February 26, 1991
Mr. Mark Wanthal
ARCOR Inc.
221 Libbey Industrial PKWY
E. Weymouth, MA 02189
Dear Mr. Wanthal:
This is in reply to your request for compound authorization received on January 23, 1991 for your
product S-16 Epoxy Protective Coating, Parts A & B.
This product is chemically acceptable as a coating for application to Structural surfaces or surfaces
where there is a possibility of incidental food contact in official establishments operating under the
Federal meat and poultry products inspection program. This letter does not authorize use of the
coating on any surface where there is direct or prolonged contact with food. Before food product may
be placed in the area where the material is being used, the area should be sufficiently free of odor
to prevent product contamination. As a safety precaution, smooth coatings should not be applied to
walking or standing surfaces in processing areas.
The final granting of authorization to use coatings on structural surfaces such as walls or ceilings,
or on equipment surfaces below the product zone, is the responsibility of the inspector in charge of
the official plant. Before applying the coating to equipment which will subsequently be installed in an
official plant, you must obtain clearance from the Equipment Standards and Review Branch, Meat and
Poultry Inspection Technical Services in Washington, DC 20250. Technical advice will be provided by
the Product Safety Branch upon request.
The above acceptance of this compound will not be indicated in the publication, 鈥淟ist of Proprietary
Substances and Nonfood Compounds.,, This letter acts as continuing authorization for its use under
the conditions stated above.
Acceptance of compounds by this Department is in no way to be construed as an endorsement of
the compounds or of any claims made for them. If any change is made in the labeling information or
formulation, the authorization for use in official plants becomes void immediately.
July 20, 1993
MR. MARK WANTHAL
ARCOR, INC.
221 LIBBEY INDUSTRIAL PARKWAY
E. WEYMOUTH, MA 02189
Re: Standard 61
Listed Product(s)
Official Listing
Dear Mr. Wanthal:
Enclosed is a copy of your revised official Listing. Please review the enclosed Listing for accuracy, including
footnotes, and report any problems as soon as possible. You are authorized to use the appropriate~NSF
Listing Mark (Mark) with the product(s) included on the enclosed Listing dated May 7, 1993.
It is your responsibility to comply with all requirements of the relevant NSF standards or criteria, the general
and program specific policies, and any other written agreements or contracts with NSF for Listing Services.
Unless otherwise authorized in writing the Mark is to be placed only on new products (manufactured after the
date of authorization) fully complying with requirements.
If you have any questions, please contact your NSF Service Representative.
NSF International (NSF)
OFFICIAL LISTING
This is a Certification by NSF that these products conform to the requirements of
NSF Standard 61 - Drinking Water System Components - Health Effects
This is your Official Listing as we have it on record at this time.
May 6, 1996 CC: 03
VICOR INTERNATIONAL
29 CAMELOT DRIVE
PLYMOUTH, MA 02360
Plant At: BALTIMORE, )W
PROTECTIVE (BARRIER) MATERIALS
Trade Designation Water Water Water
Contact Contact Contact
Size Restriction Temp Material
Coatings - Tank
Vicor EE-70 100% Solids Epoxy Protective Coating* >= 1000 gal. CLD 23 Epoxy
Vicor ES-71 Epoxy Protective Coating** >= 1500 gal. D. Hot Epoxy
* Colors: FX-408 Zinc Rich Primer: Gray; Vicor EE-70 Gray Number of Coats: 2-3
Sequence of Coats: One coat of FX-408 Zinc Rich Primer (optional); 1-2 coats of Vicor EE-70
Maximum Field Use Dry Film Thickness (in mils): FX-408: 2; Vicor EE-70: 16 Maximum Thinner: None
Recoat/Cure Time: FX-408: 24 hours; Vicor EE-70: 6 hours / 7 days
Special Comments: Use of FX-408 Zinc Rich Primer is optional
** Colors: FX-408 Gray, Vicor ES-7l White
Number of Coats: 1-3
Sequence of Coats: One coat Primer FX-408 (optional), one to two coats Topcoat Vicor ES-71
Maximum Field Use Dry Film Thickness (in mils): FX-408: 2; Vicor EX-71: 9 Maximum Thinner: None
Recoat/Cure Time: FX-408 24 hours; Vicor ES-71, 8 hours / 7 days
Additions cannot be made to
this listing without Prior Evaluation
and Acceptance by NSF
Issued by Certification Records
22080
NSF International (NSF)
OFFICIAL LISTING
This is a Certification by NSF that these products conform to the requirements of
NSF Standard 61 鈥? Drinking Water System Components 鈥? Health Effects
This Is your Official Listing as we have it on record at this time.
