PAGE 1 of 7
Material 24 Hour Emergency Phone Numbers:
Medical: 1-800-327-3874
1-513-558-5111
Safety Transportation:
1-800-535-5053
1-352-323-3500
Data
Sheet
NOTE: National Response Center emergency numbers to be used
only in the event of chemical emergencies involving a spill, leak,
fire, exposure or accident involving chemicals.
IMPORTANT: Provide this information to employees, customers, and users of this product. Read this MSDS before handling or
disposing of this product. This product is covered by the OSHA Hazard Communication Standard and this document has been
prepared in accordance with requirements of this standard. All abbreviated terms used in this MSDS are further described in Section
16.
Section 1 - Chemical Product / Company Information
This Material Safety Data Sheet is available in Canadian French and Hispanic American Spanish upon request.
Esta hoja de datos de la seguridad de los materiales est谩 disponible en franc茅s canadiense y en espa帽ol a su solicitud.
Los Datos de Serguridad del Producto pueden obtenerse en Espanol si lo riquiere.
Product Name: Weatherflex Sealant, All Colors Revision Date: 05/16/2006
Product UPC 7079800885 Supercedes: 06/04/2003
Number:
Product Use/Class: MS Polymer Caulk MSDS Number: 00010029002
Manufacturer: DAP Inc.
2400 Boston Street Suite 200
Baltimore, MD 21224-4723
888-327 -8477 (non-emergency matters)
Section 2 - Composition / Information On Ingredients
ACGIH
Chemical Name CASRN WT% ACGIH TWA ACGIH CEIL OSHA TWA OSHA STEL OSHA CEIL Skin
STEL
5 MGM3
Calcium Carbonate 471-34-1 30-60 10 MGM3 N.E. N.E. (respirable N.E. N.E. No
fraction)
Diisodecyl phthalate 68515-49 -1 10-30 N.E. N.E. N.E. N.E. N.E. N.E. No
5 MGM3
Calcium carbonate 1317 -65-3 10-30 10 MGM3 N.E. N.E. (respirable N.E. N.E. No
fraction)
Titanium dioxide 13463-67 -7 3-7 10 MGM3 N.E. N.E. 15 MGM3 N.E. N.E. No
Trimethoxyvinylsilane 2768 -02-7 0.1-1.0 N.E. N.E. N.E. N.E. N.E. N.E. No
Carbon black 1333 -86-4 0.1-1.0 3.5 MGM3 N.E. N.E. 3.5 MGM3 N.E. N.E. No
Methanol 67-56-1 <0.04 200 PPM 250 PPM N.E. 200 PPM N.E. N.E. Yes
Ethylenediamine 107-15-3 <0.02 10 PPM N.E. N.E. 10 PPM N.E. N.E. Yes
Exposure Notes:
Important: Listed Permissible Exposure Levels (PEL) are from the U.S. Dept. of Labor OSHA Final Rule Limits (CFR 29 1910.1000); these limits
may vary between states.
Note: An employee's skin exposure to substances having a "YES" in the "SKIN" column in the table above shall be prevented or reduced to the
extent necessary under the circumstances through the use of gloves, coveralls, goggles or other appropriate personal protective equipment,
engineering controls or work practices
PAGE 2 of 7
Section 3 - Hazards Identification
Emergency Overview: A colored paste with a slight odor. WARNING! May cause eye, skin, nose, throat and
respiratory tract irritation. Harmful if swallowed or absorbed through the skin.
Refer to other MSDS sections for other detailed information.
Effects Of Overexposure - Eye Contact: Causes eye irritation. Signs and symptoms may include: pain, tears,
swelling, redness and blurred vision.
Effects Of Overexposure - Skin Contact: Causes Moderate skin irritation. Harmful if absorbed through the skin.
May cause skin irritation. Prolonged or repeated skin contact can result in sensitization and dermatitis.
Effects Of Overexposure - Inhalation: Vapor harmful. During application and cure, this product releases
methanol, which may affect the brain or nervous system causing dizziness, headache or nausea. Vapor harmful.
Inhalation may cause irritation to the respiratory tract (nose, mouth, mucous membranes). May cause drowsiness.
Overexposure by inhalation may injure the liver. May cause blurred vision.
Effects Of Overexposure - Ingestion: Harmful if swallowed. Ingestion may cause gastrointestinal irritation,
nausea, vomiting and diarrhea.
Effects Of Overexposure - Chronic Hazards: Prolonged and repeated skin contact may cause irritation and
possibly dermatitis. Repeated or prolonged exposure may cause respiratory system damage.
Overexposure may cause kidney, cardiovascular, skin and liver damage.
Trimethoxyvinylsilane may cause heart muscle damage, anemia and lung, liver and kidney damage.
