AMINOTRI(METHYLENEPHOSPHONIC ACID) (ATMP)
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 25-Jan-2003 CHEMWATCH 10747
A317TC CD 2006/2 Page 1 of 12
Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME
AMINOTRI(METHYLENEPHOSPHONIC ACID)
SYNONYMS
C3-H12-N-O9-P3, ATMP, "phosphonic acid, [nitrilotris(methylene)]tri", "amino
tri(methyl phosphonic acid)", "amino tris(methyl phosphonic acid)", "amino
tris(methane phosphonic acid)", "nitrilotrimethylene phosphonic acid",
"nitrilotris(methylene triphosphonic acid)", "nitrilotris(methyl phosphonic
acid)", "tris(phosphonomethyl) amine", phosphonates,
PROPER SHIPPING NAME
CORROSIVE LIQUID, N.O.S.
PRODUCT USE
Used in the manufacture of deflocculants and sequestrants. Phosphonates ligands
demonstrate a very high affinity for alkali metal ions. They form crystals with
some difficulty and are usually distributed commercially as 25 to 60% aqueous
solutions of acids or sodium salts with technical grade purity.
Organophosphonate chelating compounds are widely used in a broad variety of
applications. Their ability to prevent precipitation of calcium salts at
stoichiometric concentrations finds wide application in water treatment for
scale inhibition and in corrosion inhibition. Other uses include peroxy bleach
stabilisation, span applications in flame-resistant polymers, photographic
processing, ore flotation (aminophosphonic surfactants), actinide separation
processes and analytical chemistry. The high biological activity of
carboxyalkylphosphonates, aminoalkylphosphonates, and alkylenediphosphonates,
make them useful as agents in microfertilisers and pesticides, in agriculture,
as well as drugs and diagnostic reagents in biology and medicine. Impurities
including H3PO4, H3PO3 and ligands of lower denticity, are quite common for
phosphonates.
SUPPLIER
Quantum Chemicals Pty Ltd
70 Quantum Close
Quantum Industrial Park
Dandenong South VIC 3175
Australia
Telephone: 1300 782 688
Emergency Tel: 1300 131 001
Fax: 1300 782 699
AMINOTRI(METHYLENEPHOSPHONIC ACID)
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 25-Jan-2003 CHEMWATCH 10747
A317TC CD 2006/2 Page 2 of 12
Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
HAZARD RATINGS
Flammability
Toxicity
Body Contact
Reactivity
Chronic
SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4
Section 2 - HAZARDS IDENTIFICATION
STATEMENT OF HAZARDOUS NATURE
HAZARDOUS SUBSTANCE. DANGEROUS GOODS. According to the
Criteria of NOHSC, and the ADG Code.
POISONS SCHEDULE
None
RISK
Causes burns.
Risk of serious damage to eyes.
May cause long-term adverse effects in the environment.
Inhalation may produce health damage*.
Cumulative effects may result following exposure*.
* (limited evidence).
SAFETY
Do not breathe gas/fumes/vapour/spray.
Wear eye/face protection.
Use only in well ventilated areas.
Keep container in a well ventilated place.
Keep container tightly closed.
Take off immediately all contaminated clothing.
In case of contact with eyes, rinse with plenty of water and contact Doctor or
Poisons Information Centre.
Section 3 - COMPOSITION / INFORMATION ON INGREDIENTS
NAME CAS RN %
aminotri(methylenephosphonic acid) 6419-19-8 >50
water 7732-18-5 <50
Section 4 - FIRST AID MEASURES
SWALLOWED
If poisoning occurs, contact a doctor or Poisons Information Centre.
鈥? If swallowed do NOT induce vomiting.
AMINOTRI(METHYLENEPHOSPHONIC ACID)
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 25-Jan-2003 CHEMWATCH 10747
A317TC CD 2006/2 Page 3 of 12
Section 4 - FIRST AID MEASURES
鈥? If vomiting occurs, lean patient forward or place on left side (head-down
position, if possible) to maintain open airway and prevent aspiration.
鈥? Observe the patient carefully.
鈥? Never give liquid to a person showing signs of being sleepy or with reduced
awareness; i.e. becoming unconscious
鈥? Give water to rinse out mouth, then provide liquid slowly and as much as
casualty can comfortably drink.
鈥? Seek medical advice.
