-
SAFETY DATA SHEET Page: 1
Date: 1/2/07
MINERALISANT GUARD code : MG
1IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND THE COMPAGNY / UNDERTAKING
Type of product : Mineral surface hardener
Company identification Manufactured: UK
GUARD INDUSTRIE Epicuro Ltd
77-81 rue des Sorins Unit 12, Whitworth Road
93100 MONTREUIL Armstrong Industrial Estate
FRANCE Washington, Tyne & Wear
NE37 1PP
Tel: +33 (0)1.55.86.17.60 Tel: +44 (0)191 4187773
Fax:+33 (0)1.48.58.16.89 Fax: +44 (0)1914187643
2 COMPOSITION / INFORMATION ON INGREDIENTS
Composition Mineralisant Guard : Dangerous product (directive 1999/45/CE):
Substances presenting a danger to health and the environment under
Directive 67/548/CEE: NONE.
3 HAZARDS IDENTIFICATION
Primary route of exposure : Contact to skin and eyes
- Inhalation : Not considered as being dangerous under normal conditions of use
- Eye contact : Blushes, pain, blurred vision
- Ingestion : Not applicable
4 FIRST AID MEASURES
First aid measures
- Inhalation : Allow to breathe plenty of fresh air
- Skin contact : Wash with copious amounts of soapy water. Consult a doctor if irritations persist
- Eye contact : Rinse immediately with copious amounts of cold water. Consult a doctor immediately if the
pain, blinking, whimpering or the blushes persist
-Ingestion : Rinse mouth out with cold water
5 FIRE 鈥? FIGHTING MEASURES
Flammable class : Non- flammable
Specific hazards : Thermic decomposition generates corrosive vapour
Extinguishing media : All extinction agents are suitable
Protection against fire : Wear adequate protection equipment
Special procedure : Take care during any chemical product fire
nnnnn
6 ACCIDENTAL RELEASE MEASURES
Personal precautions : Supply adequate protection to cleaning teams. Respiratory protection equipment is useful.
Precautions for the environment : Avoid spillages into sewers and drinking water. Warn the appropriate authorities if the
product penetrates into sewers or waters in the public domain
: Sweep or collect spilt product and put it in a suitable vessel for removal and subsequent
Clean up methods
disposal. Dilute all residues and rinse with water.
7 HANDLING AND STORAGE
Technical protection measures : Handle carefully during the storing, transport, movement and the application of product, to
avoid an excessive dust accumulation
Storage : Keep in a dry and clean location. Keep in hermetically closed and correctly ventilated
containers, shielded from heat and any sparks or naked flames. Keep in a location protected
from fire
Handling : Product to be treated in accordance with good industrial hygiene and safety procedures.
Immediately wash eyes, skin and clothes if product comes into contact.
Wash your hands and other exposed skin areas with warm soap and water, before eating,
drinking, smoking, and before finishing work.
SAFETY DATA SHEET Page: 2
Date: 1/2/2007
MINERALISANT GUARD code : MG
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Respiratory protection : There is no need for any special equipment for respiratory protection under normal conditions
of use where there is adequate ventilation
Hand protection : Gloves
Skin protection : In the event of possible skin contact or contamination of clothing, wear protection
Eye protection : In the event of excessive dust being in the surrounding air, wear glasses
9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Sticky liquid
Colour : Amber
: 12
pH value
BoilingPoint [掳C] : 100
Final boiling point [掳C] : None
Density : 1.25
Flash point [掳C] : None
Solubility in water [掳C] : None
Auto-inflammation [掳C] : Not applicable
Inferior explosivity limit (%) : Not applicable
Superior explosivity limit (%) : Not applicable
Log P octanol/ water in 20掳C : None
10 STABILITY AND REACTIVITY
Dangerous decomposition products : None known
Material to avoid : None known
11 TOXICOLOGICAL INFORMATION
Ingestion : (rat) DL50 (mg/kg)
Skin contact : (rabbit) DL50 (mg/kg)
Inhalation (rat) : CL50 (mg/l/4h)
12 ECOLOGICAL INFORMATION
Bio-degradation [%] : >90
On ingredients : In accordance with European standards
13 DISPOSAL CONSIDERATIONS
: Auc Elimination procedure : Rinse with water
14 TRANSPORT INFORMATION
AED/RID : Not applicable
Labelling ADR : Not applicable
15 REGULATORY INFORMATION
Symboles : None
R Phrases : None
S Phrases : None
16 OTHER INFORMATION
Other information : None
The contents and format of this SDS are in accordance with EEC Commission Directive 2001/58EC.
DISCLAIMER OF LIABILITY: The information in this SDS was obtained from sources which we believe are reliable. However, the
information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling,
storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we
do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with
the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the
product is used as a component in another product, this MSDS information may not be applicable.
|