, OPERATIONS
http://hazard.com/msds/f2/bmp/bmprg.html Page 1 of 3
http://hazard.com/msds/f2/bmp/bmprg.html 09/06/2005 05:12 PM
SUCH AS BURNING, WELDING, SAWING, BRAZING, GRINDING, AND POSSIBLY
MACHINING, ETC., WHICH RESULTS IN ELEVATING TEMP OF PRODUCT AT OR
ABOVE ITS MP OR RESULT IN GENERATION OF AIRBORNE PARTICULATES, MAY
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: PRESENT HEALTH HAZARDS. TOXICITY OF
TITANIUM DIOXIDE HAS BEEN FOUND TO BE RELATIVELY INERT. SKIN
CONTACT WITH TITANIUM DUSTS MAY CAUSE PHYSICAL ABRASION. EYE
CONTACT WITH PURE MATERIAL HAS S HOWN PARTICULATE IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE EXPOSED PERSON TO FRESH AIR. IF BREATHING
IS DIFFICULT OR HAS STOPPED, ADMINISTER ARTIFICAL RESPIRATION OR
OXYGEN AS INDICATED. SEEK MEDICAL ATTENTION PROMPTLY. INGESTION:
CALL MD I MMEDIATELY . SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER.
CALL MD . EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES, SEEK
ASSISTANCE FROM MD .
===================== Fire Fighting Measures =====================
Flash Point:NO FLASH
Extinguishing Media:USE EXTINGUISHERS DESIGNED FOR METAL FIRES, DRY
CHEMICAL POWDERS, SALTS OR INERT GASES.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WHEN EXPOS TO IGNIT SOURCE PROD WILL
IGNITE, BURN W/INTENSE HEAT & LRG QTY OF SMOKE. DO NOT EXTING
W/H*2O. TYPICAL DUST TYPE EXPLO CAN OCCUR. APPLIC (SUPP DATA)
================== Accidental Release Measures ==================
Spill Release Procedures:SHOULD SPILLS OF DUST OCCUR COLLECT MATERIAL
IN APPROPRIATELY LABELED CONTAINERS AND DISPOSE OF PROPERLY. DO NOT
USE COMPRESSED AIR TO CLEAN SPILLS OF DUST. WEAR PERSONAL
PROTECTION EQUIPMENT AS NECES SARY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE WET AND KEEP AWAY FROM HEAT AND
OPEN FLAME-MAINTAIN HUMIDITY ABOVE 50% TO PREVENT AN ELECTROSTATIC
BUILD-UP.
Other Precautions:KEEP WORK AREAS FREE OF WASTE. NO SMOKING IN AREA.
USE NON-SPARKING METAL EQUIPMENT. EXTINGUISHING MEDIA: DRY CHEMICAL
POWDERS, SALTS OR INERT GAS. DO NOT USE WATER OR LIQUID: EXPLOSION
HAZARD COULD R ESULT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:A NIOSH/MSHA APPROVED RESPIRATOR RECOMMENDED FOR
ALL GRINDING, CUTTING, ETC. CONSULT LOCAL SUPPLIER FOR SELECTION OF
APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR BASED ON MAGNITUDE AND
DURATION OF EXPOS URE.
Ventilation:ADEQUATE GENERAL AND/OR LOCAL EXHAUST VENTILATION SHOULD BE
PROVIDED AS NECESSARY.
http://hazard.com/msds/f2/bmp/bmprg.html Page 2 of 3
http://hazard.com/msds/f2/bmp/bmprg.html 09/06/2005 05:12 PM
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZARDS: OF WATER TO BURNING TITANIUM CAN CAUSE AN EXPLOSION DUE
TO EVOLUTION OF HYDROGEN.
================== Physical/Chemical Properties ==================
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:1560C,2840F
Appearance and Odor:GRAY METALLIC SOLID; NO ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
http://hazard.com/msds/f2/bmp/bmprg.html Page 3 of 3
|