May 7, 1993 CC: 03
ARCOR, INC.
22i LXBBEY INDUSTRIAL PARKWAY
E. WEYMOUTH, MA 02189
Plant At: E. WEYMOUTH, MA
PROTECTIVE (BARRIER) MATERIALS
Trade Designation Water Water Water
Contact Contact Contact Monitor
Size Restriction Temp Material Code
Potable Water Tank Coating
Arcor S-16-PW* 1000 gal.& greater C. Hot Epoxy A
Potable Water Pipe Coatings
Arcor S-16-PW* 16鈥? pipe & greater C. Hot Epoxy A
* Listed colors are White, Blue and Fuchsia. Arcor S-16 PW White is applied as the first layer. Arcor S-l6 PW
Fuschia Is an optional intermediate coat. Arcor S-l6 PW Blue is applied as the final top coat. Maximum of three
coats at up to 15 wet mils per coat. Minimum recoat time: 12 hours. Minimum
Additions cannot be made to
this listing without Prior Evaluation
and Acceptance by NSF
03880
NSF International Test # 1
P.O. Box 1468
Ann Arbor, Michigan 48106 September 23, 1992
Tel: 313-769-8010
Fax: 313-769-0109
Customer 03880 Plant 03880
Arcor, Inc. Same
221 Libbey Industrial Parkway
E. Weymouth, MA 02189
Attn: Mr. Markl Wanthal
Document Control Code: PM00273
Collection Date: 7-May-1992 00:00:00.00
Description: Arcor, Inc. Arcor S-16
Lab Number: S20605305
Sampled May 7, 1992 Recieved June 2, 1992
Class Function: PMTL/PNT
Document Control Code: PM00273
Evaluation Dose: None
Listed or Requested: QQ
Testing Standard: 61
Parameter Result Units Entered
Results of Testing Follows
Description: Arcor, Inc. Arcor S-16 114, 8, 5 Bisphenol A
Lab Number: S20605306
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
640 640 sq. in 06-12-92
Amount of surface arae exposed
8.61 7.92 liters 06-12-92
Final volume of solution
n/a n/a 06-12-92
Dilution factor to produce NTU=1
<100 <100 ug/L 08-06-92
Bisphenol A
NSF International Test # 2
P.O. Box 1468
Ann Arbor, Michigan 48106 September 23, 1992
Tel: 313-769-8010
Fax: 313-769-0109
Customer 03880 Plant 03880
Arcor, Inc. Same
221 Libbey Industrial Parkway
E. Weymouth, MA 02189
Attn: Mr. Markl Wanthal
Document Control Code: PM00273
Collection Date: 7-May-1992 00:00:00.00
Description: Arcor, Inc. Arcor S-16
Lab Number: S20608411
Sampled May 7, 1992 Recieved June 2, 1992
Class Function: PMTL/PNT
Document Control Code: PM00273
Evaluation Dose: None
Listed or Requested: QQ
Testing Standard: 61
Parameter Result Units Entered
Results of Testing Follows
Description: Arcor, Inc. Arcor S-16 115, 8, (16hr.) Bisphenol A
Lab Number: S20608412
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
640 640 sq. in 06-24-92
Amount of surface arae exposed
7.91 8.21 liters 06-24-92
Final volume of solution
n/a n/a 06-24-92
Dilution factor to produce NTU=1
400 <100 ug/L 08-06-92
Bisphenol A
Description: Arcor, Inc. Arcor S-16 114, 8, 5 o, m, p Cresol
Lab Number: S20605310
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
320 230 sq. in 06-12-92
Amount of surface arae exposed
3.96 4.34 liters 06-12-92
Final volume of solution
n/a n/a 06-12-92
Dilution factor to produce NTU=1
Cresol, o, m, p
N.A. 09-23-92
Comment
Sample: Higher detction limit due to matrix interference.
