Epoxy Systems鈥欌劉
Material Safety Data Sheet
OSHA's Hazard Communication Standard,
29 CFR 1910.1200.
IDENTITY: Epoxy Systems Product 600 A Component
SECTION I
Manufacturer: Epoxy Systems, Inc. Emergency Number: 800-633-8253
Address: 9370SW208thCir Telephone Number: 352-489-1666
Dunnellon,FL34431 Date Prepared: 12/01
SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous Components CAS # OSHA PEL Hazard Limits %
Epoxy Resin 025085-99-8
NOTE: It is very unlikely that normal work operations with #600 could produce concentrations that are harmful to
humans.
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: N/A Specific Gravity (H20 =1): 1.15
Vapor Pressure (mm Hg.): N/A Melting Point: N/A
Vapor Density (AIR = 1): N/A Evaporation Rate: N/D
Solubility in Water: Slight (Butyl Acetate = 1)
Appearance and Odor: Yellowish liquid, mild odor
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): 480掳 F (PMCC)
Flammable Limits: LEL N/D UEL N/D
Extinguishing Media: Foam, dry chemical, or CO2
Special Fire Fighting Procedures: Wear positive pressure self-contained breathing apparatus.
Unusual Fire and Explosion Hazards: None
SECTION V - REACTIVITY DATA
Stability: Stable Conditions to Avoid: None known
Incompatibility: Bases
Hazardous Decomposition or Byproducts: Carbon monoxide
Hazardous Polymerization: Will Not Occur Conditions to Avoid: None known
(OVER)
Epoxy Systems Product 600 A Component Contd
SECTION VI - HEALTH HAZARD DATA
Route(s) of Entry: Inhalation? Yes Skin? Yes Ingestion? Yes
Health Hazards (Acute and Chronic): May cause eye irritation. Can cause allergic skin response. No hazards
anticipated from ingestion incidental to industrial exposure.
Carcinogenicity: NTP? Not Listed IARC Monographs? Not Listed OSHA Regulated? Not Regulated
Signs and Symptoms of Exposure: Skin rash and eye irritation.
Medical Conditions Generally Aggravated by Exposure: Skin sensitization.
Emergency and First Aid Procedures: Skin - Wash with soap and water. Eyes - Flush with water for at least 15
minutes.
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material Is Released or Spilled: Soak up with absorbent materials, such as sand and
collect in suitable containers.
Waste Disposal Method: Burn in approved incinerator in compliance with Federal, State, and Local regulations.
Precautions to Be Taken in Handling and Storing: Keep containers closed. Keep in cool area.
Other Precautions: Avoid breathing vapors of heated materials.
SECTION VIII - CONTROL MEASURES
Respiratory Protection: None normally needed.
Ventilation: Mechanical (General) Good general ventilation.
Protective Gloves: Rubber Gloves Eye Protection: Safety Glasses
Other Protective Clothing or Equipment: Clean work clothing.
Work/Hygienic Practices: Follow practices of good industrial hygiene.
N/A = Not Applicable N/D = Not Determined N/E = Not Established
Epoxy Systems鈥欌劉
Material Safety Data Sheet
OSHA's Hazard Communication Standard,
29 CFR 1910.1200.
IDENTITY: Epoxy Systems Product 600 B Component
SECTION I
Manufacturer: Epoxy Systems Inc. Emergency Number:1-800-633-8253
Address: 9370SW208thCir Telephone Number:352-489-1666
Dunnellon,FL34431 Date Prepared: 3/2001
SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous Components CAS # OSHA PEL Hazard Limits %
Modified Polyamine N/E
Liquid Polysulfide Polymer 68611-50-7 N/E
Titanium Dioxide 13463-67-7 10 mg/m;
Black Iron Oxide 1317-61-9 10 mg/m;
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: Unknown Specific Gravity (H20 =1): 1.35
Vapor Pressure (mm Hg.): <1 Melting Point: N/A
Vapor Density (AIR = 1): 6.53 Evaporation Rate: N/A
Solubility in Water: Slight (Butyl Acetate = 1)
Appearance and Odor: Gray liquid, mercaptan odor
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): 190掳 F (Tag Closed Cup)
Flammable Limits: LEL N/D UEL N/D
Extinguishing Media: Water fog, dry chemical, CO2
Special Fire Fighting Procedures: A positive pressure, self-contained breathing apparatus should be worn in
confined areas.
Unusual Fire and Explosion Hazards: None
SECTION V - REACTIVITY DATA
Stability: Stable Conditions to Avoid: None known
Incompatibility: Acids, bases
Hazardous Decomposition or Byproducts: Nitrogen oxides when burned
Hazardous Polymerization: Will Not Occur Conditions to Avoid: None known
(OVER)
Epoxy Systems Product 600 B Component Contd
SECTION VI - HEALTH HAZARD DATA
Route(s) of Entry: Inhalation? Yes Skin? Yes Ingestion? Yes
Health Hazards (Acute and Chronic): May cause severe injury to skin following prolonged or repeated contact. May
cause allergic responses. May cause severe skin irritation or pain. Prolonged contact may cause chemical burns. Ingestion may
cause burns of throat and mouth.
Carcinogenicity: NTP? Not Listed IARC Monographs? Not Listed OSHA Regulated? Not Regulated
Signs and Symptoms of Exposure: Eye irritation, skin irritation.
Medical Conditions Generally Aggravated by Exposure: Skin irritation
Emergency and First Aid Procedures: Skin - Wash thoroughly with soap and water. Eyes - Flush with copious
amounts of water for at least 15 minutes. Ingestion - Do not induce vomiting.
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material Is Released or Spilled: Contain spill. Broadcast absorbent material. Collect
in suitable containers.
Waste Disposal Method: Burn in approved incinerator in compliance with Federal, State, and Local regulations.
Precautions to Be Taken in Handling and Storing: Keep containers closed. Keep in cool area.
Other Precautions: Avoid breathing vapors.
SECTION VIII - CONTROL MEASURES
Respiratory Protection: NIOSH approved organic respirator in confined areas.
Ventilation: Mechanical (General) Good general ventilation.
Protective Gloves: Rubber Gloves Eye Protection: Safety Glasses
Other Protective Clothing or Equipment: Clean work clothing.
Work/Hygienic Practices: Follow practices of good industrial hygiene.
N/A = Not Applicable N/D = Not Determined N/E = Not Established
|