Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

9046-10-0

File Name: resins_com---ra197.asp
Material Safety Data Sheet


EPIKURE鈩? 3230 Curing Agent
Version 2.1 Print Date 07/06/2007
Revision Date 06/03/2007


1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

Product information

EPIKURE鈩? 3230 Curing Agent
Trade name :

Product code : RA197

MSDS Number : 2057

Product Type : Curing agent.

Manufacturer, importer, : Hexion Specialty Chemicals, Inc.
supplier P. O. Box 4500
Houston TX 77210

Contact person : hsebox@hexion.com

Telephone : General Information:
(832) 486-6700

Emergency telephone:
CHEMTREC US Domestic (800) 424-9300
CHEMTREC International (703) 527-3887


SECTION 2. HAZARDS IDENTIFICATION


Emergency Overview

Human health hazards : Corrosive to the eyes. Corrosive to the skin. Vapors/mists may
be corrosive to upper respiratory tract. Corrosive and may
cause severe and permanent damage to mouth, throat and
stomach. May be toxic if absorbed through skin. May cause
skin sensitization.

Safety hazards : Material will not burn unless preheated.



SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS


Chemical Name CAS-No. Weight %

Alpha-(2-Aminomethylethyl)-omega-(2-aminomethyleth 9046-10-0 100 %
oxy)-poly(oxy(methyl-1,2-ethanediyl))


1/9
Material Safety Data Sheet


EPIKURE鈩? 3230 Curing Agent
Version 2.1 Print Date 07/06/2007
Revision Date 06/03/2007



SECTION 4. FIRST AID MEASURES

Inhalation : Remove victim to fresh air and provide oxygen if breathing is
difficult. Give artificial respiration if not breathing. Get medical
attention.

Skin contact : Immediately remove contaminated clothing or shoes, wipe
excess from skin and flush with plenty of water for at least 15
minutes. Use soap if available or follow by washing with soap
and water. Do not reuse clothing until thoroughly cleaned. Get
medical attention.

Eye contact : Immediately flush eyes with plenty of water for 15 minutes while
holding eyelids open. Rinse continuously with water while on
way to get medical attention

Ingestion : Do not induce vomiting. Give one glass of water unless victim is
drowsy, convulsing, or unconscious. Seek medical attention
immediately.

Notes to physician

Symptoms : Irritation as noted above. Lung damage (scarring, bronchitis,
emphysema) may be evidenced by shortness of breath,
especially on exertion, and may be accompanied by chronic
cough. Skin sensitization (allergy) may be evidenced by rashes,
especially hives.



SECTION 5. FIRE-FIGHTING MEASURES

Suitable extinguishing : Use water fog, "alcohol foam", dry chemical or carbon dioxide.
media

Do not use water in a jet. Product will float. Water or fog may
cause frothing which can be violent, especially if sprayed into
containers of hot or burning liquid.

Specific hazards during fire : Material will not burn unless preheated. Delayed lung damage
fighting (pulmonary edema) can be experienced after exposure to
combustion products, sometimes hours after the exposure.
Nitrogen oxides and other potentially hazardous
nitrogen-containing compounds may be released upon
combustion.

Cool fire exposed containers with water.


2/9
Material Safety Data Sheet


EPIKURE鈩? 3230 Curing Agent
Version 2.1 Print Date 07/06/2007
Revision Date 06/03/2007

Special protective : Do not enter confined fire space without full bunker gear (helmet
equipment for fire-fighters with face shield, bunker coats, gloves and rubber boots).
including a positive pressure NIOSH approved self-contained
breathing apparatus.



SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions : Corrosive.
Prevent all bodily contact with spilled material.
Shut off leaks, if possible without personal risk.
Remove ignition sources.

Environmental precautions : Dike and contain.
Contain run-off and dispose of properly.
Prevent from entering into drains, ditches or rivers.

Clean-up methods - small : Take up with an absorbent material and place in non-leaking
spillage containers.
Seal tightly for proper disposal.

Clean-up methods - large : Remove with vacuum trucks or pump to storage/salvage
spillage vessels.
Soak up residue with an absorbent such as clay, sand or other
suitable material; place in non-leaking containers for proper
disposal.
Flush area with water to remove trace residue.


Additional advice : Notify authorities if any exposures to the general public or
environment occurs or is likely to occur.
See Section 13 for information on disposal.