o- Cresol <1000 <1 ug/L 09-14-92
m-Cresol <1000 <1 ug/L 09-14-92
p- Cresol <1000 <1 ug/L 09-14-92
Description: Arcor, Inc. Arcor S-16 114, 8, 5 1,3-Butadiene
Lab Number: S20605311
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
640 640 sq. in 06-12-92
Amount of surface arae exposed
8.61 7.92 liters 06-12-92
Final volume of solution
n/a n/a 06-12-92
Dilution factor to produce NTU=1
Butadiene, 1,3-By NSF Method
06-18-92
Comment
Sample: Sample S20605311 also had 1.0 ug/L tolune, 0.50 ug/L m-xylene, 0.50 ug/L
p-xylene, 1.0 ug/L 1, 2, 4-trimethylbenzene
Butadiene 1,3- <5.0 <5.0 ug/L 06-18-92
Description: Arcor, Inc. Arcor S-16 114, 8, 5 Acrylonitrile
Lab Number: S20605312
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
640 640 sq. in 06-12-92
Amount of surface arae exposed
8.61 7.92 liters 06-12-92
Final volume of solution
n/a n/a 06-12-92
Dilution factor to produce NTU=1
<1 <1 ug/L 06-19-92
Acrylonitrile
Description: Arcor, Inc. Arcor S-16 114, 8, 5 Benzyl Alcohol
Lab Number: S20605313
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
640 640 sq. in 06-12-92
Amount of surface arae exposed
8.61 7.92 liters 06-12-92
Final volume of solution
n/a n/a 06-12-92
Dilution factor to produce NTU=1
5000 <50 ug/L 07-17-92
Benzyl Alcohol
Description: Arcor, Inc. Arcor S-16 114, 8, 5 2, 4, 4-Trimethyl
hexamethylenediamine
Lab Number: S20605314
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
320 320 sq. in 06-12-92
Amount of surface arae exposed
3.96 4.34 liters 06-12-92
Final volume of solution
n/a n/a 06-12-92
Dilution factor to produce NTU=1
<25 <25 ug/L 07-17-92
Trimethel hexamethylenediamine, 2, 4, 4-
Description: Arcor, Inc. Arcor S-16 114, 8, 5 Phenolics
Lab Number: S20605315
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
640 640 sq. in 06-12-92
Amount of surface arae exposed
8.61 7.92 liters 06-12-92
Final volume of solution
n/a n/a 06-12-92
Dilution factor to produce NTU=1
<0.001 <0.001 ug/L 06-18-92
Phenolics
Description: Arcor, Inc. Arcor S-16 114, 8, 5 Reg Metals
Lab Number: S20605316
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
48 48 sq. in 06-12-92
Amount of surface arae exposed
0.78 0.81 liters 06-12-92
Final volume of solution
n/a n/a 06-12-92
Dilution factor to produce NTU=1
<0.001 <0.001 mg/L 06-15-92
Arsenic
<0.01 <0.01 mg/L 06-18-92
Barium
<0.0001 <0.0001 mg/L 06-16-92
Cadmium
<0.001 <0.001 mg/L 06-17-92
Chromium
<0.001 <0.001 mg/L 06-17-92
Lead
S20605316 Continued
Parameter Sample Control Units Entered
<0.0002 <0.0002 mg/L 06-19-92
Mercury
<0.001 <0.001 mg/L 06-15-92
Selenium
<0.0001 <0.0001 mg/L 06-18-92
Silver
Description: Arcor, Inc. Arcor S-16 114, 10, 5 Reg Metals
Lab Number: S20605317
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
48 48 sq. in 06-12-92
Amount of surface arae exposed
