MATERIAL SAFETY DATA SHEET
PENNZOIL庐 SYNTHETIC BLEND MOTOR OIL - ALL GRADES
1. PRODUCT AND COMPANY IDENTIFICATION MSDS Number: 16034
Version Date: 11/27/01
Product Name: PENNZOIL庐 SYNTHETIC BLEND MOTOR OIL - ALL GRADES
Product Use: Engine oil
Synonyms: SAE 5W30, 10W30, 15W40, 20W50
Company Information Phone Numbers
SOPUS Products Medical Emergency: 1-800-546-6040
P.O. Box 4427 Transportation Emergency (USA): 1-800-424-9300
Houston, TX 77210-4427 Transportation Emergency (International):
USA 1-703-527-3887 (Call Collect)
MSDS Assistance: 1-800-546-6227
Fax On Demand: 1-800-546-6227
Technical Assistance: 1-800-458-4998
Customer Service: 1-800-468-8397
Fax Number: 713-217-3181
Internet Address: www.MSDS.PZLQS.com
______________________________________________________________________________________
2. COMPONENT INFORMATION
Comp onent CAS No. Weight Percent Hazardous
Range in Blend
SYNTHETIC BASE OILS MIXTURE < 30 No
DETERGENT INHIBITOR MIXTURE 5 - 15 No
VISCOSITY INDEX IMPROVER MIXTURE 5 - 10 No
POUR POINT DEPRESSANT MIXTURE <1 No
BASE LUBRICATING OILS MIXTURE 60 - 95 No
Under normal conditions of use or in a foreseeable emergency, this product does not meet the definition of
a hazardous chemical when evaluated according to the OSHA Hazard Communication Standard, 29 CFR
1910.1200.
Other: No information available
___________________________________________________________________________________
3. HAZARDS IDENTIFICATION
Emergency and Hazards Overview
CAUTION: Contains Synthetic and Petroleum Lubricant.
Repeated skin contact can cause skin disorders.
NFPA Ratings: Health 0 Flammability 1 Reactivity 0
Primary Route of Exposure: Skin X Inhalation -- Eye --
Health Effect Information
Eye Contact: This product is expected to be practically non-irritating upon direct contact.
Skin Contact: This product is minimally irritating to the skin upon direct contact. Prolonged or repeated
contact may result in slight skin irritation.
Inhalation: This product is not expected to pose an inhalation hazard under conditions of normal use or
forseeable misuse. This product has a low vapor pressure and is not expected to present an
inhalation hazard at ambient conditions. Caution should be taken to prevent aerosolization or
misting of this product. Acute and chronic overexposures generated under unusual conditions may
be irritating to the respiratory tract.
MATERIAL SAFETY DATA SHEET
PENNZOIL庐 SYNTHETIC BLEND MOTOR OIL - ALL GRADES
MSDS Number: 16034 Page 2 of 7
Ingestion: This product is regarded as having a low order of toxicity. There are no known adverse effects
based on current references.
Medical Conditions Aggravated by Exposure: Drying and chapping may make the skin more susceptible
to other irritants, sensitizers and disease.
Other: No information available
___________________________________________________________________________________
4. FIRST AID INFORMATION
Eye Contact: Immediately flush eyes with large amounts of water and continue flushing until irritation
subsides. If material is hot, treat for thermal burns and seek immediate medical attention.
Skin Contact: No treatment is necessary under ordinary circumstances. Remove contaminated clothing.
Wash contaminated area thoroughly with soap and water. If material is hot, submerge injured area
in cold water. If victim is severely burned, remove to a hospital immediately.
Inhalation: This material has a low vapor pressure and is not expected to present an inhalation exposure at
ambient conditions. If vapor or mist is generated when the material is heated, and the victim
experiences signs of respiratory tract irritation, remove to fresh air.
Ingestion: No treatment is necessary under ordinary circumstances. Do not induce vomiting. This material
does not present any known ingestion hazard.
Notes to Physician: No information available
Other: No information available
______________________________________________________________________________________
5. FIRE AND EXPLOSION INFORMATION
Flammable Properties
Flash Point: >300 F, >148.9 C Test Method: ASTM D-92 (C.O.C.)
Flammable Limits in Air
Upper Percent: No data available
Lower Percent: No data available
Autoignition Temperature: No data available Test Method: No information available
NFPA Classification: Class III-B combustible liquid
Extinguishing Media: Use dry chemical, foam, or carbon dioxide.
Fire Fighting Measures
Special Fire Fighting Procedures and Equipment: Water may be ineffective but can be used to cool
containers exposed to heat or flame to prevent vapor pressure buildup and possible container
rupture. Caution should be exercised when using water or foam as frothing may occur, especially
if sprayed into containers of hot, burning liquid.
Unusual Fire and Explosion Conditions: Dense smoke may be generated while burning. Carbon
monoxide, carbon dioxide, and other oxides may be generated as products of combustion.
Hazardous Combustion By-Products: None
MATERIAL SAFETY DATA SHEET
PENNZOIL庐 SYNTHETIC BLEND MOTOR OIL - ALL GRADES
MSDS Number: 16034 Page 3 of 7
Other: No information available
______________________________________________________________________________________
6. ACCIDENTAL RELEASE MEASURES
Personnel Safeguards: Consult Health Effect Information in Section 3, Personal Protection Information in
Section 8, Fire and Explosion Information in Section 5, and Stability and Reactivity Information
in Section 10.
Regulatory Notifications: Notify appropriate authorities of spill.
Containment and Clean up: Contain spill immediately. Do not allow spill to enter sewers or
watercourses. Large spills may be picked up using vacuum pumps, shovels, buckets, or other
means and placed in drums or other suitable containers.
Other: No information available
______________________________________________________________________________________
7. HANDLING AND STORAGE INFORMATION
Handling: Fire extinguishers should be kept readily available. See NFPA 30 and OSHA 1910.106--
Flammable and Combustible Liquids.
Storage: Do not transfer to unmarked containers. Store in closed containers away from heat, sparks, open
flame, or oxidizing materials. See also additional information section below.
Empty Container Warnings
Drums: Empty drums should be completely drained, properly bunged and promptly returned to a drum
reconditioner, or properly disposed. Empty containers retain product residue and can be
dangerous.
Plastic: Do not reuse this container. Empty container may retain product residues.
Other: No information available
______________________________________________________________________________________
8. EXPOSURE CONTROLS / PERSONAL PROTECTION INFORMATION
Exposure Limits and Guidelines
This product does not contain any components with OSHA or ACGIH exposure limits.
Personal Protective Equipment
Eye/Face Protection: Eye protection is not required under conditions of normal use. If material is
handled such that it could be splashed into eyes, wear plastic face shield or splash-proof safety
goggles.
Skin Protection: No skin protection is required for single, short duration exposures. For prolonged or
repeated exposures, use impervious clothing (boots, gloves, aprons, etc.) over parts of the body
subject to exposure. If handling hot material, use insulated protective clothing (boots, gloves,
aprons, etc.). Launder soiled clothes. Properly dispose of contaminated leather articles including
shoes, which cannot be decontaminated.
Respiratory Protection: Respiratory protection is not required under conditions of normal use. If vapor
or mist is generated when the material is heated or handled, use an organic vapor respirator with a
dust and mist filter. All respirators must be NIOSH certified. Do not use compressed oxygen in
hydrocarbon atmospheres.
Personal Hygiene: Always wash hands and face with soap and water before eating, drinking, or smoking.
Consumption of food and beverage should be avoided in work areas where this product is present.
MATERIAL SAFETY DATA SHEET
PENNZOIL庐 SYNTHETIC BLEND MOTOR OIL - ALL GRADES
MSDS Number: 16034 Page 4 of 7
Engineering Controls / Work Practices
Ventilation: General room ventilation is normally sufficient. If vapor or mist is generated when the
material is heated or handled, adequate ventilation in accordance with good engineering practice
must be provided to maintain concentrations below the specified exposure or flammable limits.
