INTERNATIONAL CHEM-CRETE CORPORATION
CORPORATE OFFICE
800 SECURITY ROW
RICHARDSON, TX 75081
USA
www.chem-crete.com
MATERIAL SAFETY DATA SHEET (MSDS)
Date Revised: March. 2006
PART A
I. IDENTIFICATION
PRODUCT NAME: Chem-Sewer - Two Component Hydrophobic Epoxy Gel System Part A
UN No 3082
Chemical
Epoxy Resin, fillers, and pigment
Family
9
Class
Proper Nil
Subssidiary Risk
Shipping Epoxy Resin
Name NA
Hazchem Code
Adhesive
Use NA
Poison Schedule
III
Packing Group
Emergency Contacts: CHEMTREC (800) 424 9300 OR +1 (703)527 3887
II. MANUFACTURERES IDENTITY
International Chem-Crete Inc., 800 Security Row, Richardson, TX 75081, U.S.A
Tel:+19726716477 Fax:+19722380307, email: contactus@chem-crete.com
III. DESCRIPTION/PROPERTIES
PRODUCT IDENTITY
White 0%
Appearance Percent
Volatiles
Slight/Faint 1.68
Odor Specific gravity
> 500 (260 ) Negligible
Boiling Point, 藲F (藲C) Solubility
in Water
Not applicable > 480 (249) (Pensky-Martens)
Melting Point, 藲F (藲C) Flash Point, 藲F (藲C)
0.03 mbar
Vapor
Pressure
Not known Not known
Flammability Auto ignition
Limits Temperature, 藲F (藲C)
COMPONENTS AND EXPOSURE LIMITS
Percentage
Chemical Name CAS # OSHA OSHA ACGIH ACGIH
TWA STEL TWA STEL
(ppm) (ppm) (ppm) (ppm)
bisphenol-A-
35-70%
(epichlorhydrin); epoxy 25068-38-6
resin
INGREDIENT
To 100% Trade Secret
DETERMINED TO BE
NON HAZARDOUS
INTERNATIONAL CHEM-CRETE CORPORATION
CORPORATE OFFICE
800 SECURITY ROW
RICHARDSON, TX 75081
USA
www.chem-crete.com
OSHA Hazard Communication Standard 29 CFR 1910.1200 allows the MSDS information as to other
non-hazardous components top be utilized if they are considered proprietary, therefore, identities of
proprietary ingredients in this product are not listed here.
STABILITY AND REACTIVITY
Stability Stable
Incompatibility & conditions to avoid None
Can react vigorously with strong oxidizing agents, strong
lewisor mineral acid, and strong mineral and organic bases.
Avoid contact with water or liquids.
Do not allow molten product to contact water or other
liquids.
Materials to avoid This can cause violent eruptions, splatter hot material, or
ignite flammable material.
Reaction with some curing agents may produce
considerable heat and possible violent decomposition.
Decomposition and by products None
Hazardous Polymerization Will not occur
Conditions to avoid Avoid high temperatures.
IV. REGULATORY INFORMATION
IRRITANT
R Phases
R36 Irritating to eyes
R37 Irritating to respiratory
R38 Irritating to skin
R43 May cause sensitization by skin contact.
S phases
S2 Keep out of the reach of children.
S24 Avoid contact with skin
S26 In case of contact with eyes, rinse immediately with plenty of water and seek a medical attention.
V. HEALTH HAZARD INFORMATION
HEALTH EFFECTS
Swallowed
Not likely to be a relevant route of exposure
INTERNATIONAL CHEM-CRETE CORPORATION
CORPORATE OFFICE
800 SECURITY ROW
RICHARDSON, TX 75081
USA
www.chem-crete.com
Eye
May be mildly irritating to the eyes. Contact with hot material can cause thermal burns which may result in permanent damage or
blindness.
Skin
May be mildly irritating to the skin. Contact with hot material can cause thermal burns which may result in permanent damage.
May cause skin sensitization.
Inhaled
Not expected to be a relevant route of exposure, however, under conditions where exposure to vapors or mists is possible, could
cause respiratory tract irritation.
