MATERIAL SAFETY DATA SHEET
1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Trade Name BRONZE PASTE S291
TRANS TECH AMERICA, INC.
Supplier
475 N. GARY AVENUE
CAROL STREAM, IL 60188 USA
Telephone Numbers - 24 Hour Emergency Assistance
Emergency (352)323-3500
Telephone Numbers - General Assistance
Information (630)752-4000
2 COMPOSITION / INFORMATION ON INGREDIENTS
Concentration
Ingredient Name CAS Number Exposure Limits / Health Hazards
PROPYLENE GLYCOL-1-METHYL 108-65-6 85 - 90 % OSHA PELs: N/A
ETHER-2-ACETATE ACGIH TLVs: N/A
TWA: N/A
ALUMINIUM 7429-90-5 5 - 10 % OSHA PELs: TWA: 15 mg/m3 (total
dust)
ACGIH TLVs: TWA: 10 mg/m3
AMORPHOUS SILICON DIOXIDE 7631-86-9 1-5% OSHA PELs: TWA: 6 mg/m3
ACGIH TLVs: 10 mg/m3
3 HAZARDS IDENTIFICATION
Potential Health Effects, Skin
Absorption may occur through skin.
Potential Health Effects, Eye
Irritating to eyes and mucous membranes.
Potential Health Effects, Inhalation
Prolonged or repeated inhalation may affect the nervous system and cause kidney and liver complaints.
Signs & Symptoms of Short-Term (Acute) Exposure
Irritant.
Possible effects in case of overexposure: skin resorption, irritations of eyes and mucous membranes; may effect liver,
kidneys and central nervous system. No health damages are to be expected if product is used appropriately, properly and
according to its designation.
4 FIRST AID MEASURES
Skin
Remove contaminated clothing and wash contact area with soap and water for 15 minutes. Wash contaminated clothing
thoroughly before reuse.
Eye
Flush with plenty of water. Take to a physician for medical treatment.
Printed On 1-Apr-03
ND = No Data NA = Not Applicable NI = Not Indicated
524 BRONZE PASTE S291
Material Id Trade Name 1/ 4
Inhalation
Remove to fresh air and keep warm. Call for a physician. If breathing is difficult: artificial respiration.
Ingestion
Do not induce vomiting. Seek medical advice immediately and produce the label or packaging.
5 FIRE FIGHTING MEASURES
Hazardous Combustion Products
Keep container tightly closed. Avoid heat, open flames, static electricity, electrical equipment and sparks. Closed
containers may explode when exposed to extreme heat.
Extinguishing Media
Chemical powder, sand.
Do not use water!!!!
Basic Fire Fighting Procedures
Fire fighters should wear full protective clothing including a self-contained breathing apparatus. Water spray may be used
to cool closed containers to prevent pressure buildup and possible autoignition or explosion when exposed to extreme heat.
Unusual Fire & Explosion Hazards
Closed containers may explode when exposed to extreme heat. Application to hot surfaces requires special precautions.
Water reacts with hot aluminium dust to form hydrogen, which tends to spread the fire.
45 潞C Method used: closed cup
Flash Point
315 潞C
AutoIgnition Temperature
1.5
Flammability Limits in Air, Lower, % by Volume
10.8
Flammability Limits in Air, Upper, % by Volume
6 ACCIDENTAL RELEASE MEASURES
Environmental Precautions
Dispose of or incinerate in accordance with local, state and federal regulations.
Spill or Leak Procedure
Remove sources of ignition. Ventilate area. Remove by using suitable inert liquid absorbing material, e.g. kieselgur.
7 HANDLING & STORAGE
Handling
FOR INDUSTRIAL USE ONLY! Use only in well ventilated areas. Keep away from all sources of ignition. Keep container
tightly closed. When using do not eat, drink or smoke. Avoid contact with skin and eyes. Do not empty into drains.
Storage
Store in a cool, dry area away from heat and incompatibles.
Ventilation
Use and store with adequate ventilation, sufficient to keep exposure below current PELs or TLV limits.
Local exhaust - yes
Mechanical Exhaust: Yes
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Eye Protection: Personal Protection Equipments (PPE)
Wear goggles if there is a likelihood of contact with eyes.
Skin Protection: Personal Protection Equipments (PPE)
Avoid skin contact with this material. Use appropriate protective gloves when handling. Wear a protective apron if
splashing or repeated contact is likely.
Printed On 1-Apr-03
ND = No Data NA = Not Applicable NI = Not Indicated
524 BRONZE PASTE S291
Material Id Trade Name 2/ 4
Respiratory Protection: Personal Protection Equipments (PPE)
If TLV or PEL of one hazardous component is exceeded, use approved respirators for organic vapors or approved self
contained breathing apparatus. Its use must be in compliance with all OSHA health and fit testing requirements. Use
respiratory protection when spray painting.
General
When using, do not eat, drink or smoke. Wash hands thoroughly before eating, drinking, smoking, or using toilet facilities.
Use re-greasing skin cream.
9 PHYSICAL & CHEMICAL PROPERTIES
Odor and Appearance
Silver paste. Characteristic odor.
145 潞C
Boiling Point
1.03
Specific Gravity
N/A
Melting Point
910 grams per liter
Percent Volatile
3
Vapor Pressure
>1
Vapor Density
appreciable(parts of solvents). Longer contact: formation of hydrogen.
Solubility In Water
10 STABILITY & REACTIVITY
Stability/Incompatibility
Stable Avoid high temperatures,
Hazardous Reactions/Decomposition Products
Materials to Avoid: Strong acids, alkalies or oxidizers, halagens, water. In case of fire, mainly DECOMPOSITION carbon
dioxide, carbon monoxide, soot and metal oxides may be formed.
Hazardous Polymerization
Will not occur.
11 TOXICOLOGICAL INFORMATION
Routes of Exposure
Inhalation, ingestion, skin and eye contact.
Carcinogenicity
NATIONAL TOXICOLOGY PROGRAM: No
I.A.R.C. MONOGRAPHS: 3 (Component Amorphous Silicon dioxide)
OSHA: No
12 ECOLOGICAL INFORMATION
13 DISPOSAL CONSIDERATIONS
Waste Disposal
Dispose of in accordance with all federal, state, and local regulations.
14 TRANSPORT INFORMATION
Department of Transportation (DOT) Requirements:
General Transportation Information for Bulk Shipments
Proper Shipping Name Paint Related Material
UN/NA Code 1263
Printed On 1-Apr-03
ND = No Data NA = Not Applicable NI = Not Indicated
524 BRONZE PASTE S291
Material Id Trade Name 3/ 4
15 REGULATORY INFORMATION
NFPA Ratings
Health Flammability Reactivity Special Hazards
HMIS Ratings
Health 1 Flammability 2 Reactivity 0 Personal Prot. Equip. C
16 OTHER INFORMATION
Disclaimer
The information contained herein is based on technical data believed to be reliable. However, since the conditions under
which this information may be applied are beyond our control, we can assume no liability for results of its application. This
information should be used only by a person having sufficient technical skill to make informed judgements regarding its
application.
Miscellaneous
The purpose of this addendum is to identify ingredients in this product that are chemical subject to the reporting
requirements of Section 313 of the Emergency Planning and Community Right-To-Know Act of 1986 and of 40 CFR 372.
We as a supplier are required to report this information to you on an annual basis with your first order of each product for
the year.
Listed below are the chemicals in this product that are subject to reporting under Section 313. The CAS number and weight
percent follow the compound name.
SECTION 313 CHEMICAL: Aluminium (fume or dust), CAS NO. 7429-90-5, 9.8%
4/3/2002 Replaces Sheet Dated
Completed On
TRANS TECH AMERICA, INC.
Completed By
Printed On 1-Apr-03
ND = No Data NA = Not Applicable NI = Not Indicated
524 BRONZE PASTE S291
Material Id Trade Name 4/ 4
|