MSDS_PRC
EEC Safety Data Sheet
according to Directive 91/155/EEC
Revised on:
1. Identification of the preparation and the company
January 10, 2006
Product name and/or code:
EKOSORB PR-C
Company: CHEMSTAR Czech Republic, s.r.o. Sole distributor in UK:
Alej Svobody 881/56
PCIS Ltd.
323 18 Plze艌 Unit 12
Whitworth Road
Czech Republic
Armstrong Industrial Estate
Washington
Phone: ++420 777 0 102
Tyne & Wear
Fax : ++420 377 549 183
NE37 1PP (UK)
E-mail : chemstar@chemstar.cz
Tel: +44 191 4187773
Fax: +44 191 4187643
Type of product: Application field:
Anti- Graffiti Protective Coating Graffiti protection
2. Composition/information on ingredients
Chemical name of hazardous substances
Name CAS-No. Conc. range Symbol R-phrases
Emulgated natural wax in water 5鈥?6% Xi 38
3. Hazards identification
According to Directive 88/379/EEC the product is classified:
The product is not classified as a dangerous chemical composition according to the law.
1
MSDS_PRC
4. First aid measures
General Call a physician in case of health discomfort and doubt.
Inhalation If inhaled, remove to fresh air. Call a physician if necessary.
Eye Contact In case of contact, immediately flush eyes with copious amounts of water for at least 15
minutes, call a physician as soon as possible.
Skin Contact In case of contact, immediately wash skin with soap and copious amounts of water.
Ingestion If swallowed, wash out mouth with water provided person is conscious. Do not induce
vomitting! Call a physician soon and show the label.
5. Fire-fighting measures
Suitable: For extinguishing of the material environment use the foam or powder extinguisher.
Unsuitable : Direct water stream
Specific Hazard(s): Carbon monooxide in case of low-oxygen burning.
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes in case of
release of bigger amounts of fumes/gases .
6. Accidental release measures
PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Not necessary
METHODS FOR CLEANING UP
See Chapter 13.
7. Handling and storage
HANDLING
Follow service instructions. Avoid contact with eyes, skin, and clothing.
STORAGE
Conditions of Storage: Keep in cool place.
SPECIAL REQUIREMENTS
No
2
MSDS_PRC
8. Exposure controls/personal protection
ENGINEERING CONTROLS
Not necessary.
GENERAL HYGIENE MEASURES
Wash thoroughly after handling.
EXPOSURE LIMITS
Not given in the country of origin.
Personal protection
Respiratory protection: not necessary
Hand protection: not necessary but gloves recommended.
Eye protection: not necessary
General protection
and hygiene: The usual precautions for the handling of chemicals must be observed.
9. Physical and chemical properties
Colour and form: White liquid Solubility in water: Partly soluble
Density: Not determined Flash point: Not determined
Vapour pressure (20掳C): BP range: Not determined
Not determined
pH range: 5鈥?7 Limits of exlosion: Non-explosive
Autoignition Temp.: Not determined MP range: Not determined
10. Stability and reactivity
STABILITY
Stability: Stable
Conditions to Avoid: hot surfaces
Materials to Avoid: during specified use is the material stable
HAZARDOUS DECOMPOSITION PRODUCTS
No in the course of common use.
HAZARDOUS POLYMERIZATION
Will not occur
11. Toxicological information
There is no data available on the product itself.
12. Ecological information
3
MSDS_PRC
There is no data available on the product.
13. Disposal considerations
Contact a licensed professional waste disposal service to dispose of this material. Observe all federal, state,
and local environmental regulations.
14. Transport information
ADR/RID IMDG
Class/Item number/Letter TEC(R) Class PG MP UN-no. EmS MFAG
Non-hazardous for road transport Non-hazardous for sea transport
Proper technical name IATA
Graffiti remover Non-hazardous for air transport
Not subject to transport regulation
15. Regulatory information
Labelling according to EEC Directive 88/379/EEC.
No
Danger symbol:
Contains: Not a dangerous composition
R-phrases:
S-phrases:
16. Other information
The information contained in this safety data sheet is provided in accordance with the requirements of the
Chemicals (Hazard Information and Packaging) Regulations.
The product should not be used for purposes other than those shown in Section 1 without first referring to the
supplier and obtaining written handling instructions. As the specific conditions of use of the product are outside
the supplier's control, the user is responsible for ensuring that the requirements of relevant legislation are
complied with.
The information contained in this safety data sheet is based on the present state of knowledge and current
national legislation. It provides guidance on health, safety and environmental aspects of the product and should
not be construed as any guarantee of technical performance or suitability for particular applications.
4
|