FIRST AID
Swallowed
If swallowed do NOT induce vomiting. Give two glasses of water. Contact a doctor.
Eye
Irrigate with very generous quantities of water for 30 minutes. Consult a doctor.
Skin
Flush with soap and water
Inhaled
Remove from exposure.
EXPOSURE CONTROL
Technical Protective Measures
Wear protective clothing specified for normal operations.
Respiratory Protection
No respiratory protection is usually required under normal conditions of use.
Hand Protection
Wear Suitable Gloves
Eye Protection
Avoid contact with eyes. Wear chemical goggles if there is potential contact with eyes. Safety spectacles
Skin Protection
Wear chemical-resistant gloves and other clothing as required to minimize contact.
TOXICOLOGICAL INFORMATION
Acute oral toxicity : LD50 - Low toxicity, LD50 > 2000 mg/kg.
Acute dermal toxicity : LD50 - Low toxicity, LD50 > 2000 mg/kg.
Swallowed
Not likely to be a relevant route of exposure.
Eye
May be mildly irritating to the eyes. Contact with hot material can cause thermal burns which may
result in permanent damage or blindness
Skin
May be mildly irritating to the skin. Contact with hot material can cause thermal burns which may result in permanent
damage. May cause skin sensitization.
Inhaled
Not expected to be a relevant route of exposure, however,
under conditions where exposure to vapors or mists is
possible, could cause respiratory tract irritation.
ECOLOGICAL INFORMATION
This section will be updated as ecological reviews are completed.
INTERNATIONAL CHEM-CRETE CORPORATION
CORPORATE OFFICE
800 SECURITY ROW
RICHARDSON, TX 75081
USA
www.chem-crete.com
VI. ACCIDENT RELEASE MEASURES
Personal precautions : May burn although not readily ignitable. Use cautious judgment when cleaning
up large spills. Shut off leaks, if possible without personal risk.
Environmental precautions Dike and contain. Contain run-off and dispose of properly.
: Remove contaminated soil to remove contaminated trace residues. Prevent
from entering into drains, ditches or rivers.
Clean-up methods - small :
spillage
Soak up with an absorbent such as clay, sand or other suitable material. Place
in non-leaking container. Seal tightly for proper disposal.
Clean-up methods -large : Remove with vacuum trucks or pump to storage/salvage vessels. Soak up
spillage residue with an absorbent such as clay, sand or other suitable material; place in
non-leaking containers for proper disposal. Flush area with water to remove
trace residue.
Additional advice :
Notify authorities if any exposures to the general public or environment occurs
or is likely to occur. See Section 13 for information on disposal.
VII. PRECAUTION FOR USE
VENTILATION
Observe EPA standards.
PERSONAL PROTECTION
Gloves, goggles, and boots.
FLAMMABILITY
Product is not a flammable liquid.
VIII. SAFE HANDLING INFORMATION
Handling
Advice on safe handling : Avoid prolonged or repeated contact with skin, eyes and clothing Avoid contact
with skin, eyes and clothing Wash thoroughly after handling. WARNING. May
cause skin and eye irritation. May cause skin sensitization. This resin may be
handled, shipped and stored at elevated temperature in bulk. The recommended
pumping temperature is 180 Deg. F. Wash with soap and water before eating,
drinking, smoking, applying cosmetics, or using toilet facilities. Launder
contaminated clothing before reuse. Contaminated leather articles, including
shoes, cannot be decontaminated and should be destroyed to prevent reuse. To
prevent thermal burns avoid contact with hot product.
INTERNATIONAL CHEM-CRETE CORPORATION
CORPORATE OFFICE
800 SECURITY ROW
RICHARDSON, TX 75081
USA
www.chem-crete.com
Storage
Requirements for storage : Store in a cool, dry place with adequate ventilation. Keep areas and containers
closed when not in use. Keep away from open flames and high temperatures.
