MATERIAL SAFETY DATA SHEET
1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Trade Name ADHESIVE WIPE ON AGENT PP
124
MSDS Number
N/A
CAS Number
TRANS TECH AMERICA, INC.
Supplier
475 N. GARY AVENUE
CAROL STREAM, IL 60188 USA
Telephone Numbers - 24 Hour Emergency Assistance
Emergency (352)323-3500
Telephone Numbers - General Assistance
Information (630)752-4000
2 COMPOSITION / INFORMATION ON INGREDIENTS
Concentration
Ingredient Name CAS Number Exposure Limits / Health Hazards
TOLUENE 108-88-3 90 - 95 % ACGIH TLV: 385mg/m3
XYLENES 1330-20-7 1-5% OSHA TWA: 100ppm; OSHA STEL:
150ppm
3 HAZARDS IDENTIFICATION
Signs & Symptoms of Short-Term (Acute) Exposure
Excessive vapor concentration in air, especially in confined spaces, may cause asphyxiation. Excessive inhalation of
vapors can cause nasal, throat and respiratory irritation, dizziness, weakness, fatigue, nausea, headache and possible
unconsciousness. Eye contact causes irritation, redness, tearing, blurred vision. Eye contact with liquid or vapor causes
severe irritation, redness, tearing, blurred vision. Vapors may cause severe eye irritation, redness, tearing and blurred
vision. Prolonged skin contact may lead to extraction of natural oils with resultant dry skin, cracking, irritation and
determatitis. Swallowing may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Notice: intentional misuse by
deliberately concentrating and inhaling the contents maybe harmful or fatal. Reports have associated repeated and
prolonged occupational overexposure to solvents with permanent brain and nervous system damage.
Effects of Long-Term (Chronic) Exposure
The effects of excessive, long term exposure to this product have not been fully investigated. Health studies have shown
that many solvents pose potential human health risks which may vary from person to person. As a precaution, exposure to
liquids and vapors should be minimized. Prolonged or continuous inhalation of vapors may result in delayed lung damage.
Repeated or prolonged inhalation of vapor may cause liver and kidney damage. Repeated inhalation of vapor in high
concentration can change the blood picture. Other Health Warnings: This product is unlikely to harm health, given normal
and proper handling and hygienic precautions. Prolonged inhalation of vapors in high concentrations may lead to
headache, giddiness and nausea. In case of contact with the product: Danger of re sorption through the skin, irritation of
skin/mucous membranes.
4 FIRST AID MEASURES
Skin
Wash away with soap and water and rinse. Do not use solvents or thinners.
Eye
Remove contact lenses, keep eyelids open. Keep eyelids lifted. Flush with large quantities of water for 15 minutes.
Consult a physician.
Printed On 1-Apr-03
ND = No Data NA = Not Applicable NI = Not Indicated
124 ADHESIVE WIPE ON AGENT PP
Material Id Trade Name 1/ 4
Inhalation
Take the casualty into the fresh air and keep warm. Irregular breathing/no breathing: artificial respiration. Call a
physician.
Ingestion
Do not induce vomiting. Call a physician. Keep at rest.
Medical Conditions Aggravated by Exposure
ND
5 FIRE FIGHTING MEASURES
Extinguishing Media
Chemical powder, carbonic acid - co2, foam.
Basic Fire Fighting Procedures
Water spray may be ineffective. For extinguishing larger fires or inside buildings an independent self-contained breathing
apparatus is recommended to protect firefighters from any hazardous combustion products.
Unusual Fire & Explosion Hazards
Vapors are heavier than air and may spread along floors. Vapors may form explosive mixtures with air. Preparation may
charge electrostatically: always use earthing leads when transferring from one container to another. Operators should wear
anti static footwear and clothing. No sparking tools should be used.
6C
Flash Point
0.8
Flammability Limits in Air, Lower, % by Volume
6 ACCIDENTAL RELEASE MEASURES
Environmental Precautions
Do not empty into drains. If the product contaminates lakes, rivers or sewer systems, inform appropriate authorities in
accordance with local regulations.
Spill or Leak Procedure
Contain and collect spillage with non-combustible absorbent materials, e.g., sand, earth, vermiculite, diatomacious earth
and place in container for disposal according to local regulations. Clean preferably with a detergent. Avoid use of solvents.
7 HANDLING & STORAGE
Handling
Prevent the creation of flammable or explosive concentration of vapor in air and avoid vapor concentration higher than the
occupational exposure limits. Additionally, the product should only be used in areas from which all naked lights and other
sources of ignition have been excluded. Comply with the health and safety at work laws.
Storage
Containers which are opened must be carefully released and kept upright to prevent leakage. Keep container tightly closed.
Never use pressure to empty; container is not a pressure vessel. No smoking. Prevent unauthorized access. Always keep
in containers of same material as the original one. Avoid heating and direct sunlight.
Ventilation
Provide sufficient ventilation to keep vapor concentration below the given TLV and LEL.
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Eye Protection: Personal Protection Equipments (PPE)
Use splash goggles.
Printed On 1-Apr-03
ND = No Data NA = Not Applicable NI = Not Indicated
124 ADHESIVE WIPE ON AGENT PP
Material Id Trade Name 2/ 4
Skin Protection: Personal Protection Equipments (PPE)
Use appropriate protective gloves when handling. After washing hands, replace lost skin fat by fat containing skin creams.
Use chemical-resistant apron or other impervious clothing, if needed, to avoid contaminating regular clothing which could
result in prolonged or repeated skin contact. All parts of the body should be washed after contact.
Respiratory Protection: Personal Protection Equipments (PPE)
If work place limits are exceeded, a gas mask approved for this particular job must be worn.
General
In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious
person. Unconsciousness: Lateral position - call a physician. We have no knowledge or control over the individual user's
working conditions. However, the product may not be used for any purpose other than that specified in Chapter one. The
user is responsible for the observance of all required statutory provisions.
9 PHYSICAL & CHEMICAL PROPERTIES
Odor and Appearance
Clear liquid with aromatic odor
111 - 137 C
Boiling Point
0.9
Specific Gravity
NA
Melting Point
97.5
Percent Volatile
29 C
Vapor Pressure
NA
Evaporation Rate
>1
Vapor Density
Not water reactive
Solubility In Water
10 STABILITY & REACTIVITY
Stability/Incompatibility
Keep away from oxidizing agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions.
Hazardous Reactions/Decomposition Products
Ni
Hazardous Polymerization
Will not occur.
11 TOXICOLOGICAL INFORMATION
Routes of Exposure
Inhalation: remove to fresh air. Restore breathing. Treat symptomatically. Consult a physician. Eyes: splash: flush
immediately with large amounts of water for at least 15 minutes. Take to a physician for medical treatment. Skin: splash:
wash affected areas with soap and water. Remove contaminated clothing. Consult a physician if irritation persists.
Ingestion: do not induce vomiting. Consult a physician or poison control center immediately, treat symptomatically.
12 ECOLOGICAL INFORMATION
13 DISPOSAL CONSIDERATIONS
Waste Disposal
Disposal according to federal, state and local regulations.
14 TRANSPORT INFORMATION
Printed On 1-Apr-03
ND = No Data NA = Not Applicable NI = Not Indicated
124 ADHESIVE WIPE ON AGENT PP
Material Id Trade Name 3/ 4
Department of Transportation (DOT) Requirements:
General Transportation Information for Bulk Shipments
Proper Shipping Name Paint Related Material
Hazard Class 3 UN/NA Code 1263
Packaging Group Class III
Labels Required Flammable Liquid
15 REGULATORY INFORMATION
NFPA Ratings
Health Flammability Reactivity Special Hazards
HMIS Ratings
Health 1 Flammability 3 Reactivity 1 Personal Prot. Equip. C
Following ingredients of this product are listed in SARA313
SARA Listed Ingredient Name CAS Number Maximum %
XYLENES 1330-20-7
Listed on the following Regulatory List(s)
SARA 313
16 OTHER INFORMATION
Disclaimer
This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of
Trans Tech America, Inc. The data on this sheet applies only to the specific material designated herein. Trans Tech
America, Inc. assumes no legal responsibility for use of reliance upon this data.
6/6/2001 7/8/1999
Replaces Sheet Dated
Completed On
TRANS TECH AMERICA, INC.
Completed By
Printed On 1-Apr-03
ND = No Data NA = Not Applicable NI = Not Indicated
124 ADHESIVE WIPE ON AGENT PP
Material Id Trade Name 4/ 4
|