MATERIAL SAFETY DATA SHEET
MSDS Number 635105BA
MSDS Name 635-105 CORROSTOP ULTRA
SECTION 1 - PRODUCT IDENTIFICATION & COMPANY INFORMATION
MSDS Number 635105BA
Product Name 635-105 CORROSTOP ULTRA
Company identification SICO PRODUCTION INC.
2505 De la Metropole
Longueuil QC J4G 1E5
CANADA
Contact Service au client/Customer Service/Servicio con cliente
Telephone 450 442-7999
Fax number 450 646-7699
Prepared by Regulatory Department
Regulatory telephone 514 495-5710
Emergency contact CANUTEC
Emergency telephone 613 996-6666
Type of product SOLVENT BASE AEROSOL
SECTION 2 - COMPOSITION AND INFORMATION ON HAZARDOUS INGREDIENTS
Ingredient Name CAS # Concentration (w/w)
ACETONE 67-64-1 10-30%
PROPANE 74-98-6 10-30%
TOLUENE 108-88-3 10-30%
PROPYLENE GLYCOL METHYL ETHER ACETATE 108-65-6 5-10%
ISOBUTANE 75-28-5 5-10%
PROPYLENE GLYCOL METHYL ETHER 107-98-2 1-5%
DIACETONE ALCOHOL 123-42-2 1-5%
n-BUTYL ACETATE 123-86-4 1-5%
SECTION 3 - HAZARDS IDENTIFICATION
EYE CONTACT
The material is highly irritating and may cause tearing, reddening and burning..
Page 1 of 10
MSDS Revision date 03-NOV-2005
MATERIAL SAFETY DATA SHEET
MSDS Number 635105BA
MSDS Name 635-105 CORROSTOP ULTRA
The effects are usually reversible.
SKIN CONTACT
The material is moderately irritating. Repeated or prolonged contact increases the
irritation.
INHALATION HAZARDS
Moderately irritating for the nose, throat, upper respiratory track and lungs.
INGESTION HAZARDS
Harmful or fatal if swallowed.
Do not swallow.
May cause nausea, vomiting, diarrhea, gastro-intestinal irritation and ulceration.
SECTION 4 - FIRST AID MEASURES
EYE CONTACT
Seek immediate medical attention.
In case of contact, immediately flush eyes with plenty of water for at least 5
minutes. Get medical attention.
SKIN CONTACT
If the irritation persists, repeat the washing procedure.
Wash the skin thoroughly with plenty of lukewarm water using a mild and
non-abrasive soap.
Remove contaminated clothes and wash them before reuse.
INHALATION
Remove the victim to fresh air.
If breathing is difficult, oxygen should be administered.
INGESTION
Page 2 of 10
MSDS Revision date 03-NOV-2005
MATERIAL SAFETY DATA SHEET
MSDS Number 635105BA
MSDS Name 635-105 CORROSTOP ULTRA
Do not induce vomiting unless directed to do so by medical personnel.
Seek immediate medical attention.
SECTION 5 - FIRE FIGHTING MEASURES
Flash point: Not applicable
Lower flam. limit (%): Not applicable
Upper flammable limit (%): Not applicable
Auto Ignition Point: Not applicable
FLAMMABLE PROPERTIES
Closed containers of this material may build up pressure if exposed to intense heat
and may explode. .
Vapors may form, with air, an explosive mixture between lower and upper flammable
limits.
HAZARDOUS COMBUSTION PRODUCTS
Carbon monoxide
Carbon dioxide
Other unidentified compounds.
EXTINGUISHING MEDIA
Chemical foam
Carbon dioxide (CO2)
Dry chemical
FIRE FIGHTING INSTRUCTIONS
Evacuate all persons from the fire area to a safe location. If fire is small, uses
an extinguisher and ensures you an exit. If fire grows bigger quickly, leave
immediately.
Wear a self-sufficient breathing apparatus.
SECTION 6 - MEASURES FOR ACCIDENTAL SPILL OR RELEASE
Page 3 of 10
MSDS Revision date 03-NOV-2005
MATERIAL SAFETY DATA SHEET
MSDS Number 635105BA
MSDS Name 635-105 CORROSTOP ULTRA
CLEAN-UP
Remove all sources of ignition.
Transfer the absorbed material into a waste container.
Handle as a highly flammable liquid.
Ventilate the area.
Absorb the spill by using an inert material (sand, earth, vermiculite).
REPORTING
For Canadian, report to the applicable Provincial Environment Ministry.
SECTION 7 - HANDLING AND STORAGE
HANDLING
Harmful if swallowed.
Avoid breathing the vapors or spray mist.
Avoid repeated or prolonged contact with the skin.
Avoid contact with eyes.
STORAGE
Keep away from heat, sparks and flame.
Store in a cool, dry and well-ventilated area.
SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
CAS # Authority Type Dose
67-64-1 ACGIH STEL 1000 PPM
ACGIH TLV 750 PPM
OSHA PEL 750 PPM
OSHA STEL 1000 PPM
74-98-6 ACGIH TLV 1000 PPM
108-88-3 ACGIH STEL 150 PPM
ACGIH TLV 50 PPM
Page 4 of 10
MSDS Revision date 03-NOV-2005
MATERIAL SAFETY DATA SHEET
MSDS Number 635105BA
MSDS Name 635-105 CORROSTOP ULTRA
ACGIH TLV-C 50 PPM
OSHA PEL 100 PPM
OSHA STEL 150 PPM
108-65-6 ACGIH TLV 100 PPM
75-28-5 ACGIH TLV 1000 PPM
107-98-2 ACGIH STEL 150 PPM
ACGIH TLV 100 PPM
OSHA PEL 100 PPM
OSHA STEL 150 PPM
123-86-4 ACGIH STEL 200 PPM
ACGIH TLV 150 PPM
ACGIH TLV-C 2000 PPM
OSHA PEL 150 PPM
OSHA STEL 200 PPM
123-42-2 ACGIH TLV 50 PPM
OSHA PEL 50 PPM
ENGINEERING CONTROLS
Provide sufficient ventilation to maintain the exposure levels below the limits.
Keep away from food, drinks and tobacco.
RESPIRATORS
Avoid breathing vapors or spray mist.
Use a NIOSH approved air-inducted respirator when the exposure levels are exceeded.
A NIOSH approved air-purifying respirator with the appropriate chemical cartridge
may also reduce exposure, however protection provided by air purigying respirators
is limited. Determine the proper level of protection by conducting appropriate
air-monitoring.
Use a dust particle mask when sanding.
OTHER CLOTHING
DO NOT WEAR contact lenses when working with paints and paint related materials..
Page 5 of 10
MSDS Revision date 03-NOV-2005
MATERIAL SAFETY DATA SHEET
MSDS Number 635105BA
MSDS Name 635-105 CORROSTOP ULTRA
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Form: Aerosol.
Color: Colored or white.
Odor: Solvents.
Odor threshold (ppm): Not available
Partition coef. oil/ water: Not available
pH: Not applicable
Freezing Point: Not available
Boiling temperature: Not applicable
Evaporation rate: Not applicable
Vapor pressure at 20掳C: Not available
Volatile weight (%): 90
Volatile Volume (%): Not available
Specific gravity (kg/L): .75
Coating VOC (g/L): Not available
SECTION 10 - STABILITY AND REACTIVITY
CONDITIONS TO AVOID
Sparks
High heat
flame
SENSIBILITY TO STATIC DISCHARGE
No
SENSITIVITY TO MECANICAL SHOCK
Yes
INCOMPATIBILITY WITH OTHER MATERIALS
Strong oxidizing material
Page 6 of 10
MSDS Revision date 03-NOV-2005
MATERIAL SAFETY DATA SHEET
MSDS Number 635105BA
MSDS Name 635-105 CORROSTOP ULTRA
HAZARDOUS DECOMPOSITION PRODUCTS
Not available
SECTION 11 - TOXICOLOGICAL INFORMATION
CAS # Exposure Route Species Dose
67-64-1 LD50 Oral Rat, adult 5800 mg/kg
LC50 Inhalation Rat, adult 19000 mg/M3
TDLo Inhalation Man 10 mg/M3
TCLo Inhalation Man 12000 PPM
LDLo Intravenous Mouse 4000 mg/kg
LD50 Intravenous Rat, adult 5500 mg/kg
LDLo Intraperitoneal Rat, adult 500 mg/kg
LD50 Intraperitoneal Mouse 1297 mg/kg
TDLo Oral Man 2857 mg/kg
LDLo Oral Dog, adult 8000 mg/kg
LD50 Skin Rabbit, adult 20000 mg/kg
74-98-6 LC50 Inhalation Rat, adult 360600 mg/M3
108-88-3 LD50 Oral Rat, adult 5000 mg/kg
LD50 Subcutaneous Rat, adult 2600 mg/kg
LD50 Subcutaneous Rabbit, adult 12124 mg/kg
TCLo Inhalation Man 100 PPM
TDLo Oral Human 50 mg/kg
LCLo Inhalation Rat, adult 4000 PPM
LD50 Intraperitoneal Rat, adult 1332 mg/kg
LD50 Intravenous Rat, adult 1960 mg/kg
LD50 Subcutaneous Mouse 2250 mg/kg
LD50 Skin Rabbit, adult 12124 mg/kg
LC50 Inhalation Rat, adult 30152 mg/M3
108-65-6 LD50 Oral Rat, adult 8500 mg/kg
LC50 Inhalation Rat, adult 5322 PPM
LD50 Skin Rabbit, adult 5000 mg/kg
Page 7 of 10
MSDS Revision date 03-NOV-2005
MATERIAL SAFETY DATA SHEET
MSDS Number 635105BA
MSDS Name 635-105 CORROSTOP ULTRA
75-28-5 LC50 Inhalation Mouse 874 mg/M3
107-98-2 LD50 Skin Rabbit, adult 13000 mg/kg
LDLo Oral Rat, adult 3739 mg/kg
LC50 Inhalation Rat, adult 11180 PPM
LD50 Oral Rat, adult 5660 mg/kg
TCLo Inhalation Human 3000 PPM
LCLo Inhalation Rat, adult 7000 PPM
LD50 Intraperitoneal Rat, adult 3720 mg/kg
LD50 Intravenous Rat, adult 4200 mg/kg
LD50 Subcutaneous Rat, adult 7800 mg/kg
123-86-4 LD50 Oral Rat, adult 10768 mg/kg
LD50 Skin Rabbit, adult 17600 mg/kg
LC50 Inhalation Rat, adult 2000 PPM
123-42-2 TCLo Inhalation Human 400 PPM
LC50 Inhalation Rat, adult 2121 PPM
LD50 Intraperitoneal Mouse 933 mg/kg
LD50 Oral Rat, adult 4000 mg/kg
LD50 Skin Rabbit, adult 13500 mg/kg
CARCINOGENICS EFFECTS
No recorded data was found.
MUTAGENIC EFFECTS
No recorded data was found.
TERATOGENIC EFFECTS
No recorded data was found.
DEVELOPMENTAL EFFECTS
No recorded data was found.
CHRONIC EFFECTS
No recorded data was found.
Page 8 of 10
MSDS Revision date 03-NOV-2005
MATERIAL SAFETY DATA SHEET
MSDS Number 635105BA
MSDS Name 635-105 CORROSTOP ULTRA
SECTION 12 - ECOLOGICAL INFORMATION
SECTION 13 - DISPOSAL CONSIDERATIONS
Dispose in accordance with applicable Federal, Provincial, state and municipal
regulations.
SECTION 14 - TRANSPORT INFORMATION
UN Number 1950
UN Classification 2.1
Shipping name AEROSOLS, flammable
Note: For containers of 1 Litre or less, EXEMPTED from Transport of Dangerous Goods
by Road according to exemption of article 1.17 (Limited Quantity).
SECTION 15 - REGULATORY INFORMATION
HMIS Health Code 2 - Moderate Hazard
HMIS Fire Code 3 - Serious Hazard
HMIS Reactivity Code 1 - Slight Hazard
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled Product
Regulations except for the use of 16 headings instead of 9.
WHMIS CLASS
A - Compressed gas
B5 - Flammable aerosols
D2A - Very toxic materials causing other toxic effects
D2B - Toxic materials causing other toxic effects
SECTION 16 - OTHER INFORMATION
The manufacturer hereby declares that the information disclosed herein have been
based on our raw material suppliers' data, information and notification. Such raw
materials are being used as components in the manufacturing of the product. The
Page 9 of 10
MSDS Revision date 03-NOV-2005
MATERIAL SAFETY DATA SHEET
MSDS Number 635105BA
MSDS Name 635-105 CORROSTOP ULTRA
manufacturer has no control over the nature and content of such information. The
manufacturer fully reproduces all the information it holds on the constituent of the
product, at the time it is manufactured. The manufacturer does not assume any
liability whatsoever for the accuracy or completeness of the information contained
herein. Final determination of suitability of any material is the sole
responsibility of the user. By this data sheet, the manufacturer hereby discloses
all the potential dangers it has knowledge of and which might be related to the
using or manipulation of the product in order to allow the proper care to be brought
and use with regard to the product. Materials used may present unknown hazards and
should be used with caution. Although certain hazards are described herein, we
cannot guarantee that these are the only hazards which exist and notification is
hereby given to the user. The product must be handled with care and it is
recommended to use all the required measures in order to ensure the protection and
safety of any person using or handling the product. Notice is hereby given that
injury can derive therefrom if the foregoing is not respected. The manufacturer
assumes no responsibility for personal and/or material damage, lost or injury of
whichever nature caused or which may occur following the wrongful, inappropriate,
negligent or abusive use or handling of the product or from not having read the
herein contained information.
Page 10 of 10
MSDS Revision date 03-NOV-2005
|