INTERNATIONAL CHEM-CRETE CORPORATION
CORPORATE OFFICE
800 SECURITY ROW
RICHARDSON, TX 75081
USA
www.chem-crete.com
MATERIAL SAFETY DATA SHEET (MSDS)
Date Revised: March. 2006
PART B
I. IDENTIFICATION
PRODUCT NAME: Chem-Sewer - Two Component Hydrophobic Epoxy Gel System Part B
2815
UN No
Chemical
Amine Blends, fillers, and pigment
Family
8
Class
Proper Nil
Subssidiary Risk
Shipping Amine Blends
Name NA
Hazchem Code
Coating for concrete
Use NA
Poison Schedule
III
Packing Group
Emergency Contacts: CHEMTREC (800) 424 9300 OR +1 (703)527 3887
II. MANUFACTURERES IDENTITY
International Chem-Crete Inc., 800 Security Row, Richardson, TX 75081, U.S.A
Tel:+19726716477 Fax:+19722380307, email: contactus@chem-crete.com
III. DESCRIPTION/PROPERTIES
PRODUCT IDENTITY
Black 0%
Appearance Percent
Volatiles
Aminic 1.52
Odor Specific gravity
> 405 (207 ) Negligible
Boiling Point, 藲F (藲C) Solubility
in Water
>199 ( 93)
Not applicable
Melting Point, 藲F (藲C) Flash Point, 藲F (藲C)
< 13.3 Pa
Vapor
Pressure
Not known Not known
Flammability Auto ignition
Limits Temperature, 藲F (藲C)
COMPONENTS AND EXPOSURE LIMITS
Percent
Chemical Name CAS # OSHA OSHA ACGIH ACGIH
age TWA STEL TWA STEL
(ppm) (ppm) (ppm) (ppm)
35-70%
diethylenetriamine 111-40-0 1
Aminoethylpiperazine
140-31-8
20-40%
INTERNATIONAL CHEM-CRETE CORPORATION
CORPORATE OFFICE
800 SECURITY ROW
RICHARDSON, TX 75081
USA
www.chem-crete.com
Tetraethylenepentamine 112-57-2
10-25%
ingredient determined to
To 100% Trade Secret
be non hazardous
OSHA Hazard Communication Standard 29 CFR 1910.1200 allows the MSDS information as to other
non-hazardous components top be utilized if they are considered proprietary, therefore, identities of
proprietary ingredients in this product are not listed here.
STABILITY AND REACTIVITY
Stability Stable
Incompatibility & conditions to avoid None
Materials to avoid Strong acids. Strong alkalis. Strong oxidising agents.
Decomposition and by products None
Hazardous Polymerization Will not occur
Conditions to avoid Any source of ignition.
IV. REGULATORY INFORMATION
EC Hazard Classification :
CORROSIVE
R Phases
R20 Harmful by inhalation.
R21 Harmful in contact with skin.
R22 Harmful if swallowed.
R36 Irritating to eyes
R37 Irritating to respiratory
R38 Irritating to skin
R43 May cause sensitization by skin contact.
S phases
S2 Keep out of the reach of children.
S24 Avoid contact with skin
S26 In case of contact with eyes, rinse immediately with plenty of water and seek a medical attention.
V. HEALTH HAZARD INFORMATION
HEALTH EFFECTS
Swallowed
Harmful if swallowed. Corrosive - causes severe damage to mouth, throat and digestive tract. May cause nausea, vomiting and diarrhea
Eye
Severe irritation. Causes irreversible damage to eye tissue if not removed promptly
Skin
INTERNATIONAL CHEM-CRETE CORPORATION
CORPORATE OFFICE
800 SECURITY ROW
RICHARDSON, TX 75081
USA
www.chem-crete.com
Harmful by absorption through the skin. Corrosive - causes severe burns. May cause sensitisation.
Inhaled
May cause respiratory irritation. High concentrations of vapours may cause headaches, dizziness and central nervous system depression.
FIRST AID
Swallowed
If swallowed do NOT induce vomiting. Give two glasses of water. Contact a doctor.
Eye
Irrigate with very generous quantities of water for 30 minutes. Consult a doctor.
Skin
Flush with soap and water
Inhaled
Remove from exposure.
EXPOSURE CONTROL
Technical Protective Measures
Wear protective clothing specified for normal operations.