A mixture of diisodecyl phthalate and diisononyl phthalate has been tested in a two-generation toxicity study in
laboratory animals. No effects on reproductive parameters were seen. However, a small but statistically significant
increase in early offspring mortality was seen at high oral doses. The significance of this to humans is uncertain.
Primary Route(s) Of Entry: Skin Contact, Skin Absorption, Inhalation
Medical Conditions which May be Aggravated by Exposure: None known.
Section 4 - First Aid Measures
First Aid - Eye Contact: In case of contact, immediately flush eyes with large quantities of water for at least 15
minutes until irritation subsides. Get medical attention immediately.
First Aid - Skin Contact: Wash off immediately with soap and plenty of water for at least 15 minutes. Get
medical aid if symptoms persist. Remove and wash contaminated clothing.
First Aid - Inhalation: If inhaled, remove to fresh air. If breathing is difficult, leave the area to obtain fresh air. If
continued breathing difficulty is experienced, get medical attention immediately.
First Aid - Ingestion: If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately. If
ingested, drink 2 glasses of water. Immediately see a physician. Never give anything by mouth to an unconcious
person.
Note to Physician: None.
COMMENTS: Call Medical Emergency at 1-800-327-3874 if any irritation or complication arises from any of the
above routes of entry.
PAGE 3 of 7
Section 5 - Fire Fighting Measures
Flash Point, F: Greater than 200 Lower Explosive Limit, %: Not Established
Method: ( Seta Closed Cup) Upper Explosive Limit, %: Not Established
Extinguishing Media: Carbon Dioxide, Dry Chemical, Foam
Unusual Fire And Explosion Hazards: No special protective measures against fire required.
Special Firefighting Procedures: Wear self-contained breathing apparatus pressure-demand (NIOSH approved
or equivalent) and full protective gear. Use water spray to cool exposed surfaces.
Section 6 - Accidental Release Measures
Steps To Be Taken If Material Is Released Or Spilled: Wear proper protective equipment as specified in
Section 8. Use absorbent material or scrape up dried material and place in container.
Section 7 - Handling And Storage
Handling: KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Use only with adequate
ventilation. Avoid breathing vapor and contact with eyes, skin and clothing. Wash thoroughly after handling. Open
all windows and doors or use other means to ensure cross-ventilation and fresh air entry during application and
drying. Odor is not an adequate warning for hazardous conditions. Remove contact lenses before using. Do not
handle contact lenses until all sealant has been cleaned from fingertips, nails and cuticles. Residual sealant may
transfer to contact lenses and cause severe eye irritation.
Storage: Close container after each use. Store away from caustics and oxidizers. Store containers away from
excessive heat and freezing. Do not store at temperatures above 120 degrees F.
Section 8 - Exposure Controls / Personal Protection
Precautionary Measures: Please refer to other sections and subsections of this MSDS.
Engineering Controls: Good general ventilation should be sufficient to control airborne levels. Ensure adequate
ventilation, especially in confined areas. Local ventilation of emission sources may be necessary to maintain
ambient concentrations below recommended exposure limits.
Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment. A NIOSH-
approved air purifying respirator with an organic vapor cartridge or canister may be necessary under certain
circumstances where airborne concentrations are expected to exceed exposure limits. A respiratory protection
program that meets the OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace
conditions warrant a respirator's use.
Skin Protection: Rubber gloves. Natural rubber, butyl rubber and polyvinyl chloride gloves are not suitable
protection against the phthalates contained within this product; neoprene is recommended.
Eye Protection: Goggles or safety glasses with side shields.
Other protective equipment: Not required under normal use.
Hygienic Practices: Remove and wash contaminated clothing before re-use. Wash hands before breaks and at
the end of workday.
PAGE 4 of 7
Section 9 - Physical And Chemical Properties
Not Established Not Established
Boiling Range: Vapor Density:
Odor: Slight Odor Threshold: Not Established
Appearance: Colored Evaporation Rate: Slower Than n-Butyl Acetate
Solubility in H2O: Not Established Specific Gravity: 1.492
Freeze Point: Not Established pH: Not Applicable
Vapor Pressure: Not Established Viscosity: Not Established
Physical State: Paste
When reported, vapor pressure of this product has been calculated theoretically based on its constituent makeup and has not been determined
experimentally.
(See section 16 for abbreviation legend)
Section 10 - Stability And Reactivity
Conditions To Avoid: Excessive heat and freezing.
Incompatibility: Incompatible with strong bases and oxidizing agents.
Hazardous Decomposition Products: Normal decomposition products, i.e., COx, NOx.
Hazardous Polymerization: Hazardous polymerization will not occur under normal conditions.
Stability: Stable under recommended storage conditions.
