Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

61788-76-9

File Name: itwtranstech_com---elastifying_agent_nl.asp
                                   MATERIAL SAFETY DATA SHEET


1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Trade Name INK ELASTIFYING AGENT NL
1
Version Number
212
MSDS Number
- -0
CAS Number
TRANS TECH AMERICA, INC.
Supplier
475 N. GARY AVENUE
CAROL STREAM, IL 60188 USA

Telephone Numbers - 24 Hour Emergency Assistance
Emergency (352)353-3500
Telephone Numbers - General Assistance
Information (630)752-4000

2 COMPOSITION / INFORMATION ON INGREDIENTS
Concentration
Ingredient Name CAS Number Exposure Limits / Health Hazards
CHLORINATED, ALIPHATIC 61788-76-9 100 % mg/m3 ACGIH TWA
HYDROCARBON WITH 56% CHLORINE


3 HAZARDS IDENTIFICATION
Signs & Symptoms of Short-Term (Acute) Exposure
Excessive vapor concentration in air, especially in confined spaces, may cause asphyxiation. Excessive inhalation of
vapors can cause nasal, throat and respiratory irritation, dizziness, weakness, fatigue, nausea, headache and possible
unconsciousness. Eye contact causes irritation, redness, tearing, blurred vision. Eye contact with liquid or vapor causes
severe irritation, redness, tearing, blurred vision. Vapors may cause severe eye irritation, redness, tearing and blurred
vision. Prolonged skin contact may lead to extraction of natural oils with resultant dry skin, cracking, irritation and
dermatitis. Swallowing may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Notice: intentional misuse by
deliberately concentrating and inhaling the contents maybe harmful or fatal. Reports have associated repeated and
prolonged occupational overexposure to solvents with permanent brain and nervous system damage.

Effects of Long-Term (Chronic) Exposure
Health studies have shown that many solvents pose potential human health risks which may vary from person to person.
As a precaution, exposure to liquids and vapors should be minimized. Prolonged or continuous inhalation of vapors may
result in delayed lung damage. Repeated or prolonged inhalation of vapor may cause liver and kidney damage. Repeated
inhalation of vapor in high concentration can change the blood picture.


4 FIRST AID MEASURES
Skin
Wash with soap and water.

Eye
Flush with water for at least 15 minutes, consult a physician.

Inhalation
Move to fresh air. Give artificial respiration if necessary.



Printed On 21-Feb-02
ND = No Data NA = Not Applicable NI = Not Indicated
212 INK ELASTIFYING AGENT NL
Material Id Trade Name 1/ 4
Ingestion
Do not induce vomiting. Do not drink water, milk or oil. Consult physician or poison control center immediately. Treat
symptomatically.


5 FIRE FIGHTING MEASURES
Extinguishing Media
Foam, carbon dioxide, dry chemical powder.

Basic Fire Fighting Procedures
Water may be ineffective. Water should be used to cool containers exposed to fire. Fire fighting personnel should wear
self-contained breathing apparatus.

Unusual Fire & Explosion Hazards
Keep containers tightly closed, isolate from heat, sparks, electrical equipment and open flame. Closed containers may
explode when exposed to extreme heat. During emergency conditions over exposure to decomposition products may cause
a health hazard. Symptoms may not be immediately apparant. Obtain medical attention.
150 C
Flash Point
0.8
Flammability Limits in Air, Lower, % by Volume


6 ACCIDENTAL RELEASE MEASURES
Spill or Leak Procedure
Refer to protective measures listed in sections 4, 5, 6, 8, and 9. Remove all sources of ignition, avoid breathing vapors,
ventilate area, remove with liquid binding material.


7 HANDLING & STORAGE
Handling
Do not take internally, use approved printing procedures, observe label precautions. Keep closures tight and container
upright to prevent leakage. Do not weld or flame cut an empty drum, do not handle until the manufacturers safety
precautions have been read and understood.

Storage
Store containers out of sun and away from heat, sparks, and open flames, close containers after each use. Consult NFPA
code for additional storage requirements.

Ventilation
Provide sufficient ventilation to keep vapor concentration below the given TLV and LEL.


8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Eye Protection: Personal Protection Equipments (PPE)
Use safety eyewear designed to protect against splash ot liquids.

Skin Protection: Personal Protection Equipments (PPE)
Required for prolonged or repeated contact, refer to safety equipment supplier for effective glove recommendations.

Respiratory Protection: Personal Protection Equipments (PPE)
Adequate ventilation is required. See your safety equipment supplier for evaluation and recommendation.

General
Eye bath and shower should be available. Use chemical resistant clothing. Liquid may penetrate shoes and leather causing
delayed irritation.




Printed On 21-Feb-02
ND = No Data NA = Not Applicable NI = Not Indicated
212 INK ELASTIFYING AGENT NL
Material Id Trade Name 2/ 4
9 PHYSICAL & CHEMICAL PROPERTIES
Odor and Appearance
Yellow liquid with slight odor
200 C
Boiling Point
1.3
Specific Gravity
NI
Melting Point
0
Percent Volatile
NI
Vapor Pressure
slower
Evaporation Rate
heavier
Vapor Density
NI
Solubility In Water


10 STABILITY & REACTIVITY
Stability/Incompatibility
Stable Avoid peroxides and other strong oxidizing materials.

Hazardous Reactions/Decomposition Products
Ni

Hazardous Polymerization
Carbon monoxide, carbon dioxide, smoke, oxides of nitrogen.


11 TOXICOLOGICAL INFORMATION
Routes of Exposure
Ni


12 ECOLOGICAL INFORMATION

13 DISPOSAL CONSIDERATIONS
Waste Disposal
Incinerate in an approved facility. Do not incinerate closed containers. Dispose of in accordance with federal, state and
local pollution control requirements.