SECTION 7. HANDLING AND STORAGE

Handling
Advice on safe handling : Do not get in eyes, on skin or on clothing. Do not breathe
vapour, mists Do not pressurize drum containers to empty
them. Heating this curing agent above 300 Deg. F in the
presence of air may cause slow oxidative decomposition; above
500 Deg. F, polymerization may occur. Some epoxy resins can
produce exothermic reactions which in large masses can cause
runaway polymerization and charring of the reactants. Fumes
and vapors from these thermal and chemical decompositions
vary widely in composition and toxicity. Do not breathe fumes.
Use a NIOSH-approved respirator as required to prevent
overexposure. In accord with 29 CFR.1910.134, use either an
3/9
Material Safety Data Sheet


EPIKURE鈩? 3230 Curing Agent
Version 2.1 Print Date 07/06/2007
Revision Date 06/03/2007

atmosphere-supplying respirator or an air-purifying respirator for
organic vapors. DANGER. Corrosive to skin and eyes. May be
corrosive to respiratory tract. Corrosive to the digestive tract.
May be toxic and harmful if absorbed through skin. May cause
skin sensitization. Containers, even those that have been
emptied, can contain hazardous product residues. Wash with
soap and water before eating, drinking, smoking, applying
cosmetics, or using toilet facilities. Launder contaminated
clothing before reuse. Contaminated leather articles, including
shoes, cannot be decontaminated and should be destroyed to
prevent reuse.

Storage
Requirements for storage : Store in a cool, dry place with adequate ventilation. Keep away
areas and containers from open flames and high temperatures.



SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Protective measures : Wear appropriate respirator and full-body protective clothing.

Engineering measures : Use ventilation as required to control vapor concentrations.
Eye wash fountains and safety showers should be available for
emergency use.

Eye protection : Do not get in eyes.
Wear chemical goggles if there is potential contact with eyes.

Skin and body protection : Do not get on skin, on clothing.
Wear chemical-resistant protective clothing such as gloves,
outer clothing or apron, overshoes and a face-shield suitable to
potential exposure.

Respiratory protection : Do not breathe vapors or mists.
Use a NIOSH-approved respirator as required to prevent
overexposure.
In accord with 29 CFR 1910.134,
Use either a full-face, atmosphere-supplying respirator or
air-purifying respirator for organic vapors.
Avoid breathing vapors which may be produced under some
conditions such as heating or applications of uncured material in
large surface areas (e.g., flooring and painting).
Avoid breathing aerosols and mists which may be formed by
various methods of application.


Exposure Guidelines


4/9
Material Safety Data Sheet


EPIKURE鈩? 3230 Curing Agent
Version 2.1 Print Date 07/06/2007
Revision Date 06/03/2007


Components with Regulation Exposure time Value Remarks
workplace control
parameters
Alpha-(2-Aminomethylethy ACGIH None established.
l)-omega-(2-aminomethyle
thoxy)-poly(oxy(methyl-1,2
-ethanediyl))


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Form : Liquid

Colour : Colourless

Odour : Ammonia

Flash point : 124 掳C (255 掳F) (Pensky-Martens)

Vapour pressure : 1.33 mbar at 10 掳C (50 掳F)

Relative density : 0.95

Solubility in water : Slightly soluble.

Other physico-chemical : The above properties are typical values only and do not
properties constitute a specification (refer to supplier for supply
specification).



SECTION 10. STABILITY AND REACTIVITY

Conditions to avoid : Heat, flames and sparks.

Materials to avoid : Avoid contact with strong oxidizing agents.

Hazardous decomposition : Nitrogen oxides, carbon monoxide and unidentified organic
products compounds may be formed during combustion.


Hazardous reactions : Stable.

Hazardous polymerization will not occur.



SECTION 11. TOXICOLOGICAL INFORMATION

Acute oral toxicity : Low toxicity, LD50 > 2000 mg/kg.


5/9
Material Safety Data Sheet


EPIKURE鈩? 3230 Curing Agent
Version 2.1 Print Date 07/06/2007
Revision Date 06/03/2007

Acute dermal toxicity : Low toxicity, LD50 > 2000 mg/kg.

Chronic Health Hazard

Components Concentration Regulation Value Remarks
Alpha-(2-Aminom 100 % US. IARC Monographs on This
ethylethyl)-omega Occupational Exposures to component
-(2-aminomethylet Chemical Agents has not been
hoxy)-poly(oxy(me classified by
thyl-1,2-ethanediyl the
)) International
Agency for
Research on
Cancer
(IARC).


Potential Health Effects

Inhalation : Vapors/mists may be corrosive to upper respiratory tract.
Repeated or prolonged exposure can result in lung damage.

Skin : Corrosive to the skin.
May be toxic if absorbed through skin.
May cause skin sensitization.