EYE
If this product comes in contact with the eyes:
鈥? Immediately hold eyelids apart and flush the eye continuously with running
water.
鈥? Ensure complete irrigation of the eye by keeping eyelids apart and away from
eye and moving the eyelids by occasionally lifting the upper and lower lids.
鈥? Continue flushing until advised to stop by the Poisons Information Centre or a
doctor, or for at least 15 minutes.
鈥? Transport to hospital or doctor without delay.
鈥? Removal of contact lenses after an eye injury should only be undertaken by
skilled personnel.
SKIN
If skin or hair contact occurs:
鈥? Immediately flush body and clothes with large amounts of water, using safety
shower if available.
鈥? Quickly remove all contaminated clothing, including footwear.
鈥? Wash skin and hair with running water. Continue flushing with water until
advised to stop by the Poisons Information Centre.
鈥? Transport to hospital, or doctor.
INHALED
鈥? If fumes or combustion products are inhaled remove from contaminated area.
鈥? Lay patient down. Keep warm and rested.
鈥? Prostheses such as false teeth, which may block airway, should be removed,
where possible, prior to initiating first aid procedures.
鈥? Apply artificial respiration if not breathing, preferably with a demand valve
resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if
necessary.
鈥? Transport to hospital, or doctor.
NOTES TO PHYSICIAN
For acute or short term repeated exposures to strong acids:
鈥? Airway problems may arise from laryngeal edema and inhalation exposure. Treat
with 100% oxygen initially.
鈥? Respiratory distress may require cricothyroidotomy if endotracheal intubation
is contraindicated by excessive swelling
鈥? Intravenous lines should be established immediately in all cases where there
is evidence of circulatory compromise.
鈥? Strong acids produce a coagulation necrosis characterised by formation of a
coagulum (eschar) as a result of the dessicating action of the acid on proteins
in specific tissues.
INGESTION:
鈥? Immediate dilution (milk or water) within 30 minutes post ingestion is
recommended.
鈥? DO NOT attempt to neutralise the acid since exothermic reaction may extend the
corrosive injury.
鈥? Be careful to avoid further vomit since re-exposure of the mucosa to the acid
is harmful. Limit fluids to one or two glasses in an adult.
鈥? Charcoal has no place in acid management.
鈥? Some authors suggest the use of lavage within 1 hour of ingestion.
AMINOTRI(METHYLENEPHOSPHONIC ACID)
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 25-Jan-2003 CHEMWATCH 10747
A317TC CD 2006/2 Page 4 of 12
Section 4 - FIRST AID MEASURES
SKIN:
鈥? Skin lesions require copious saline irrigation. Treat chemical burns as
thermal burns with non-adherent gauze and wrapping.
鈥? Deep second-degree burns may benefit from topical silver sulfadiazine.
EYE:
鈥? Eye injuries require retraction of the eyelids to ensure thorough irrigation
of the conjuctival cul-de-sacs. Irrigation should last at least 20-30 minutes.
DO NOT use neutralising agents or any other additives. Several litres of saline
are required.
鈥? Cycloplegic drops, (1% cyclopentolate for short-term use or 5% homatropine for
longer term use) antibiotic drops, vasoconstrictive agents or artificial tears
may be indicated dependent on the severity of the injury.
鈥? Steroid eye drops should only be administered with the approval of a
consulting ophthalmologist).
[Ellenhorn and Barceloux: Medical Toxicology].
Section 5 - FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA
鈥? Water spray or fog.
鈥? Foam.
鈥? Dry chemical powder.
鈥? BCF (where regulations permit).
鈥? Carbon dioxide.
FIRE FIGHTING
鈥? Alert Fire Brigade and tell them location and nature of hazard.
鈥? Wear full body protective clothing with breathing apparatus.
鈥? Prevent, by any means available, spillage from entering drains or water
course.
鈥? Use fire fighting procedures suitable for surrounding area.
鈥? Do not approach containers suspected to be hot.
鈥? Cool fire exposed containers with water spray from a protected location.
鈥? If safe to do so, remove containers from path of fire.
鈥? Equipment should be thoroughly decontaminated after use.
FIRE/EXPLOSION HAZARD
鈥? Combustible.
鈥? Slight fire hazard when exposed to heat or flame.
