Epoxy Systems鈥欌劉
Material Safety Data Sheet
OSHA's Hazard Communication Standard,
29 CFR 1910.1200
IDENTITY: Epoxy Systems鈩? Product #410 鈥淎鈥? Component
SECTION I
Manufacturer: Epoxy Systems鈥欌劉 Emergency Number:1-800-633-8253
Address: 9370 SW 208th Cir Telephone Number:352-489-1666
Dunnellon,FL34431 Date Printed: 7/03
SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous Components CAS # OSHA PEL Hazard Limits%
Toluene Diisocyanate 584-84-9
This is a Polyurethane Isocyanate terminated Prepolymer.
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: 300潞 F Specific Gravity (H20 =1): 1.06
Vapor Pressure (mm Hg.): N/D Melting Point: N/A
Vapor Density (AIR = 1): 1.02 Evaporation Rate: N/D
Solubility in Water: Not soluble (Butyl Acetate = 1) N/D
Appearance and Odor: Yellowish Liquid
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): > 230 F
Flammable Limits: LEL N/D UEL N/D
Extinguishing Media: Foam, dry chemical, or CO2 .
Special Fire Fighting Procedures: Wear self-contained breathing apparatus.
Unusual Fire and Explosion Hazards: None.
SECTION V - REACTIVITY DATA
Stability: Stable Conditions to Avoid: None
Incompatibility: Moisture, strong oxidants, alcohols, amines.
Hazardous Decomposition or Byproducts: CO.
Hazardous Polymerization: Will Not Occur Conditions to Avoid: None known
(OVER)
#410 鈥淎鈥? Comp.
SECTION VI - HEALTH HAZARD DATA
Route(s) of Entry: Inhalation? Yes Skin? Yes Ingestion? Yes
Health Hazards (Acute and Chronic): May cause irritation of skin, eyes and respiratory tract due to traces of TDI.
May cause allergic respiratory reaction.
Carcinogenicity: NTP? IARC Monographs? OSHA Regulated?
Anticipated Human Carcinogen Group 2B Not regulated
Signs and Symptoms of Exposure: Difficulty in breathing, tightness in chest, skin irritation.
Medical Conditions Generally Aggravated by Exposure: Asthmatic reaction possible.
Emergency and First Aid Procedures: Eyes - Immediately flush eyes with plenty of water for at least 15 minutes.
Skin - Wipe excess from skin and flush with plenty of water for at least 15 minutes follow by washing with soap and
water.
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material Is Released or Spilled: Damp and soak up with absorbent material. Collect
for disposal.
Waste Disposal Method: Burn in approved incinerator in compliance with Federal, State, and Local regulations.
Precautions to Be Taken in Handling and Storing: Keep containers closed. Keep away from water or moisture.
Other Precautions: Avoid breathing vapors and contact with heated materials. Wash after handling.
SECTION VIII - CONTROL MEASURES
Respiratory Protection: Supplied air respirators in area where TDI exceeds threshold limits.
Ventilation: Mechanical (General) Good general ventilation.
Protective Gloves: Rubber Gloves Eye Protection: Safety Glasses
Other Protective Clothing or Equipment: Clean long sleeve clothing.
Work/Hygienic Practices: Follow practices of good industrial hygiene.
N/A = Not Applicable N/D = Not Determined N/E = Not Established
Epoxy Systems鈥欌劉
Material Safety Data Sheet
OSHA's Hazard Communication Standard,
29 CFR 1910.1200
IDENTITY: Epoxy Systems鈥欌劉 Product #410 鈥淏鈥? Component
SECTION I
Manufacturer: Epoxy Systems鈥欌劉 Emergency Number:1-800-633-8253
Address: 9370 SW 208th Cir Telephone Number:352-489-1666
Dunnellon,FL34431 Date Printed: 7/03
SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous Components CAS # OSHA PEL Hazard Limits %
Magnesium Silicate 14807-96-6 2 mg/m鲁
Butyl Benzyl Pthalate 85-67-7 N/D
Aromatic Amine Trade Secret N/D
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: 320潞 F Specific Gravity (H20 =1): 1.63
Vapor Pressure (mm Hg.): N/A Melting Point: N/A
Vapor Density (AIR = 1): 1.05 Evaporation Rate: N/A
Solubility in Water: Non-Soluble (Butyl Acetate = 1)
Appearance and Odor: Gray paste, Aromatic odor
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): > 110潞 F (Tag Closed Cup)
Flammable Limits: LEL N/D UEL N/D
Extinguishing Media: Foam, dry chemical, CO2 or Water spray
Special Fire Fighting Procedures: Wear self-contained breathing apparatus
Unusual Fire and Explosion Hazards: None
SECTION V - REACTIVITY DATA
Stability: Stable Conditions to Avoid: None
Incompatibility: N/A
Hazardous Decomposition or Byproducts: Oxides of nitrogen, CO
Hazardous Polymerization: Will Not Occur Conditions to Avoid: None known
(OVER)
#410 鈥淏鈥? Comp
SECTION VI - HEALTH HAZARD DATA
Route(s) of Entry: Inhalation? Yes Skin? Yes Ingestion? Yes
Health Hazards (Acute and Chronic): Prolonged exposure to solvents may cause brain, nervous systems, liver, or
kidney damage.
Carcinogenicity: NTP? Not Listed IARC Monographs? Not Listed OSHA Regulated? Not Regulated
Signs and Symptoms of Exposure: Redness and irritation of the affected area.
Medical Conditions Generally Aggravated by Exposure: None
Emergency and First Aid Procedures: Eyes: Flush with water for at least 15 minutes. Skin: Wash thoroughly with
soap & water. If conditions continue, seek medical attention.
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material Is Released or Spilled: Scoop up in suitable collections containers.
Waste Disposal Method: Burn in approved incinerator in compliance with Federal, State, and Local regulations.
Precautions to Be Taken in Handling and Storing: Keep containers closed. Store in cool area.
Other Precautions: Avoid breathing vapors and avoid skin contact
SECTION VIII - CONTROL MEASURES
Respiratory Protection: In confined areas NIOSH approved organic respirator.
Ventilation: Mechanical (General) Good general exhaust to keep vapors below PEL.
Protective Gloves: Rubber or impervious plastic Eye Protection: Safety Glasses
Other Protective Clothing or Equipment: Clean work clothing.
Work/Hygienic Practices: Follow practices of good industrial hygiene.
N/E = Not Established
N/A = Not Applicable N/D = Not Determined
|