MATERIAL SAFETY DATA SHEET
ND
#1700, 407 2 STREET S.W., CALGARY, ALBERTA T2P 2Y3
TELEPHONE: (403) 269-2242 FAX: (403) 269-2251
1-613-996-6666 鈥? CANUTEC 鈥? Transportation Emergency
1-888-243-9771 鈥? ChExSS 鈥? Chemical Exposure
ULTRA SEAL PLUS
SECTION I: IDENTIFICATION OF PRODUCT
Product Use: Lost circulation additive
Product Name: ULTRA SEAL PLUS
TDG Classification: Not regulated
Chemical Family: Organic cellulose fibers
Packaging Group: Not applicable
WHMIS Classification: Not controlled
PIN: Not applicable
Workplace Hazard: Not applicable
SECTION II: HAZARDOUS INGREDIENTS
Ingredients Percent CAS Number LD50 (Species/Route) LC50 (Species/Route)
This product contains no WHMIS controlled products
SECTION III: TOXICOLOGICAL PROPERTIES
Route of entry: Skin Eye Contact Inhalation Ingestion
Effects of acute exposure: May cause mechanical irritation and/or damage to the eyes. May result in irritation of throat and nasal
passages due to dust.
Effects of chronic exposure: Long term contact may result in skin rash and itching due to fibrous nature of the material.
Exposure limits: Not applicable
Irritancy of product: May cause mechanical irritation and/or damage to the eyes. May result in irritation of throat and nasal
passages due to dust.
Sensitization to product: Not applicable
Carcinogenicity: No information available
Reproductive toxicity: No information available
Teratogenicity: No information available
Mutagenicity: No information available
Name of toxicological synergistic products: No information available
1 OF 4
鈥渄edicated to exceeding customer expectations鈥?
ULTRA SEAL PLUS
SECTION IV: FIRST AID MEASURES
Skin contact: If irritation develops wash with soap and water. If irritation persists consult a physician.
Eye contact: Flush with warm running water until particle(s) are removed. If irritation persists, consult a physician.
Inhalation: Move to fresh air. Apply oxygen or artificial respiration as required. If breathing difficulties or distress continues
obtain medical attention
Ingestion: Give one to two glasses of water. If symptoms develop, obtain medical attention. Never give anything by mouth to an
unconscious or convulsive person.
SECTION V: PHYSICAL DATA
Physical state: Solid.
Appearance and odour: Light tan fibrous powder; odourless
Odour threshold: Not applicable
Specific gravity (潞C): 0.613
Vapor pressure (mmHG): Not applicable
Vapor density (Air=1): Not applicable
Evaporation rate: Not applicable
Boiling point (潞C): Not applicable
Freeze/Melting point (潞C): Not applicable
pH (%): Not applicable
2 OF 4
鈥渄edicated to exceeding customer expectations鈥?
ULTRA SEAL PLUS
SECTION VI: FIRE AND EXPLOSION DATA
Conditions of flammability: If in a finely divided and suspended state, treat as a flammable dust.
Means of extinguishing: Water, water fog, chemical, CO2
Flash point: Not applicable
Upper flammable limit: Not applicable
Lower flammable limit: Not applicable
Auto-ignition temperature: Not applicable
Hazardous combustion products: Not applicable
Explosion data-sensitivity to mechanical impact: Not applicable
Explosion data-sensitivity to static discharge: Not applicable
SECTION VII: REACTIVITY DATA
Chemically unstable (conditions): Stable.
Product incompatible with: No incompatible materials known. Avoid ignition sources.
Conditions of reactivity: Avoid ignition sources.
Hazardous decomposition products: None
3 OF 4
鈥渄edicated to exceeding customer expectations鈥?
ULTRA SEAL PLUS
SECTION VIII: PREVENTATIVE MEASURES
Personal protective equipment: Suggest dust mask; nuisance dust. Use an approved respirator with dust cartridges if TLV is
exceeded. Suggest goggles; gloves to protect skin from repeated exposure and long sleeved shirt and trousers to protect from
exposure to dust.
Specific engineering controls: Use adequate ventilation to control concentration below recommended exposure limits. Ensure
eye wash station and emergency shower are available
Procedures for leak/spills: Use appropriate safety equipment. Evacuate area of all unnecessary personnel. Contain spill. Sweep
up and collect uncontaminated material for repackaging. Collect contaminated material in approved containers for disposal.
Waste disposal: Dispose of in accordance with federal, provincial and local regulations. This product can be land-filled in most
locations. Check with local operator. It is the responsibility of the end user to determine if material meets the criteria of
hazardous waste at the time of disposal.
Handling procedures and equipment: Avoid contact with eyes, skin, or clothing. Avoid breathing dust. Wash thoroughly after
handling. Wear protective equipment and/or garments. Launder contaminated clothing before reuse.
Storage requirements: Store in a cool, dry area in sealed containers or bags. Keep containers closed.
Special shipping information: Not applicable
SECTION IX: PREPARATION
Date updated: June 29, 2006 Prepared by: Product Safety Committee
All the recommendations and suggestions herein concerning this product are based upon tests and data believed to be reliable,
however it is the user鈥檚 responsibility to determine the safety, toxicity and sustainability for their own use of the product described
herein. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Q鈥橫ax Solutions Inc.
as to the effects of such use, the results to be obtained, or the safety and toxicity of the product nor does Q鈥橫ax Solutions Inc.
assume any liability arising out of use by others. Nor is the information herein to be considered as absolutely complete since
additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because
of applicable laws or government regulations.
4 OF 4
鈥渄edicated to exceeding customer expectations鈥?
|