Respiratory Protection
No respiratory protection is usually required under normal conditions of use.
Hand Protection
Wear Suitable Gloves
Eye Protection
Avoid contact with eyes. Wear chemical goggles if there is potential contact with eyes. Safety spectacles
Skin Protection
Wear chemical-resistant gloves and other clothing as required to minimize contact.
TOXICOLOGICAL INFORMATION
The following toxicological assessment is based on a knowledge of the toxicity of the product's components: Oral LD50, rat
>1600 mg/kg
Swallowed
Not likely to be a relevant route of exposure.
Eye
May be mildly irritating to the eyes. Contact with hot material can cause thermal burns which may
result in permanent damage or blindness
Skin
May be mildly irritating to the skin. Contact with hot material can cause thermal burns which may result in permanent
damage. May cause skin sensitization.
Inhaled
Not expected to be a relevant route of exposure, however,
under conditions where exposure to vapors or mists is
possible, could cause respiratory tract irritation.
ECOLOGICAL INFORMATION
This section will be updated as ecological reviews are completed.
VI. ACCIDENT RELEASE MEASURES
INTERNATIONAL CHEM-CRETE CORPORATION
CORPORATE OFFICE
800 SECURITY ROW
RICHARDSON, TX 75081
USA
www.chem-crete.com
Personal precautions : May burn although not readily ignitable. Use cautious judgment when cleaning
up large spills. Shut off leaks, if possible without personal risk.
Environmental precautions Dike and contain. Contain run-off and dispose of properly.
: Remove contaminated soil to remove contaminated trace residues. Prevent
from entering into drains, ditches or rivers.
Clean-up methods - small :
spillage
Soak up with an absorbent such as clay, sand or other suitable material. Place
in non-leaking container. Seal tightly for proper disposal.
Clean-up methods -large : Remove with vacuum trucks or pump to storage/salvage vessels. Soak up
spillage residue with an absorbent such as clay, sand or other suitable material; place in
non-leaking containers for proper disposal. Flush area with water to remove
trace residue.
Additional advice :
Notify authorities if any exposures to the general public or environment occurs
or is likely to occur. See Section 13 for information on disposal.
VII. PRECAUTION FOR USE
VENTILATION
Observe EPA standards.
PERSONAL PROTECTION
Gloves, goggles, and boots.
FLAMMABILITY
Product is not a flammable liquid.
VIII. SAFE HANDLING INFORMATION
Handling
Advice on safe handling : Avoid prolonged or repeated contact with skin, eyes and
clothing Avoid contact with skin, eyes and clothing Wash
thoroughly after handling. WARNING. May cause skin and
eye irritation. May cause skin sensitization. This resin may be
handled, shipped and stored at elevated temperature in bulk.
The recommended pumping temperature is 180 Deg. F.
Wash with soap and water before eating, drinking, smoking,
applying cosmetics, or using toilet facilities. Launder
contaminated clothing before reuse. Contaminated leather
articles, including shoes, cannot be decontaminated and
should be destroyed to prevent reuse. To prevent thermal
burns avoid contact with hot product.
Storage
Requirements for storage: Store in a cool, dry place with adequate ventilation. Keep areas and containers
closed when not in use. Keep away from open flames and high temperatures.
INTERNATIONAL CHEM-CRETE CORPORATION
CORPORATE OFFICE
800 SECURITY ROW
RICHARDSON, TX 75081
USA
www.chem-crete.com
ABBREVIATION
ACGIH : American Governmental Industrial Hygienists
ANSI : American National Standards Institute
Cal/OSHA : California Division of Occupational Safety and Health Administration
CAS: Chemical Abstract Service
DOT: Department of Transportation
EPA: Environmental Protection Agency
IARC : International Agency for Research on Cancer
Mg: milligrams
TSCA: Toxic Substance Control Act
MSDS : Material Safety Data Sheet
NIOSH: National Institute of Occupational Safety and Health
NTP: National Toxicology Limit
PEL : Permissible Exposure Limit
TLV: Threshold Limit Values
TWA : Time Weighted Average
|