鈥? Heating may cause expansion or decomposition leading to violent rupture of
containers.
鈥? On combustion, may emit toxic fumes of carbon monoxide (CO).
鈥? May emit acrid smoke.
鈥? Mists containing combustible materials may be explosive.
Combustion products include nitrogen oxides (NOx) and phosphorus oxides (POx).
FIRE INCOMPATIBILITY
Avoid contamination with oxidising agents i.e. nitrates, oxidising acids,
chlorine bleaches, pool chlorine etc. as ignition may result.
HAZCHEM
2X
Personal Protective Equipment
Breathing apparatus.
Gas tight chemical resistant suit.
Limit exposure duration to 1 BA set30 mins.
AMINOTRI(METHYLENEPHOSPHONIC ACID)
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 25-Jan-2003 CHEMWATCH 10747
A317TC CD 2006/2 Page 5 of 12
Section 6 - ACCIDENTAL RELEASE MEASURES
EMERGENCY PROCEDURES
MINOR SPILLS
Clean up all spills immediately.
Avoid contact with skin and eyes.
Wear protective neoprene gloves and chemical goggles.
Wipe up and absorb small quantities with vermiculite or other absorbent
material.
Place in suitable containers for disposal.
Wash spill area with large quantities of water.
MAJOR SPILLS
鈥? Clear area of personnel and move upwind.
鈥? Alert Fire Brigade and tell them location and nature of hazard.
鈥? Wear full body protective clothing with breathing apparatus.
鈥? Prevent, by any means available, spillage from entering drains or water
course.
鈥? Stop leak if safe to do so.
鈥? Contain spill with sand, earth or vermiculite.
鈥? Collect recoverable product into labelled containers for recycling.
鈥? Neutralise/decontaminate residue.
鈥? Collect solid residues and seal in labelled drums for disposal.
鈥? Wash area and prevent runoff into drains.
鈥? After clean up operations, decontaminate and launder all protective clothing
and equipment before storing and re-using.
鈥? If contamination of drains or waterways occurs, advise emergency services.
PROTECTIVE ACTIONS FOR SPILL
PROTECTIVE ACTION ZONE
half
evacuation
downwind
direction
distance
down wind distance
wind isolation
distance
direction
half
evacuation downwind
INITIAL direction distance
ISOLATION
ZONE
From IERG (Canada/Australia)
Isolation Distance 25 metres
Downwind Protection Distance 250 metres
IERG Number 37
FOOTNOTES
1 PROTECTIVE ACTION ZONE is defined as the area in which people are at risk
of harmful exposure. This zone assumes that random changes in wind direction
confines the vapour plume to an area within 30 degrees on either side of the
predominant wind direction, resulting in a crosswind protective action distance
equal to the downwind protective action distance.
2 PROTECTIVE ACTIONS should be initiated to the extent possible, beginning with
those closest to the spill and working away from the site in the downwind
direction. Within the protective action zone a level of vapour concentration
may exist resulting in nearly all unprotected persons becoming incapacitated
and unable to take protective action and/or incurring serious or irreversible
AMINOTRI(METHYLENEPHOSPHONIC ACID)
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 25-Jan-2003 CHEMWATCH 10747
A317TC CD 2006/2 Page 6 of 12
Section 6 - ACCIDENTAL RELEASE MEASURES
health effects.
3 INITIAL ISOLATION ZONE is determined as an area, including upwind of the
incident, within which a high probability of localised wind reversal may
expose nearly all persons without appropriate protection to life-threatening
concentrations of the material.
4 SMALL SPILLS involve a leaking package of 200 litres (55 US gallons) or less,
such as a drum (jerrican or box with inner containers). Larger packages leaking
less than 200 litres and compressed gas leaking from a small cylinder are also
considered "small spills".
LARGE SPILLS involve many small leaking packages or a leaking package of
greater than 200 litres, such as a cargo tank, portable tank or a "one-tonne"
compressed gas cylinder.
5 Guide 154 is taken from the US DOT emergency response guide book.
6 IERG information is derived from CANUTEC - Transport Canada.
SAFE STORAGE WITH OTHER CLASSIFIED CHEMICALS
___________________________________________
+ + + + + +
___________________________________________
+: May be stored together
O: May be stored together with specific preventions
X: Must not be stored together
Personal Protective Equipment advice is contained in Section 8 of the MSDS.