Eyes : Corrosive to the eyes and may cause severe damage including
blindness.
Vapors may be irritating.

Ingestion : Not expected to be a relevant route of exposure, however,
corrosive and may cause severe and permanent damage to
mouth, throat, and stomach.

Aggravated Medical : Preexisting eye,skin and respiratory disorders may be
Condition aggravated by exposure to this product.



SECTION 12. ECOLOGICAL INFORMATION

Elimination information (persistence and degradability)
Biodegradability : This section will be updated as ecological reviews are
completed.

Ecotoxicity effects
Toxicity to fish : This section will be updated as ecological reviews are
completed.

6/9
Material Safety Data Sheet


EPIKURE鈩? 3230 Curing Agent
Version 2.1 Print Date 07/06/2007
Revision Date 06/03/2007




SECTION 13. DISPOSAL CONSIDERATIONS

Product disposal : If this material becomes a waste, it would not be a hazardous
waste by RCRA criteria (40 CFR 261). Place in an appropriate
disposal facility in compliance with local and federal regulations.



SECTION 14. TRANSPORT INFORMATION

: UN/NA-No 2735
DOT
Class 8
Packing group III
ERG No. 153
Proper shipping name POLYAMINES, LIQUID, CORROSIVE, N.O.S.
contains POLYALKYLAMINES

: UN-Number 2735
IMDG
Class 8
Packaging group III
EmS F-A S-B
Description of the goods POLYAMINES, LIQUID, CORROSIVE, N.O.S.
contains POLYALKYLAMINES

: UN-Number 2735
IATA
Cargo
Class 8
Packaging group III
ERG No. 153
Description of the goods POLYAMINES, LIQUID, CORROSIVE, N.O.S.
contains POLYALKYLAMINES




SECTION 15. REGULATORY INFORMATION

The regulatory information is not intended to be comprehensive. Other regulations may apply to this material.
Notification status
EINECS : Polymer exempt.

AICS : y

TSCA : y


7/9
Material Safety Data Sheet


EPIKURE鈩? 3230 Curing Agent
Version 2.1 Print Date 07/06/2007
Revision Date 06/03/2007

DSL : y

IECSC : y

KECI (KR) : y

MITI : y

PICCS (PH) : y

US. EPA CERCLA Hazardous Substances (40 CFR 302)

Alpha-(2-Aminomethylethyl)-omega-( No RQ
2-aminomethylethoxy)-poly(oxy(meth
yl-1,2-ethanediyl))

SARA 311/312 Hazards

Acute Health Hazard
Chronic Health Hazard

US. EPA Emergency Planning and Community Right-To-Know Act (EPCRA) SARA Title III
Section 313 Toxic Chemicals(40 CFR 372. 65) - Supplier Notification Required

Alpha-(2-Aminomethylethyl)-omega-( No De minimis Concentration
2-aminomethylethoxy)-poly(oxy(meth
yl-1,2-ethanediyl))

US. EPA Emergency Planning and Community Right-To-Know Act (EPCRA) SARA Title III
Section 302 Extremely Hazardous Substance (40 CFR 355, Appendix A)

Alpha-(2-Aminomethylethyl)-omega-( Threshold Planning Quantity: No TPQ
2-aminomethylethoxy)-poly(oxy(meth
yl-1,2-ethanediyl))

Alpha-(2-Aminomethylethyl)-omega-( Reportable quantity: No RQ
2-aminomethylethoxy)-poly(oxy(meth
yl-1,2-ethanediyl))

New Jersey Right-To-Know Chemical List

Alpha-(2-Aminomethylethyl)-omega-( Not Listed
2-aminomethylethoxy)-poly(oxy(meth
yl-1,2-ethanediyl))


Pennsylvania Right-To-Know Chemical List



8/9
Material Safety Data Sheet


EPIKURE鈩? 3230 Curing Agent
Version 2.1 Print Date 07/06/2007
Revision Date 06/03/2007

Alpha-(2-Aminomethylethyl)-omega-( Not Listed
2-aminomethylethoxy)-poly(oxy(meth
yl-1,2-ethanediyl))


Massachusetts Right-To-Know Chemical List

Alpha-(2-Aminomethylethyl)-omega-( Not Listed
2-aminomethylethoxy)-poly(oxy(meth
yl-1,2-ethanediyl))


HMIS Rating : Health: 3
Fire: 1
Reactivity: 0



SECTION 16. OTHER INFORMATION


Reference : Prepared in accordance with 29 CFR 1910.1200.