Section 11 - Toxicological Information
Product LD50: Not Established Product LC50: Not Established
CASRN Chemical Name LD50 LC50 WT%
471-34-1 Calcium Carbonate Rat:6450 mg/kg ------------- 30-60
1333-86-4 Carbon black Rat:>15400 mg/kg ------------- 0.1-1.0
67-56-1 Methanol Rat:5628 mg/kg Rat:64000 ppm/4H <0.04
107-15-3 Ethylenediamine Rat:1200 mg/kg MICE: 300 mg/m3 <0.02
Carcinogenicity:
CAS No. Chemical Name ACGIH OSHA IARC NTP WT%
Classification not
13463-67 -7 Titanium dioxide Not Listed. Not Listed. possible from current Not Listed. 3-7
data.
1333-86-4 Carbon black Not Listed. Not Listed. Possible carcinogen. Not Listed. 0.1-1.0
Significant Data with Possible Relevance to Humans: None
Section 12 - Ecological Information
Ecological Information: Ecological injuries are not known or expected under normal use.
Section 13 - Disposal Information
Disposal Information: Dispose of material in accordance with all federal, state and local regulations. State and
Local regulations/restrictions are complex and may differ from Federal regulations. Responsibility for proper waste
PAGE 5 of 7
disposal is with the owner of the waste.
EPA Waste Code if Discarded (40 CFR Section 261): none
Section 14 - Transportation Information
Not Regulated N.A.
DOT Proper Shipping Packing Group:
Name:
DOT Technical Name: N.A. Hazard Subclass: N.A.
DOT Hazard Class: N.A. DOT UN/NA Number: None
Note: The shipping information provided is applicable for domestic ground transport only. Different categorization
may apply if shipped via other modes of transportation and/or to non-domestic destinations.
Section 15 - Regulatory Information
CERCLA - SARA Hazard Category:
This product has been reviewed according to the EPA 'Hazard Categories' promulgated under Sections 311 and
312 of the Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under
applicable definitions, to meet the following categories:
Immediate Health Hazard, Chronic Health Hazard
SARA Section 313:
This product contains the following substances subject to the reporting requirements of Section 313 of Title III of
the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372:
None
Toxic Substances Control Act:
All ingredients in this product are either on TSCA inventory list, or otherwise exempt.
This product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if
exported from the United States:
None
U.S. State Regulations
New Jersey Right-to-Know:
The following materials are non-hazardous, but are among the top five components in this product:
Chemical Name CAS Number WT%
Proprietary polyether Proprietary 10-30
Pennsylvania Right-to-Know:
PAGE 6 of 7
The following non-hazardous ingredients are present in the product at greater than 3%:
Chemical Name CAS Number WT%
Proprietary polyether Proprietary 10-30
California Proposition 65:
Warning: The following ingredients present in the product are known to the State of California to cause cancer:
Chemical Name CAS Number Definition Date Listed WT%
Listed: February 21,
Carbon black 1333 -86-4 Carcinogenic. 0.1-1.0
2003
Warning: The following ingredients present in the product are known to the State of California to cause birth
defects or other reproductive harm:
None.
Section 16 - Other Information
HMIS Ratings:
Health: 1 Flammability: 1 Reactivity: 0 Personal Protection: X
VOLATILE ORGANIC COMPOUNDS, GR/LTR: 0.5 LB/GAL: 0.0 WT%: 0.0
REASON FOR REVISION: Periodic Update
Legend: N.A. 鈥? Not Applicable ACGIH 鈥? American Conference of Governmental Industrial Hygienists
N.E. 鈥? Not Established SARA 鈥? Superfund Amendments and Reauthorization Act of 1986
N.D. 鈥? Not Determined NJRTK 鈥? New Jersey Right-to-Know Law
VOC 鈥? Volatile Organic Compound OSHA 鈥? Occupational Safety and Health Administration
PEL 鈥? Permissible Exposure Limit HMIS 鈥? Hazardous Materials Identification System
TLV 鈥? Threshold Limit Value NTP 鈥? National Toxicology Program
STEL 鈥? Short Term Exposure Limit CEIL 鈥? Ceiling Exposure Limit
LD50 鈥? Lethal Dose 50 LC50 鈥? Lethal Concentration 50
F 鈥? Degree Fahrenheit C 鈥? Degree Celsius
MSDS 鈥? Material Safety Data Sheet CASRN 鈥? The Chemical Abstracts Service Registry Number
DAP believes the data and statements contained herein are accurate as of the date hereof. They are offered in good faith as
typical values and not as a product specification. NO WARRANTY OF MERCHANTABILITY, WARRANTY OF
FITNESS FOR ANY PARTICULAR PURPOSE OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS
MADE WITH REGARD TO THE INFORMATION HEREIN PROVIDED OR THE PRODUCT TO WHICH THE
INFORMATION REFERS. Since this document is intended only as a guide to the appropriate use and precautionary
handling of the referenced product by a properly trained person, it is therefore the responsibility of the user to (i) review the
recommendations with due consideration for the specific context of the intended use and (ii) determine if they are
appropriate.
PAGE 7 of 7
|