Section 7 - HANDLING AND STORAGE
PROCEDURE FOR HANDLING
鈥? Limit all unnecessary personal contact.
鈥? Wear protective clothing when risk of exposure occurs.
鈥? Use in a well-ventilated area.
鈥? When handling DO NOT eat, drink or smoke.
鈥? Always wash hands with soap and water after handling.
鈥? Avoid physical damage to containers.
鈥? Use good occupational work practice.
鈥? Observe manufacturer's storing and handling recommendations.
SUITABLE CONTAINER
Glass container.
Plastic carboy.
Polyethylene or polypropylene container.
Polylined drum.
鈥? Check that containers are clearly labelled.
Packaging as recommended by manufacturer.
Avoid brass, copper.
STORAGE INCOMPATIBILITY
Avoid reaction with oxidising agents.
STORAGE REQUIREMENTS
鈥? Store in original containers.
鈥? Keep containers securely sealed.
鈥? Store in a cool, dry, well-ventilated area.
鈥? Store away from incompatible materials and foodstuff containers.
鈥? Protect containers against physical damage and check regularly for leaks.
AMINOTRI(METHYLENEPHOSPHONIC ACID)
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 25-Jan-2003 CHEMWATCH 10747
A317TC CD 2006/2 Page 7 of 12
Section 7 - HANDLING AND STORAGE
鈥? Observe manufacturer's storing and handling recommendations.
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE CONTROLS
The following materials had no OELs on our record under the following CAS or Chemwatch (CW) numbers
aminotri(methylenephosphonic acid): No data available for CAS:6419-19-8
water: No data available for CAS:7732-18-5
No exposure limits set by NOHSC or ACGIH.
INGREDIENT DATA
WATER:
No exposure limits set by NOHSC or ACGIH.
PERSONAL PROTECTION
EYE
鈥? Safety glasses with side shields.
鈥? Chemical goggles.
鈥? Full face shield may be required for supplementary but never for primary
protection of eyes
鈥? Contact lenses may pose a special hazard; soft contact lenses may absorb and
concentrate irritants. A written policy document, describing the wearing of lens
or restrictions on use, should be created for each workplace or task. This
should include a review of lens absorption and adsorption for the class of
chemicals in use and an account of injury experience. Medical and first-aid
personnel should be trained in their removal and suitable equipment should be
readily available. In the event of chemical exposure, begin eye irrigation
immediately and remove contact lens as soon as practicable. Lens should be
removed at the first signs of eye redness or irritation - lens should be removed
in a clean environment only after workers have washed hands thoroughly. [CDC
NIOSH Current Intelligence Bulletin 59].
HANDS/FEET
Butyl rubber gloves.
Rubber gloves.
PVC gloves.
Impervious gloves.
Safety footwear.
Rubber boots.
OTHER
鈥? Overalls.
鈥? PVC Apron.
鈥? PVC protective suit may be required if exposure severe.
鈥? Eyewash unit.
鈥? Ensure there is ready access to a safety shower.
AMINOTRI(METHYLENEPHOSPHONIC ACID)
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 25-Jan-2003 CHEMWATCH 10747
A317TC CD 2006/2 Page 8 of 12
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
RESPIRATOR
Selection of the Class and Type of respirator will depend upon the level of
breathing zone contaminant and the chemical nature of the contaminant.
Protection Factors (defined as the ratio of contaminant outside and inside the
mask) may also be important.
Breathing Zone Maximum Half-face Full-Face
Level ppm Protection Factor Respirator Respirator
(volume)
1000 10 AB-AUS P -
1000 50 - AB-AUS P
5000 50 Airline * -
5000 100 - AB-2 P
10000 100 - AB-3 P
100+ Airline**
* - Continuous Flow ** - Continuous-flow or positive pressure demand.
The local concentration of material, quantity and
conditions of use determine the type of personal
protective equipment required.
For further information consult site specific
CHEMWATCH data (if available), or your
Occupational Health and Safety Advisor.
ENGINEERING CONTROLS
General exhaust is adequate under normal operating conditions. Local exhaust
ventilation may be required in specific circumstances. If risk of overexposure
exists, wear approved respirator. Correct fit is essential to obtain adequate
protection. Provide adequate ventilation in warehouse or closed storage areas.