14 TRANSPORT INFORMATION
Department of Transportation (DOT) Requirements:
General Transportation Information for Bulk Shipments
Proper Shipping Name Combustible Liquid
Hazard Class Class III B UN/NA Code 3082


15 REGULATORY INFORMATION
NFPA Ratings
Health Flammability Reactivity Special Hazards
HMIS Ratings
Health 1 Flammability 1 Reactivity 1 Personal Prot. Equip. C




Printed On 21-Feb-02
ND = No Data NA = Not Applicable NI = Not Indicated
212 INK ELASTIFYING AGENT NL
Material Id Trade Name 3/ 4
16 OTHER INFORMATION
Disclaimer
This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of
Trans Tech America, Inc. The data on this sheet applies only to the specific material designated herein. Trans Tech
America, Inc. assumes no legal responsibility for use of reliance upon this data.

4/3/1998 Replaces Sheet Dated
Completed On
TRANS TECH AMERICA, INC.
Completed By




Printed On 21-Feb-02
ND = No Data NA = Not Applicable NI = Not Indicated
212 INK ELASTIFYING AGENT NL
Material Id Trade Name 4/ 4

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
interconchemical_com---pro-con-down-the-drain.asp N/A
interconchemical_com---pro-con-emr3.asp 7173-51-5
interconchemical_com---pro-con-hori.asp 64-17-5
interconchemical_com---pro-con-orange.asp N/A
interconchemical_com---pro-con-power-foam-plus.asp 1310-58-3 64-02-8 34590-94-8
interconchemical_com---pro-con-red.asp 1310-73-2 1310-58-3
interconchemical_com---pro-con-ruby.asp N/A
itwtranstech_com---additive_416.asp N/A
itwtranstech_com---adhesion_promo_fx_209.asp 1330-20-7
itwtranstech_com---adhesion_promo_ppo.asp 1330-20-7
itwtranstech_com---adhesive_agent_pp.asp 108-88-3 1330-20-7
itwtranstech_com---anti-corrosive_add.asp N/A
itwtranstech_com---anti_corrosion_spray.asp 64742-88-7 8042-47-5 34590-94-8 124-38-9
itwtranstech_com---anti_static_film_cleaner.asp 592-41-6 67-63-0 8030-30-6
itwtranstech_com---anti_static_gel.asp 98-82-8 95-63-6 108-67-8 1330-20-7 64742-95-6 107-98-2
itwtranstech_com---as-1.asp 64742-95-6 64742-47-8 1330-20-7 95-63-6 108-67-8 103-65-1
itwtranstech_com---bronze_paste_b75-b76-b77.asp 64742-95-6
itwtranstech_com---bronze_paste_b78.asp 64742-95-6
itwtranstech_com---bronze_paste_s291.asp 108-65-6 7429-90-5 7631-86-9
itwtranstech_com---can_thinner.asp 108-94-1 64742-95-6
itwtranstech_com---ch-fx209.asp 1330-20-7
itwtranstech_com---ch-hardener_bh.asp 100-41-4 822-06-0 1330-20-7 108-65-6
itwtranstech_com---ch-ink_uvhc.asp 3524-68-3 123-86-4 64742-95-6 75980-60-8 7727-43-7 7473-98-5
itwtranstech_com---ch-thinner_c.asp 123-86-4
itwtranstech_com---cleaner_ur3.asp 64742-95-6 123-42-2 123-86-4
itwtranstech_com---cliche_spray.asp 7397-62-8 108-94-1 64742-95-6 106-97-8 74-98-6
itwtranstech_com---dibasic_ester_sp.asp 1119-40-0 627-93-0 106-65-0
itwtranstech_com---elastifying_agent_nl.asp 61788-76-9
itwtranstech_com---express_iii_cliche.asp 79-06-1
itwtranstech_com---festo_oil.asp N/A
itwtranstech_com---filler_13.asp 112945-52-5
itwtranstech_com---flow_agent_vl.asp 64742-95-6
itwtranstech_com---flow_agent_vm2.asp 64742-95-6 107-98-2
itwtranstech_com---flow_agent__vm3.asp 64742-95-6
itwtranstech_com---fluorescent_inks.asp 989-38-8 50-00-0
itwtranstech_com---fuller_33.asp 7631-86-9
itwtranstech_com---fx_209_sp.asp N/A
itwtranstech_com---gold_bronze_powder_b76_00.asp N/A
itwtranstech_com---guideg-1.asp N/A
itwtranstech_com---h2_orange_polymer.asp 71-23-8
itwtranstech_com---hardener_bh.asp 26471-62-5 123-86-4
itwtranstech_com---hardener_bh_gl.asp 1760-24-3 64742-95-6
itwtranstech_com---hardener_bh_gl_02.asp 112-24-3 1760-24-3
itwtranstech_com---hardener_bh_n.asp 100-41-4 822-06-0 1330-20-7 108-65-6
itwtranstech_com---hardener_bh_n_00.asp 64742-95-6 108-65-6 1330-20-7
itwtranstech_com---hardener_bh_sp.asp 26471-62-5 123-86-4
itwtranstech_com---hardener_h1.asp 822-06-0 108-65-6 1330-20-7 100-41-4
itwtranstech_com---hardener_ht1.asp 64742-95-6 25551-13-7 96-29-7
itwtranstech_com---hardener_lmn.asp 100-41-4 108-65-6 26471-62-5 1330-20-7
itwtranstech_com---hardener_lmn_1.asp 108-65-6 822-06-0 1330-20-7 28182-81-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC