MSDS
Material Safety Data Sheet
January 24, 2000
Revised Date:
PRODUCT NAME: EpoxySystems鈥? Product #419 (B-COMPONENT)
ITEM NUMBER: Product #419
DESCRIPTION: POLYURETHANE WATERPROOFING MEMBRANE CURATIVE
HMIS CODES: F: 2 R: 0 P: G
H:* 2
SECTION I - IDENTIFICATION
MANUFACTURER'S NAME: Epoxy Systems, Inc.
9370 SW208th Cir Dunnellon, FL 34431
EMERGENCY PHONE NO: CHEMTREC 800-633-8253
Information: 352-489-1666
SECTION II-HAZARDOUS INGREDIENTS
HAZARDOUS OSHA ACGIH OSHA LD50/ WT %
COMPONENTS / PEL TLV STEL LC50
CAS #
Aromatic Polyamine N/A 25 鈥? 50 %
CAS# MIXTURE
Aromatic Petroleum 100 ppm 100ppm/ TWA 150ppm LD: 4.7g/kg (rat, dermal) 50 鈥? 75 %
Naptha LC: >3370 ppm/8hrs
# 64742-95-6 (rat)
1
*Indicates toxic chemical(s) subject to the reporting requirements of section 313 of titleIII and of 40 CFR 372.
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
300OF 鈥? 335OF
Boiling Point
Vapor Density Greater than air
0.90 @ 77 OF
Specific Gravity (H2O=1)
Evaporation Rate Less than 1.0 (butyl Acetate = 1.0)
Solubility in water Slight
Appearance and odor Dark red / amber color liquid mixture, aromatic odor.
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
120OF (COC)
Flash Point
Flammable limits in air by volume LEL: 0.7% : UEL: 6.0%
Extinguishing media Use chemical foam, carbon dioxide or dry chemicals. Water spray the containers to cool them down.
Special Firefighting Procedures Wear self-contained breathing apparatus with full facepiece and protective clothing.
Unusual Fire and Explosion Hazards None known
SECTION V - REACTIVITY DATA
Stability Stable under normal conditions.
Conditions to avoid Avoid extreme temperature conditions such as heat, flame sparks etc.
Incompatibility (Materials to avoid) Avoid strong oxidizing agents.
Hazardous Decomposition or Combustion products: carbon dioxide, carbon monoxide, and nitrogen oxides.
Byproducts
Hazardous Polymerization Will not occur.
Page 1 of 3
SECTION VI - HEALTH HAZARD DATA
Health risks and symptoms of exposure
Inhalation Coughing, tightness in chest with difficulty in breathing, irritation to respiratory tract.
Skin Contact Skin irritation may cause redness itching, rash.
Eye Contact Irritation to eyes causing reddening and itching.
Skin Absorption No data available. Expected to be harmful.
Ingestion May cause irritation of the mouth, pharynx, esophagus and stomach.
Health hazards (acute & chronic):
CARCINOGENICITY: NO; NTP? No; IARC MONOGRAPHS: NO ; OSHA REGULATED: NO
Chronic Effects of Overexposure: A two year feeding study in rats showed the polyamine to cause effects in the pancreas, liver, thyroid and eyes. A increase in the
number of tumors in the liver and thyroid of male rats and in the liver and possibly mammary gland of female rats was found.
Medical conditions generally aggravated by exposure: Prolonged and repeated exposure may result to respiratory sensitization, asthma like conditions, central
nervous depression, skin sensitization and allergic skin reactions (rashes, hive-like, acme鈥檚, itching, etc.)
Emergency & First Aid Procedures
Eyes Immediately flush with plenty of water for at least 15 minutes. Keep eyelids open. Consult a physician
immediately.
Skin Wash material off with plenty of soap and water. If redness, itching or burning develops, consult a physician.
Inhalation Remove person to fresh air. If not breathing, give artificial respiration. If breathing is labored, give oxygen.
Get medical help immediately. Do not give any food or liquids to an unconscious person.
Ingestion Give 1 or 2 glasses of water to drink. If gastrointestinal symptoms develop, get medical help immediately. (Do
not give anything by mouth to an unconscious person). Induce vomiting immediately by giving two glasses of
water and sticking finger down throat.
SECTION VII - SAFE HANDLING & USE INFORMATION
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Wear protective equipment and clothing during cleanup. Soak up material with
absorbent and shovel into a chemical waste container. Cover the container but do not seal, and remove from work area. Wash the area of spill using soap and water. Do
not allow dirty cleaning water in sewer drain. Collect in a waste container and dispose in accordance to governmental regulations.
WASTE DISPOSAL METHOD: Dispose the waste in accordance to federal, local, and state regulations.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Prevent skin and eye contact. Avoid breathing vapors and mist. A sensitized person should not
be allowed to exposed to the product. Store in tightly sealed containers to protect from atmospheric moisture. Store in dry area.
OTHER PRECAUTIONS: Individuals with existing respiratory disease such as chronic bronchitis, emphysema or asthma like conditions should not be exposed to the
product. Do not drink, eat, or smoke while working with the product. Wash before such an activity. KEEP AWAY FROM CHILDREN. Keep away from ignition
sources such as fire, flame, sparks etc.
SECTION VIII - CONTROL MEASURES/PROTECTION INFORMATION
RESPIRATORY PROTECTION: Wear MSHA/NIOSH approved organic vapor or charcoal filtered cartridge respirator or positive pressure supplied air respirator
with full facepiece or an air-supplied hood.
VENTILATION: local and or mechanical exhaust.
PROTECTIVE GLOVES: Nitrile and butyl rubber gloves.
EYE PROTECTION: Chemical tight goggles, full faceshield in addition if splashing is possible.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: WORK/HYGIENIC PRACTICES: Tyvek, neoprene, butyl, nitrile rubber based clothing have excellent
resistance to aromatic solvents. Eyewash station and safety showers in the work area. Emergency safety plans if regulations require. Proper training of the usage and
application of the products.
SECTION IX 鈥? REGULATORY INFORMATION
Transportation: DOT Ground: Non-Regulated;
Sara Title III (Section 313 Toxic Chemical Information):
Chemical Name CAS Number Concentration
Xylene 1330-20-7 trace amount (present in Aromatic Naphtha Solvent)
California Proposition 65:
As per requirements of the Safe Drinking Water & Toxic Enforcement Act of California, USA (1986), the public is warned that
materials used in this product may create an exposure to chemicals known to the State of California to cause cancer, birth defects, or
reproductive harm. This warning is required by Section 25249.6 of the California Health and Safety Code.
{The following detectable components of this product are substances, or belong to classes of substances, known to the state of
California to cause cancer and /or reproductive toxicity.}
Page 2 of 3
Chemical Name CAS Number Concentration
Xylene 1330-20-7 trace amount (present in Aromatic Naphtha Solvent)
HMIS Ratings: Health: 2
Flammability: 2
Reactivity: 0
Protection: G (gloves, goggles, coverall/apron, respirator)
WHMIS Rating (Canada): Class B, Division 3, Class D, Division 2, Subdivision B.
Disclaimer: The data set forth in this MSDS are based on information provided by the suppliers of the raw materials and chemicals
used in the manufacture of the aforementioned product. Pacific Epoxy Systems, Inc.. makes no warranty with respect to the accuracy
of the information provided by their suppliers, and disclaims all liability of reliance thereof.
Page 3 of 3
|