Air contaminants generated in the workplace possess varying "escape" velocities
which, in turn, determine the "capture velocities" of fresh circulating air
required to effectively remove the contaminant.
Type of Contaminant: Air Speed:
solvent " "vapours " degreasing "etc. 0.25-0.5 m/s (50-100 f/min)
" evaporating from tank (in still
air).
aerosols " fumes from pouring 0.5-1 m/s (100-200 f/min.)
"operations " intermittent container
"filling " low speed conveyer
"transfers " "welding " spray "drift "
plating acid "fumes " pickling
(released at low velocity into zone of
active generation)
direct "spray " spray painting in 1-2.5 m/s (200-500 f/min.)
shallow "booths " drum "filling "
conveyer "loading " crusher "dusts "
gas discharge (active generation into
zone of rapid air motion)
grinding " abrasive "blasting " 2.5-10 m/s (500-2000 f/min.)
"tumbling " high speed wheel generated
dusts (released at high initial
velocity into zone of very high rapid
air motion).
Within each range the appropriate value depends on:
Lower end of the range Upper end of the range
1: Room air currents minimal or 1: Disturbing room air currents
favourable to capture
AMINOTRI(METHYLENEPHOSPHONIC ACID)
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 25-Jan-2003 CHEMWATCH 10747
A317TC CD 2006/2 Page 9 of 12
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
2: Contaminants of low toxicity or of 2: Contaminants of high toxicity
nuisance value only.
3: Intermittent, low production. 3: High production, heavy use
4: Large hood or large air mass in 4: Small hood-local control only
motion
Simple theory shows that air velocity falls rapidly with distance away from the
opening of a simple extraction pipe. Velocity generally decreases with the
square of distance from the extraction point (in simple cases). Therefore the
air speed at the extraction point should be adjusted, accordingly, after
reference to distance from the contaminating source. The air velocity at the
extraction fan, for example, should be a minimum of 1-2 m/s (200-400 f/min) for
extraction of solvents generated in a tank 2 meters distant from the extraction
point. Other mechanical considerations, producing performance deficits within
the extraction apparatus, make it essential that theoretical air velocities are
multiplied by factors of 10 or more when extraction systems are installed or
used.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE
Liquid with slight aromatic odour; mixes with water.
PHYSICAL PROPERTIES
Liquid.
Mixes with water.
Corrosive.
Acid.
Molecular Weight: 299.07 Boiling Range (掳C): Not available.
Melting Range (掳C): Not available. Specific Gravity (water=1): Not available.
Solubility in water (g/L): Miscible pH (as supplied): Not applicable
pH (1% solution): Not available. Vapour Pressure (kPa): Not available.
Volatile Component (%vol): Not available. Evaporation Rate: Not available
Relative Vapour Density (air=1): Not available. Flash Point (掳C): Not available.
Lower Explosive Limit (%): Not available. Upper Explosive Limit (%): Not available.
Autoignition Temp (掳C): Not available. Decomposition Temp (掳C): Not available
State: Liquid
Section 10 - CHEMICAL STABILITY AND REACTIVITY INFORMATION
CONDITIONS CONTRIBUTING TO INSTABILITY
鈥? Presence of incompatible materials.
鈥? Product is considered stable.
鈥? Hazardous polymerisation will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
POTENTIAL HEALTH EFFECTS
ACUTE HEALTH EFFECTS
SWALLOWED
The material is corrosive, harmful if swallowed and is capable of causing burns
to mouth, throat, oesophagus, with extreme discomfort, pain.
AMINOTRI(METHYLENEPHOSPHONIC ACID)
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 25-Jan-2003 CHEMWATCH 10747
A317TC CD 2006/2 Page 10 of 12
Section 11 - TOXICOLOGICAL INFORMATION
Considered an unlikely route of entry in commercial/industrial environments.
Small amounts or low dose rates are regarded as practically non-harmful.
EYE
The liquid is extremely discomforting to the eyes and is capable of causing pain
and severe conjunctivitis. Corneal injury may develop, with possible permanent
impairment of vision, if not promptly and adequately treated.
The material may produce moderate eye irritation leading to inflammation.
Repeated or prolonged exposure to irritants may produce conjunctivitis.
SKIN
The liquid is extremely discomforting to the skin and is capable of causing skin
reactions which may lead to dermatitis.