Other: No information available
______________________________________________________________________________________
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Bright and clear
Odor: No information available Vapor Pressure: No data available
Physical state: Liquid Vapor Density (air=1): No data available
pH: No data available Percent Volatile by Volume: No data available
Boiling Point: No data available Volatile Organic Content: No data available
Melting Point: No data available Molecular Weight: No data available
Specific Gravity: < 1 Average Carbon Number: No data available
Pour Point: No data available Viscosity @ 100 F: No data available
Viscosity @ 40 C: No data available
Solubility in Water: Insoluble in water
Octanol / Water Coefficient: Log Kow = No data available
______________________________________________________________________________________
10. STABILITY AND REACTIVITY INFORMATION
Chemical Stability: Stable
Conditions to Avoid: None
Incompatible Materials to Avoid: May react with strong oxidizing agents.
Other: No information available
______________________________________________________________________________________
11. TOXICOLOGICAL INFORMATION
Primary Eye Irritation: No information available
Primary Skin Irritation: No information available
Acute Dermal Toxicity: No information available
Subacute Dermal Toxicity: No information available
Dermal Sensitization: No information available
Inhalation Toxicity: No information available
Inhalation Sensitization: No information available
Oral Toxicity: The Oral LD50 for similar product is 20g/kg.
Mutagenicity: No information available
MATERIAL SAFETY DATA SHEET
PENNZOIL庐 SYNTHETIC BLEND MOTOR OIL - ALL GRADES
MSDS Number: 16034 Page 5 of 7
Carcinogenicity: The International Agency for Research on Cancer (IARC) has concluded that there is
inadequate data to evaluate the carcinogenicity to experimental animals of this class of product.
Also, IARC has determined this class of products belongs to Group 3 substance, "not classifiable
as to its carcinogenicity to humans", based on inadequate human and inadequate animal data.
Reproductive and Developmental Toxicity: No information available
Teratogenicity: No information available
Immunotoxicity: No information available
Neurotoxicity: No information available
Other: No information available
______________________________________________________________________________________
12. ECOLOGICAL INFORMATION
Aquatic Toxicity: No information available
Terrestrial Toxicity: No information available
Chemical Fate and Transport: No information available
Other: No information available
______________________________________________________________________________________
13. DISPOSAL INFORMATION
Regulatory Information: All disposals must comply with federal, state, and local regulations. The
material, if spilled or discarded, may be a regulated waste. Refer to state and local regulations.
Department of Transportation (DOT) regulations may apply for transporting this material when
spilled.
Waste Disposal Methods: Waste material may be landfilled or incinerated at an approved facility.
Materials should be recycled if possible.
Other: No information available
______________________________________________________________________________________
14. TRANSPORTATION INFORMATION
U.S. Department of Transportation (DOT)
Highway / Rail (Bulk): Not Regulated
Highway / Rail (Non-Bulk): Not Regulated
For US shipments, US DOT law requires the shipper to determine the proper shipping description
of the material that is being shipped. The shipping information and description contained in this
section may not be suitable for all shipments of this material, but may help the shipper determine
the proper shipping description for a particular shipment.
MATERIAL SAFETY DATA SHEET
PENNZOIL庐 SYNTHETIC BLEND MOTOR OIL - ALL GRADES
MSDS Number: 16034 Page 6 of 7
International Information
Vessel: IMDG Regulated: -- IMDG Not Regulated: X
Air: ICAO Regulated: -- ICAO Not Regulated: X
Other: No information available
______________________________________________________________________________________
15. Regulatory Information
Regulatory Lists Searched: The components listed in Section 2 of this MSDS were compared to
substances that appear on the following regulatory lists. Each list is numerically identified. See
Regulatory Search Results below.
Health & Safety: 10 - IARC carcinogen, 11 - NTP carcinogen, 12 - OSHA carcinogen, 15 - ACGIH TLV,
16 - OSHA PEL, 17 - NIOSH exposure limit, 20 - US DOT Appendix A, Hazardous substances, 22 - FDA
21 CFR Total food additives, 23 - NFPA 49 or 325
Environmental: 30 - CAA 1990 Hazardous air pollutants, 31 - CAA Ozone depletors, 33 - CAA HON
rule, 34 - CAA Toxic substance for accidental release prevention, 35 - CAA Volatile organic compounds
(VOC's) in SOCMI, 41 - CERCLA / SARA Section 302 extremely hazardous substances, 42 - CERCLA /
SARA Section 313 emissions reporting, 43 - CWA Hazardous substances, 44 - CWA Priority pollutants, 45
- CWA Toxic pollutants, 46 - EPA Proposed test rule for hazardous air pollutants, 47 - RCRA Basis for
listing - Appendix VII, 48 - RCRA waste, 49 - SDWA - (S)MCLs
International: 50 - Canada - WHMIS Classification of substance, 54 - Mexico - Drinking water -
ecological criteria, 55 - Mexico - Wastewater discharges, 56 - US -TSCA Section (12)(b) - export
notification
State Lists: 60 - CA - Proposition 65, 61 - FL - Substances, 62 - MI - Critical materials, 63 - MA - RTK,
64 - MA - Extraordinarily hazardous substances, 65 - MN - Hazardous substances, 66 - PA - RTK, 67 - NJ
- RTK, 68 - NJ - Environmental hazardous substances, 69 - NJ - Special hazardous substances
Inventories: 80 - Canada - Domestic substances , 81 - European - EINECS, 82 - Japan - ENCS, 83 - Korea
- Existing and evaluated chemical substances, 84 - US - TSCA , 85 - China Inventory
Regulatory Search Results:
No components appear on any of the regulatory lists searched.
U.S. TSCA Inventory: All components of this material are on the US TSCA Inventory.
SARA Section 313: Consumer products are not regulated under SARA, Title III, Section 313.
IARC: No information available
SARA 311 / 312 Categories
Acute: -- Chronic: -- Fire: -- Pressure: -- Reactive: --
Not Regulated: X
Canadian WHMIS Classification
Not a controlled substance under WHMIS
European Union Classification
Hazard Symbols:
No information available
Risk Phrases:
No information available
MATERIAL SAFETY DATA SHEET
PENNZOIL庐 SYNTHETIC BLEND MOTOR OIL - ALL GRADES
MSDS Number: 16034 Page 7 of 7
Safety Phrases:
No information available
Other: No information available
______________________________________________________________________________________
16. OTHER INFORMATION
Health and Environmental Label Language
Back Label:
CAUTION: Wash skin with soap and water after handling.
KEEP OUT OF REACH OF CHILDREN.
MSDS Revisions
Previous Version Date: 07/26/01
Previous Version Information
Section 1 - Product and Company Identification - revised synonyms.
Section 2 - Component Information - revised componets.
Other
No information available
Prepared By:
SOPUS Products
P.O. Box 4427
Houston, TX 77210-4427 USA
Disclaimer of Warranty: The information contained herein is based upon data and information available
to us, and reflects our best professional judgment. This product may be formulated in part with
components purchased from other companies. In many instances, especially when proprietary or
trade secret materials are used, SOPUS Products must rely upon the hazard evaluation of such
components submitted by that product鈥檚 manufacturer or importer. No warranty of
merchantability, fitness for any use, or any other warranty is expressed or implied regarding the
accuracy of such data or information, the results to be obtained from the use thereof, or that any
such use do not infringe any patent. Since the information contained herein may be applied under
conditions of use beyond our control and with which we may be unfamiliar, we do not assume
responsibility for the results of such application. This information is furnished upon the condition
that the person receiving it shall make his own determination of the suitability of the material for
his particular use.
|