Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: epoxysystems_com---msds_893b.asp
MSDS
Material Safety Data Sheet
May 30, 1999
Revised: September 27, 2002

PRODUCT NAME: EpoxySystems鈥? Product #893B
ITEM NUMBER: 893B
DESCRIPTION: TWO-COMPONENT WATER BASE EPOXY PRIMER

HMIS CODES: F: 0 R: 0 P: C
H: * 1

SECTION I - IDENTIFICATION
MANUFACTURER'S NAME: Epoxy Systems, Inc.
Vermont & Florida
Telephone: 352-489-1666
EMERGENCY PHONE NO: 800-633-8253 PERS

SECTION II- INGREDIENTS
HAZARDOUS OSHA ACGIH OSHA LD50/ WT %
COMPONENTS / PEL TLV STEL LC50
CAS #


Polyamine No data No data No data LD50(rat, oral): 35 鈥? 50%
#mixture 6700mg/kg
LD50(dermal, rabbit):
>2000 mg/kg
LC50(rat, inhalation):
>10 mg/liter/1 hour
Water No data No data No data 50 - 65%




**All Chemicals comprising this product are listed on the Toxic Substance Control Act (TSCA) inventory. **



SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS

Boiling Point >212F
Vapor Density (air = 1) of water vapor
Specific Gravity (H2O=1) 1.00 鈥? 1.20
Evaporation Rate Slower than butyl acetate
Solubility in water Miscible in water
Appearance and odor Yellowish milky color liquid mixture, ammoniacal odor


SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Flash Point >200F (Fire Hazard Classification (NFPA) Water-based Mixture)
Flammable limits in air by volume LEL: N/AV UEL: N/AV
Extinguishing media Use water fog, foam, dry chemical or carbon dioxide
Special Fire-fighting Procedures Wear protective equipment and clothing in case of fire. Use self-contained breathing apparatus in case of fire.
A face shield should be worn. Fire-Fighters should wear butyl rubber boots, gloves, and body suit to prevent
exposure.
Unusual Fire and Explosion Hazards May generate toxic or irritating combustion products such as carbon monoxide, carbon dioxide, nitrogen oxide
gases and ammonia gas, in case of fire.


SECTION V - REACTIVITY DATA
Stability Stable under normal conditions.
Conditions to avoid Not applicable
Incompatibility (Materials to avoid) Mineral acids (sulfuric, phosphoric, etc.), Organic acids (acetic acid, citric acid etc). Oxidizing Agents
(perchlorates, nitrates etc).
Hazardous Decomposition or Carbon monoxide, carbon dioxide and nitrogen oxides in a fire. Possible Ammonia when heated. Irritating
Byproducts fumes at elevated temperatures.
Hazardous Polymerization Will not occur.


Page 1 of 3
SECTION VI - HEALTH HAZARD DATA
Health risks and symptoms of exposure
Inhalation May cause respiratory tract irritation. Inhalation of vapors and mist may cause coughing and irritation to
throat.
Skin Contact Skin irritant. May cause burning effect on skin. Prolonged and repeated skin contact may cause skin effects
such as rash, irritation or redness. May cause skin sensitization.
Eye Contact Corrosive to eyes. Severe eye irritant. Contact with eyes may cause severe irritation and pain. May burn eyes
which may result to blindness.
Skin Absorption None known
Ingestion Ingestion can cause irritation to mouth and stomach tissue.

Health hazards (acute & chronic):
CARCINOGENICITY: NTP? NO; IARC MONOGRAPHS: NO; OSHA REGULATED: NO

Medical conditions generally aggravated by exposure: Prolonged and repeated contact can result to central nervous system symptoms and eye effects such as
conjunctivitis or corneal damage.

Emergency & First Aid Procedures
Eyes Hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes. Get medical
attention immediately and promptly.
Skin Remove contaminated clothing and shoes. Remove product and immediately flush affected area with water for
at least 15 minutes. Launder contaminated clothing prior to reuse.
Inhalation Remove person to fresh air. If not breathing, give artificial respiration, preferable mouth-to-mouth. If
breathing is labored, give oxygen. Consult a physician immediately. DO NOT GIVE ANYTHING BY
MOUTH TO AN UNCONSCIOUS PERSON.
Ingestion If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting
only as directed by medical personnel. Never give anything by mouth to an unconscious person.


SECTION VII - SAFE HANDLING & USE INFORMATION
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Under normal condition, any leaks or spill will not flow. However a spill should be
collected in a waste container. The collected waste can be disposed either by solidifying with the A-Component (Resin side) or as is in accordance to regulations. Wear
necessary protective equipment and clothing to avoid contact.

WASTE DISPOSAL METHOD: Dispose the waste in accordance to local, state and federal rules and regulations.

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Store in a cool dry place. Keep away from open flames and high temperatures. Avoid eye and
skin contact. Wash with soap and water before eating, drinking, and smoking, applying cosmetics or using toilet facilities. Launder contaminated clothing before reuse.
Dispose contaminated clothing and protective equipment if unable to decontaminate.

OTHER PRECAUTIONS: KEEP AWAY FROM CHILDREN. Keep away from ignition sources such as fire, flame and sparks.


SECTION VIII - CONTROL MEASURES/PROTECTION INFORMATION
RESPIRATORY PROTECTION: Not required under normal conditions in a well-ventilated workplace. In atmospheres where the material is sprayed, workers
should avoid contact with aerosols through usage of proper protective equipment such as full-face air-supplied respirators or respirators with charcoal or organic vapor
cartridge.

VENTILATION: local and or mechanical exhaust advisable.