The information provided herein was believed by Hexion Specialty Chemicals ("Hexion") to be accurate at the
time of preparation or prepared from sources believed to be reliable, but it is the responsibility of the user to
investigate and understand other pertinent sources of information, to comply with all laws and procedures
applicable to the safe handling and use of the product and to determine the suitability of the product for its
intended use. All products supplied by Hexion are subject to Hexion's terms and conditions of sale. HEXION
MAKES NO WARRANTY, EXPRESS OR IMPLIED, CONCERNING THE PRODUCT OR THE
MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE OR CONCERNING THE ACCURACY OF
ANY INFORMATION PROVIDED BY HEXION, except that the product shall conform to Hexion's specifications.
Nothing contained herein constitutes an offer for the sale of any product.
庐 鈩?
and Licensed trademarks of Hexion Specialty Chemicals, Inc.

A vertical bar ( | ) in the left margin indicates an amendment from the previous version.




9/9

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
resins_com---l1982.asp N/A
resins_com---ra050.asp 140-31-8 112-24-3
resins_com---ra123.asp 28064-14-4 123209-73-4
resins_com---ra146.asp N/A
resins_com---ra178.asp 84852-15-3
resins_com---ra197.asp 9046-10-0
resins_com---rp4011.asp N/A
resins_com---rp4036.asp N/A
resins_com---rp4075.asp N/A
resins_com---sc0127.asp N/A
resins_com---sc1183.asp N/A
resins_com---sc1358.asp N/A
resins_com---sc1516.asp N/A
resins_com---sc1971.asp N/A
resins_com---sc2122.asp N/A
resins_com---sc2268.asp N/A
resins_com---sc2365.asp N/A
resins_com---sc2429.asp N/A
resins_com---sc2496.asp N/A
resins_com---sc3037.asp N/A
resins_com---u8926.asp 80-05-7
resins_com---v9113.asp 26896-20-8
safety_vanderbilt_edu---accent_plus_1_lotion_11_02.asp N/A
safety_vanderbilt_edu---accent_plus_amino_lotion_7_05.asp 57-11-4 142-91-6
safety_vanderbilt_edu---accent_plus_skin_cleanser_11_02.asp N/A
safety_vanderbilt_edu---aceticacid__glacial.asp 64-19-7
safety_vanderbilt_edu---airx_90_03.asp 68391-01-5 68956-79-6
safety_vanderbilt_edu---alcohol_prep_pads_7_02.asp 67-63-0
safety_vanderbilt_edu---ammonia_inhalants_7_00.asp 67-63-0 1336-21-6
safety_vanderbilt_edu---asepti-wipe.asp N/A
safety_vanderbilt_edu---asepti_steryl_3_05.asp 111-30-8
safety_vanderbilt_edu---asepti_zyme_3_05.asp 57-55-6 84133-50-6 9014-01-1
safety_vanderbilt_edu---betadineaerosolspray.asp 25655-41-8
safety_vanderbilt_edu---betadine_pvp_solution_10_03.asp 25655-41-8 56-81-5
safety_vanderbilt_edu---betadine_solution_7_05.asp 25655-41-8 56-81-5 68131-39-5
safety_vanderbilt_edu---bravo_floor_stripper_5_05.asp 2005-05-1 1310-73-2 141-43-5
safety_vanderbilt_edu---buffered_neutral_formalin10percent_10_05.asp 50-00-0 67-56-1 7558-79-4 10049-21-5 7732-18-5
safety_vanderbilt_edu---carbondioxide_cryogenicliquid_06_04.asp 124-38-9
safety_vanderbilt_edu---carbondioxide_gas_06_04.asp 124-38-9
safety_vanderbilt_edu---cavicide_01_05.asp 67-63-0 111-76-2
safety_vanderbilt_edu---chlorhexidinegluconate2.asp 18472-51-0 55-56-1
safety_vanderbilt_edu---chlorohexidine_gluconate_4_11_99.asp 56-55-1
safety_vanderbilt_edu---cidarinsegel.asp 64-17-5
safety_vanderbilt_edu---cidexplus_activator_12_03.asp 127-08-2 68131-72-6
safety_vanderbilt_edu---clorox_ultra_germicidal_bleach0307.asp 7681-52-9 1310-73-2
safety_vanderbilt_edu---consume_02_03.asp N/A
safety_vanderbilt_edu---detachol_10_02.asp 64742-48-9
safety_vanderbilt_edu---dispatch_wipes_11_04.asp 7681-52-9
safety_vanderbilt_edu---divoblend3a.asp 1310-73-2 5064-31-3
safety_vanderbilt_edu---endure250_08_05.asp 57-55-6 61789-30-8 56-81-5 3380-34-5 10043-35-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC