MATERIAL
Linde Gas LLC (216) 642-6600
LindeGAS,LLC (216) 642-6600
Gas
AGA INC. SAFETY
P.O. Box 94737
Box 94737
P.O. ROCKSIDE WOODS BLVD
6055 DATA SHEET
Cleveland, Ohio 44101
Cleveland, Ohio 44101
P.O. BOX 94737
www.us.lindegas.com
www.us.lindegas.com
CLEVELAND, OH 44101-4737 No. 168
02= 7782-42-7
PRODUCT NAME CAS #
Greater Than 23.5% Oxygen in Nitrogen N2= 7727-37-9
DOT I.D. No.:
UN 1956
TRADE NAME AND SYNONYMS
Compressed Gas, N.O.S. (D.O.T.)
DOT Hazard Class:
Division 2.2
CHEMICAL NAME AND SYNONYMS
Formula
>23.5 Molar % O2 in N2
>23.5 Molar % Oxygen in Nitrogen
ISSUE DATES AND REVISIONS Chemical Family:
Gas Mixtures
April 1997
HEALTH HAZARD DATA
TIME WEIGHTED AVERAGE EXPOSURE LIMIT
Nitrogen is a simple asphyxiant (ACGIH 1996); and Oxygen is the 鈥渧ital element鈥? in the
atmosphere in which we live and breathe. OSHA 1996 does not list (Continued on Page 4)
SYMPTOMS OF EXPOSURE
Breathing high concentrations (greater than 75 Molar % Oxygen) causes symptoms of hyperoxia which includes
cramps, nausea, dizziness, hypothermia, amblyopia, respiratory difficulties, bradycardia, fainting spells, and
convulsions capable of leading to death.
For additional information on hyperoxia, see Compressed Gas Association鈥檚 Pamphlet P-14.
TOXICOLOGICAL PROPERTIES
The property is that of hyperoxia which leads to pneumonia. Concentrations between 25
and 75 molar percent oxygen present a risk of inflammation of organic matter in the body
Neither oxygen or nitrogen are listed in the IARC, NTP or by OSHA as a carcinogen or potential carcinogen.
Persons in ill health where such illness would be aggravated by exposure to these mixtures should not be allowed to
work with or handle these products.
RECOMMENDED FIRST AID TREATMENT
PROMPT MEDICAL ATTENTION IS MANDATORY IN ALL CASES OF OVEREXPOSURE TO THESE MIXTURES.
RESCUE PERSONNEL SHOULD BE COGNIZANT OF EXTREME FIRE HAZARD ASSOCIATED WITH OXYGEN
RICH ATMOSPHERES.
Consciuos persons should be assisted to an uncontaminated area and breathe fresh air. They should be kept warm
and quiet. The physician should be informed that the victim is experiencing (has experienced) hyperoxia.
Unconsciuos persons should be moved to an uncontaminated area and given assisted respiration When breathing has
been restored, treatment should be as above. Continued treatment. should be sympotmatic and supportive.
Information contained in this material safety data sheet is offered without charge for use by technically qualified personnel at their discretion and
risk. All statements, technical information and recommendations contained herein are based on tests and data which we believe to be reliable, but
the accuracy or completeness thereof is not guaranteed and no warranty of any kind is made with respect thereto. This information is not intended
as a license to operate under or a recommendation to practice or infringe any patent of this Company or others covering any process, composition
of matter or use.
Since the Company shall have no control of the use of the product described herein, the Company assumes no liability for loss or damage incurred
from the proper or improper use of such product.
Greate r Than 23.5% Oxygen in Nitrogen
HAZARDOUS MIXTURES OF OTHER LIQUIDS, SOLIDS, OR GASES
These mixtures vigorously accelerate combustion. Contact with all flammable materials should be avoided. Some
materials which are not flammable in air will burn in oxygen enriched atmospheres.
PHYSICAL DATA
02= -297.3潞F (-182.9潞C)
BOILING POINT LIQUID DENSITY AT BOILING POINT
See Page 4
N2= -320.5潞F (-195.8潞C)
VAPOR PRESSURE GAS DENSITY AT 70掳F. 1 atm
See Page 4 See Page 4
02 = slightly 0 2= -361.8潞F (-218.8潞C)
SOLUBILITY IN WATER FREEZING POINT
N2 = very slightly N2= -345.9潞F (-209.9潞C)
EVAPORATION RATE @70潞F (21.1潞C) O2 = 1.11
SPECIFIC GRAVITY (AIR=1)
N/A (Gas) @70潞F (21.1潞C) N2 = 0.97
Colorless, odorless qas
APPEARANCE AND ODOR
FIRE AND EXPLOSION HAZARD DATA
AUTO IGNITION TEMPERATURE
FLASH POINT (Method used) FLAMMABLE LIMITS % B VOLUME (See Page 4)
Y
N/A N/A N/A N/A
LE UEL
ELECTRICAL CLASSIFICATION
EXTINGUISHING MEDIA
Nonhazardous
Copious quantities of water for fires with this mixture as the oxidize r.
SPECIAL FIRE FIGHTING PROCEDURES
If possible, stop the flow of this mixture which is supporting the fire. are involved in a fire, safely relocate or keep cool
with water spra y. If cylinders are involved in a fire, safely relocate or keep cool with water spra y.
UNUSUAL FIRE AND EXPLOSION HAZARDS
Vigorously accelerates combustion.
REACTIVITY DATA
STABILITY CONDITIONS TO AVOID
Unstable None
Stable X
INCOMPATIBILITY (Materials toavoid)
All flammable materials
HAZARDOUS DECOMPOSITION PRODUCTS None
HAZARDOUS POLYMERIZATION CONDITIONS TO AVOID
May Occur
None
Will Not Occur X
SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
Evacuate all personnel from the a ffected area. Use apporiate protective equipment. [f leak is in use r鈥檚 equipment, be
certain to purge piping with an inert gas prior to attempting repairs. If leak is in container or container valve, contact
your closest supplier location or call the emergency telephone number listed herein.
WASTE DISPOSAL METHOD
Do not attempt to dispose of waste or ubused quantities. Heturn in the shipping container properly labeled, with any
valve-outlet plugs or caps secured and valve protection cap in place to your supplie r.For emergency d~sposal
assistance, contact your closest supplier location or call the emergency telephone number listed herein.
2
Greater Than 23.5% Oxygen in Nitrogen
SPECIAL PROTECTION INFORMATION
N/A
RESPIRATORY PROTECTION
(Specify type)
VENTILATION LOCAL EXHAUST SPECIAL
N/A
To prevent accumulation above 25 molar percent oxygen
See Local Exhaust
MECHANICAL (Gen.) OTHER
N/A
N/A
PROTECTIVE GLOVES
As required. any material
EYE PROTECTION
Safety goggles or glasses
OTHER PROTECTIVE EQUIPMENT
Safety shoes, safety shower
SPECIAL PRECAUTIONS*
SPECIAL LABELING INFORMATION
DOT Shipping Name: Compressed gas, n.o.s. DOT Hazard Class: Division 2 2
DOT Shipping Labels: Nonflammable Gas; Oxidizer I.D. No.: UN 1956
SPECIAL HANDLING RECOMMENDATIONS
Use only in well-ventilated areas. Valve protection caps and valve outlet threaded plugs must remain in place unless
container is secured with valve outlet piped to use point. Do not drag, slide or roll cylinders. Use a suitable hand truck
for cylinder movement. Use a pressure reducing regulator when connecting cylinder to lower pressure (<3,000 psig)
piping or systems. Do not heat cylinder by any means to increase the discharge rate of product from the cylinder. Use
a check valve or trap in the discharge line to prevent hazardous back flow into the cylinder.
For additional handling recommendations, consult Compressed Gas Associ P-1, P-14, and G-4.
SPECIAL STORAGE RECOMMENDATIONS
Protect cylinders from physical damage. Store in cool, dry, well-ventilated area away from heavily trafficked areas and
emergency exits and away from full or empty stored cylinders which contain flammable products. Do not allow the
temperature where cylinders are stored to exceed 125潞F (52潞C). Cylinders should be stored upright and firmly secured
to prevent falling or being knocked over. Full and empty cylinders should be segregated. Use a 鈥渇irst in- first out鈥?
inventory system to prevent full cylinders being stored for excessive periods of time.
For additional storage recommendations, consult Compressed Gas Association鈥檚 Pamphlets P-1, P-14, and G-4.
SPECIAL PACKAGING RECOMMENDATIONS
Carbon steels and low alloy steels are acceptable for use at lower pressures. For high pressure applications use
stainless steels, copper and its alloys, nickel and its alloys, brass, bronze, silicon alloys, Monel庐, Inconel庐, or
beryllium. Lead and silve or lead and tin alloys are good gasketing materials. Telfon庐 and Kel-F庐 are the preferred
nomental gaskets.
Special Note: It should be recognized that the ignition temperature of metals and nonmetals in high oxygen content
service decreases with increasing oxygen pressure.
OTHER RECOMMENDATIONS OR PRECAUTIONS
These mixtures should not be used as a substitue for compressed air in pneumatic equipment since this type generally
contains flammable lubricants. Equipment to contain these mixtures must be 鈥渃leaned for oxygen service鈥?. See
Compressed Gas Association Pamphlet G-4.1.
Compressed gas cylinders should not be refilled except by qualified producers of compressed gasses. Shipment of a
compressed gas cylinder which has not been filled by the
(Continued on Page 4)
*Various Government Agencies (i.e. Department of Transportation, Occupational Safety and Health Administration, Food and Drug Administration
3
and others) may have specific regulations concerning the transportation, handling, storage or use of this product which will not be reflected in this
data sheet. The customer should review these regulations to ensure that he is in full compliance.
Greater Than 23.5% Oxygen in Nitrogen
HEALTH HAZARD DATA
TIME WEIGHTED AVERAGE EXPOSURE LIMIT: (Continued)
a PEL (73 hr. TWA) for Nitrogen or Oxygen.
PHYSICAL DATA: (Continued)
LIQUID DENSITY AT BOILING POINT: O2= 71.23 lb/ft3 (1141 kg/m3)
N2= 50.46 lb/ft3 (808.3kg/m3 )
VAPOR PRESSURE @70潞F (21.1潞C) O2= Above the critical temp. of -181.1潞F (-118. 4潞C)
N2= Above the critical temp. of -232.6潞F (-147潞C)
GAS DENSITY AT 70潞F 1 atm: O2= .0828 lb/ft3 (1.326 kg/m3)
N2= .0725 1b/ft3 (1.161 kg/m3)
SPECIAL PRECAUTIONS:
OTHER RECOMMENDATIONS OR PRECAUTIONS: (Continued)
owner or with his(written)consent is a violation of Federal Law (49CFR).
Always secure cylinders in an upright position before transporting them. NEVER transport cylinders in trunks of vehicles,
enclosed vans, truck cabs or in passenger compartments. Transport cylinders secured in open flatbed or in open pick-up
type vehicles.
Reporting under SARA, Title III, Section 313 not required.
NFPA 704 No. for these mixtures = 1 0 0 OX
4
|