PROTECTIVE GLOVES: Chemical resistant gloves such as neoprene, butyl rubber, and nitrile.

EYE PROTECTION: Chemical tight goggles; full faceshield in addition if splashing is possible.

OTHER PROTECTIVE CLOTHING OR EQUIPMENT: WORK/HYGIENIC PRACTICES: Wear coveralls or aprons to protect from skin contact. Provide
eyewash stations and showers. Provide proper training to the applicators. Wash before eating, drinking, smoking or using the restroom. Wash the contaminated clothing
and equipment before reusing them.

SECTION IX 鈥? REGULATORY INFORMATION
Transportation: DOT: Not Regulated

Sara Title III (Section 313 Toxic Chemical Information):
Chemical Name CAS Number Concentration
None Known

California Proposition 65: Substances known to the State of California to cause cancer and/or reproductive toxicity and subject to warning and discharge requirements
under the 鈥淪afe Drinking Water and Toxic Enforcement Act of 1986鈥?).

NONE


HMIS Ratings: Health: 1
Flammability: 0
Reactivity: 0
Page 2 of 3
Protection: C (gloves, goggles, coverall/apron)


Disclaimer: The data set forth in this MSDS are based on information provided by the suppliers of the raw materials and chemicals used in the manufacture of the
aforementioned product. Pacific Polymers International, Inc. makes no warranty with respect to the accuracy of the information provided by their suppliers, and
disclaims all liability of reliance thereof.




Page 3 of 3

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
epicindustries_com---88_epc_endgerm_hospital_dis.asp 8001-54-5 9036-19-5
epicuro_co_uk---msds_antimousses_guard.asp 68424-85-1
epicuro_co_uk---msds_asp.asp N/A
epicuro_co_uk---msds_bridgeguard_color_epicuro.asp N/A
epicuro_co_uk---msds_bridge_guard_epicuro.asp N/A
epicuro_co_uk---msds_exa.asp N/A
epicuro_co_uk---msds_exb1.asp N/A
epicuro_co_uk---msds_mineralisant_guard_epicuro.asp N/A
epicuro_co_uk---msds_pavix_ccc100-f.asp N/A
epicuro_co_uk---msds_prc.asp N/A
epicuro_co_uk---msds_sofix_ccc100.asp N/A
epicuro_co_uk---msds_sofix_ccc700.asp N/A
epicuro_co_uk---msds__ccc150.asp N/A
epicuro_co_uk---msds__cem_220.asp N/A
epicuro_co_uk---msds__cem_290-h.asp N/A
epicuro_co_uk---msds__chem-inject_100.asp N/A
epicuro_co_uk---msds__chem-sewer.asp N/A
epicuro_co_uk---msds__chem-underwater_injection.asp N/A
epicuro_co_uk---msds__e-4301.asp N/A
epicuro_co_uk---msds__flex_foam.asp N/A
epoxysystems_com---302.asp N/A
epoxysystems_com---410.asp 584-84-9
epoxysystems_com---419b.asp 64742-95-6
epoxysystems_com---600.asp 025085-99-8
epoxysystems_com---641.asp 025085-99-8 112945-52-5 028064-14-4
epoxysystems_com---msds_893b.asp N/A
etigra_com---chlormequat_e-pro_msds_approved_051606.asp 999-81-5
etigra_com---chlorpyrifos_e-pro_0.5_msds_rev_1206.asp 2921-88-2
etigra_com---chlorpyrifos_e-pro_1_msds_rev_0107.asp 2921-88-2
etigra_com---chlorpyrifos_g-pro_1_msds.asp 2921-88-2
etigra_com---diquat_e-pro_2_l_herbicide_msds_rev_0408.asp 85-00-7
etigra_com---double_o_e-pro_msds_rev_0606.asp 42874-03-3 19044-88-3
etigra_com---firewall_17_wp_msds_rev_1207.asp 3810-74-0 14808-60-7
etigra_com---imazapic_e_2_sl_herbicide_msds_rev_0208.asp 104098-48-8
etigra_com---imazuron_e-pro_herbicide_msds_rev_0907.asp 81334-34-1 330-54-1
etigra_com---imida_e-ag_5_f_st_msds_rev_1106.asp 138261-41-3
etigra_com---imida_e-pro_2f-t&o_insecticide_msds_rev_1007.asp 138261-41-3
etigra_com---imida_e-pro_60_wsp_orn_msds_rev_0606.asp 138261-41-3
etigra_com---imida_e-pro_75_wsp_pre-post_construction_msds.asp 138261-41-3
etigra_com---imida_e-pro_75_wsp_turf_msds_rev_0706.asp 138261-41-3
etigra_com---mepiquat_e-ag_msds_rev_0207.asp 24307-26-4
etigra_com---msm_e-ag_60eg_msds_rev_0606.asp 74223-64-6
etigra_com---msm_e-pro_-_turf_msds_rev_1006.asp 74223-64-6
etigra_com---msm_e-pro_60_eg_msds.asp 74223-64-6
etigra_com---permethrin_e-pro_msds_rev_1006.asp 52645-53-1 8052-41-3 102-76-1 95-63-6
etigra_com---propiconazole_e-pro_14.3_mec_fungicide_msds_rev_1207.asp 60207-90-1
etigra_com---propiconazole_gpro_msds.asp 60207-90-1
etigra_com---sethoxydim_e-pro_msds_rev_0107.asp 74051-80-2 91-20-3
etigra_com---sfmmsm_e-pro_msds_.asp 74222-97-2 74223-64-6
etigra_com---sfm_e-pro_75_eg_msds_rev_0407.asp 74222-97-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC