MATERIAL SAFETY DATA SHEET
1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Trade Name HARDENER LMN 1
414
MSDS Number
TRANS TECH AMERICA, INC.
Supplier
475 N. GARY AVENUE
CAROL STREAM, IL 60188 USA
Telephone Numbers - 24 Hour Emergency Assistance
Emergency (352)323-3500
Telephone Numbers - General Assistance
Information (630)752-4000
2 COMPOSITION / INFORMATION ON INGREDIENTS
Concentration
Ingredient Name CAS Number Exposure Limits / Health Hazards
1-METHOXY PROPYL ACETATE-2 108-65-6 16 % OSHA PELs: Not established.
ACGIH TLV: Not established.
OSHA/NIOSH IDLH TLV*: 275
mg/m3
HEXAMETHYLENEDIISOCYANATE 822-06-0 < 0.5 % OSHA PEL: 5ppm ACGIH TLV:
5ppm
XYLENE 1330-20-7 16 % OSHA TWA: 100ppm; OSHA STEL:
150ppm ACGIH TLV: TWA: 100
ppm STEL: 150 ppm NIOSH REL:
(Xylene) 100 ppm CL 200 ppm/10M
TWA:
POLYMERIC ISOCYANATE 28182-81-2 <1%
3 HAZARDS IDENTIFICATION
Signs & Symptoms of Short-Term (Acute) Exposure
Harmful by inhalation and in contact with skin.
Effects of Long-Term (Chronic) Exposure
Repeated skin contact may cause dermatitis.
4 FIRST AID MEASURES
Skin
Wash area thoroughly with soap and water and rinse.
Eye
Rinse immediately with plenty of water. See a physician for medical treatment.
Inhalation
Move to fresh air.
Printed On 31-Mar-03
ND = No Data NA = Not Applicable NI = Not Indicated
414 HARDENER LMN 1
Material Id Trade Name 1/ 4
Ingestion
Get medical attention.
Medical Conditions Aggravated by Exposure
Skin allergies.
5 FIRE FIGHTING MEASURES
Extinguishing Media
Foam, carbondioxide, waterspray unsuitable media: waterjet
Basic Fire Fighting Procedures
Full protective equipment including self contained breathing apparatus should be used. Foam in large quantities. Cool
endangered containers with water.
Unusual Fire & Explosion Hazards
Do not inhale fumes or decomposition products. Toxic gases may be generated by burning and by thermal decomposition.
100 F
Flash Point
C
AutoIgnition Temperature
1
Flammability Limits in Air, Lower, % by Volume
10.8
Flammability Limits in Air, Upper, % by Volume
6 ACCIDENTAL RELEASE MEASURES
Spill or Leak Procedure
Remove sources of ignition and ventilate polluted area. Take up remnants with liquid binding material like sand, etc. All
spills should be cleaned up immediately.
7 HANDLING & STORAGE
Handling
NI
Storage
Use only with skin and eye protection. Keep away from ignition sources. Avoid contact with skin, eyes and mucuous
membranes. Do not eat, drink or smoke during handling. Do not empty into drains.
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Eye Protection: Personal Protection Equipments (PPE)
We recommend the use of chemical resistant and splash-proof safety goggles.
Skin Protection: Personal Protection Equipments (PPE)
Chemical resistant gloves (rubber).
9 PHYSICAL & CHEMICAL PROPERTIES
Odor and Appearance
Pasteous matter
293 F
Boiling Point
1.15
Specific Gravity
NI
Melting Point
234 g/l
Percent Volatile
11 mbar
Vapor Pressure
NI
Evaporation Rate
Printed On 31-Mar-03
ND = No Data NA = Not Applicable NI = Not Indicated
414 HARDENER LMN 1
Material Id Trade Name 2/ 4
3-4
Vapor Density
Reactive with water, but insoluble.
Solubility In Water
10 STABILITY & REACTIVITY
Stability/Incompatibility
Stable Strong oxidizers.
Hazardous Reactions/Decomposition Products
Unknown
Hazardous Polymerization
Will not occur.
11 TOXICOLOGICAL INFORMATION
Routes of Exposure
Inhalation: fresh air supply. Skin contact: wash immediately with soap and water. Eye contact: rinse immediately with plenty
of water. See a physician for medical treatment. Ingestion: call medical assistance.
12 ECOLOGICAL INFORMATION
13 DISPOSAL CONSIDERATIONS
Waste Disposal
Follow federal, state and local regulations to dispose of or incinerate waste material.
14 TRANSPORT INFORMATION
Department of Transportation (DOT) Requirements:
General Transportation Information for Bulk Shipments
Proper Shipping Name Paint Related
Hazard Class 3 UN/NA Code 1263
Packaging Group Class III
Labels Required Flammable Liquid
15 REGULATORY INFORMATION
NFPA Ratings
Health Flammability Reactivity Special Hazards
HMIS Ratings
Health 2 Flammability 2 Reactivity 1 Personal Prot. Equip. B
Following ingredients of this product are listed in SARA313
SARA Listed Ingredient Name CAS Number Maximum %
XYLENES 1330-20-7
Listed on the following Regulatory List(s)
SARA 313
16 OTHER INFORMATION
Disclaimer
This information is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of
Trans Tech America, Inc. The data on this sheet applies only to the specific material designated herein. Trans Tech
America, Inc. assumes no legal responsibility for use of reliance upon this data.
Printed On 31-Mar-03
ND = No Data NA = Not Applicable NI = Not Indicated
414 HARDENER LMN 1
Material Id Trade Name 3/ 4
7/19/2000 2/26/1999
Replaces Sheet Dated
Completed On
TRANS TECH AMERICA, INC.
Completed By
Printed On 31-Mar-03
ND = No Data NA = Not Applicable NI = Not Indicated
414 HARDENER LMN 1
Material Id Trade Name 4/ 4
|