EXTRACTION CLEANING
Product Needed
Tools Needed
P&G Pro Line
鈥? Wet Floor Sign Carpet Spot Remover,Traffic Lane /
Bonnet Cleaner & Extraction Cleaner
鈥? Carpet Extractor
鈥? Measuring Cup
鈥? Carpet Rake or Stiff Brush
FREQUENCY OF CLEANING: When carpet looks heavily soiled. Regular bonnet cleaning will extend time between extraction cleaning.
PREPARATION: Collect all tools, equipment and products required. Ensure all equipment is operational. Review MSDS, product labels
and caution statements. Choose appropriate safety equipment.
SPECIAL DIRECTIONS FOR THIS TASK: Pre-test extraction cleaner for colorfastness before use. Do not use if color is removed, faded or
otherwise changed. Extraction Cleaner / Sanitizer is recommended for use on washable synthetic fibers. Extraction Cleaner / Sanitizer is
not recommended for use on wool or stain resistant carpets. Clear furnishings from area. Protect furnishings that cannot be moved.
Replace furnishings when finished. Use furniture pads if furniture must be replaced before floor is dry. When finished, clean and return
equipment to storage area.
STEP 5
STEP 1
鈥? Move to next section, working towards
鈥? Pre-treat stains following the Spot, Stain, Gum
doorway and repeat Step 4 through Step 5.
Removal Procedure.
鈥? Remove grit and loose soil by following the
Vacuum Procedure.
鈥? For heavily soiled carpets, bonnet clean area STEP 6
鈥? Empty and rinse tank and.
following the Bonnet Cleaning Procedure or
鈥? Fill tank with hot water to rinse area.
the Bonnet Cleaning 鈥? Immersion Method
鈥? Moving in a constant steady motion, hold
Procedure.
feed valve open and pull extractor towards
you.
鈥? Release the feed valve before reaching end
STEP 2
of pass.
鈥? Post 鈥渨et floor鈥? sign in area to be cleaned.
鈥? With control valve closed, push extractor
NOTE: Pre-test extraction cleaner for
forward to pick up rinse water.
colorfastness before use. Do not use if
color is removed, faded or otherwise
NOTE: Avoid overwetting carpet.
changed.
STEP 7
鈥? Brush or rake carpet in one direction to set
STEP 3
鈥? Fill extraction tank to just below fill line. nap up.
鈥? Add 10 ounces extraction.
鈥? Add 1 ounce foam control. STEP 8
鈥? Slowly add water until solution level reaches 鈥? Apply Carpet / Upholstery Protectant
the fill line. following the Carpet/Upholstery Protection
NOTE: Proper dilution of extraction Procedure.
cleaner is 2 ounces per 1 gallon tank
capacity. Proper dilution of foam control NOTE: Carpet / Upholstery Protectant
agent is 1 ounce per 5 gallon tank may be applied while carpet is wet.
capacity.
STEP 9
鈥? Vacuum carpet when dry following the
STEP 4
鈥? Begin extracting at farthest point from door. Vacuum Procedure.
鈥? Moving in a constant steady motion, hold
feed value open and pull extractor towards NOTE: To speed dry carpet, buff with
you. clean dry bonnets, turning and changing
鈥? Release the feed valve before reaching end often. A fan may be used . Direct air
of pass. movement up across or out from room.
鈥? With control valve closed, push extractor
forward to pick-up moisture and soils.
NOTE: Avoid overwetting carpet.
.
漏 2003 Procter & Gamble
ALL RIGHTS RESERVED. UNAUTHORIZED REPRODUCTION PROHIBITED
|