Prolonged exposure may cause chemical burns.
INHALED
Not normally a hazard due to non-volatile nature of product.
The vapour/mist is highly discomforting to the upper respiratory tract and may
cause breathing difficulty.
Inhalation of quantities of liquid mist may be extremely hazardous, even lethal
due to spasm, extreme irritation of larynx and bronchi, chemical pneumonitis and
pulmonary oedema.
CHRONIC HEALTH EFFECTS
Principal routes of exposure are by accidental skin and eye contact and by
inhalation of vapours especially at higher temperatures. Although the salt of
the organophosphate has not been tested, animal testing on the free acid
aminotris(methylenephosphonic) acid revealed loss in body weight and changes in
the weight of the liver, spleen and kidney.
TOXICITY AND IRRITATION
TOXICITY IRRITATION
Oral (rat)LD50: 2100 mg/kg Skin (rabbit): 500 mg/24h
Dermal (rabbit) LD50: >6310 mg/kg Eye (rabbit): 100 mg - Moderate
Oral (quail) LD50: >215 mg/kg
Oral (duck) LD50: >2510 mg/kg
WATER:
No significant acute toxicological data identified in literature search.
Section 12 - ECOLOGICAL INFORMATION
Marine Pollutant:Not Determined
The principal problems of phosphate contamination of the environment relates to
eutrophication processes in lakes and ponds. Phosphorus is an essential plant
nutrient and is usually the limiting nutrient for blue-green algae. A lake
undergoing eutrophication shows a rapid growth of algae in surface waters.
Planktonic algae cause turbidity and flotation films. Shore algae cause ugly
muddying, films and damage to reeds. Decay of these algae causes oxygen
depletion in the deep water and shallow water near the shore. The process is
self-perpetuating because anoxic conditions at the sediment/water interface
causes the release of more adsorbed phosphates from the sediment. The growth of
algae produces undesirable effects on the treatment of water for drinking
purposes, on fisheries, and on the use of lakes for recreational purposes.
AMINOTRI(METHYLENEPHOSPHONIC ACID)
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 25-Jan-2003 CHEMWATCH 10747
A317TC CD 2006/2 Page 11 of 12
Section 13 - DISPOSAL CONSIDERATIONS
鈥? Recycle wherever possible or consult manufacturer for recycling options.
鈥? Consult State Land Waste Authority for disposal.
鈥? Bury or incinerate residue at an approved site.
鈥? Recycle containers if possible, or dispose of in an authorised landfill.
Section 14 - TRANSPORTATION INFORMATION
Labels Required
corrosive
HAZCHEM
2X
Land Transport UNDG:
Dangerous Goods Class: 8 Subrisk: None
UN Number: 1760 Packing Group: III
Shipping Name:CORROSIVE LIQUID, N.O.S.
Air Transport IATA:
ICAO/IATA Class: 8 ICAO/IATA Subrisk: None
UN/ID Number: 1760 Packing Group: III
ERG Code: 8L
Shipping Name: Corrosive liquid, n.o.s. *
Maritime Transport IMDG:
IMDG Class: 8 IMDG Subrisk: None
UN Number: 1760 Packing Group: III
EMS Number: None Marine Pollutant: Not
Determined
Shipping Name: CORROSIVE LIQUID, N.O.S.
Section 15 - REGULATORY INFORMATION
POISONS SCHEDULE
None
REGULATIONS
aminotri(methylenephosphonic acid) (CAS: 6419-19-8) is found on the following
regulatory lists;
Australia Inventory of Chemical Substances (AICS)
International Council of Chemical Associations (ICCA) - High Production Volume
List
OECD Representative List of High Production Volume (HPV) Chemicals
AMINOTRI(METHYLENEPHOSPHONIC ACID)
Chemwatch Material Safety Data Sheet (REVIEW)
Issue Date: 25-Jan-2003 CHEMWATCH 10747
A317TC CD 2006/2 Page 12 of 12
Section 16 - OTHER INFORMATION
This document is copyright. Apart from any fair dealing for the purposes of
private study, research, review or criticism, as permitted under the Copyright
Act, no part may be reproduced by any process without written permission from
CHEMWATCH. TEL (+61 3) 9572 4700.
Issue Date: 25-Jan-2003
Print Date: 28-Jun-2006
|