0.78 0.81 liters 06-12-92
Final volume of solution
n/a n/a 06-12-92
Dilution factor to produce NTU=1
<0.001 <0.001 mg/L 06-15-92
Arsenic
<0.01 <0.01 mg/L 06-18-92
Barium
<0.0001 <0.0001 mg/L 06-16-92
Cadmium
<0.001 <0.001 mg/L 06-17-92
Chromium
<0.004 <0.002 mg/L 06-17-92
Lead
<0.0002 <0.0002 mg/L 06-19-92
Mercury
<0.001 <0.001 mg/L 06-15-92
Selenium
<0.0001 <0.0001 mg/L 06-18-92
Silver
Description: Arcor, Inc. Arcor S-16 MDOD
Lab Number: S20605318
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Result Units Entered
Mean Dissolved Oxygen Difference
(MDOD) NSF Std. 61 61 mg/L 07-31-92
Mean Dissolved Oxygen Difference 0.58 per mL 07-31-92
Total Pseudomonas 8 per mL 07-31-92
Total Coliform <1
Description: Arcor, Inc. Arcor S-16 114, 8, 5 TKN
Lab Number: S20605319
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
640 640 sq. in 06-12-92
Amount of surface arae exposed
8.01 7.92 liters 06-12-92
Final volume of solution
n/a n/a 06-12-92
Dilution factor to produce NTU=1
0.15 0.05 mg/L N 07-08-92
Nitrogen, Total kjeldahal
Description: Arcor, Inc. Arcor S-16 115, 10, (16 hr.) Reg Metals
Lab Number: S20608430
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
48 48 sq. in 06-24-92
Amount of surface arae exposed
0.76 0.79 liters 06-24-92
Final volume of solution
n/a n/a 06-24-92
Dilution factor to produce NTU=1
<0.001 <0.001 mg/L 06-26-92
Arsenic
<0.01 <0.01 mg/L 06-26-92
Barium
<0.0001 <0.0001 mg/L 06-26-92
Cadmium
<0.001 <0.001 mg/L 06-26-92
Chromium
<0.001 <0.001 mg/L 06-26-92
Lead
<0.0002 <0.0002 mg/L 07-08-92
Mercury
<0.001 <0.001 mg/L 06-26-92
Selenium
<0.0001 <0.0001 mg/L 06-26-92
Silver
Description: Arcor, Inc. Arcor S-16 114, 8, 5 TKN
Lab Number: S20605319
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
320 320 sq. in 06-24-92
Amount of surface arae exposed
3.97 4.16 liters 06-24-92
Final volume of solution
n/a n/a 06-24-92
Dilution factor to produce NTU=1
0.36 0.07 mg/L N 07-02-92
Nitrogen, Total kjeldahal
All work performed at NSF International, Ann Arbor, Michigan , USA
References to Testing Procedures: NSF Reference
1,3-Dichoro-2-Propanol -0220423
3-Chloro-1,2-Propanediol -0220422
Acrylonitrile -022063603
Additives sample preparation information -E8ADINFO
Arsenic -I3AS021
Barium -I3BA031
Benzyl Alcohol -0220445
Bisphenol A -031009NIOS
Butidiene, 1,3-By NSF Method -031025NSF
Cadmium -I3CD021
Chromium -I3CR021
Cresol, o, m, p -0220446
Epichlorohydrin, by EPA Method 502.2 -032069502
Formaldehyde -030100NSF
Lead -I3PB021
Mean Dissolved Oxygen Difference (MDOD) NSF Std. 61 -M009
Mercury -I3HG050
Nitrogen, Total kjeldahi -I26008351
Phenolics -I280012420
Phenol Glycidyl Ether, p-tert-Butyl -032078NSF
Selenium -I3SE021
Silver -I3AG021
Trimethyl hexamethylenediamine, 2,4,4- -038000NSF
Description: Arcor, Inc. Arcor S-16 115, 8, (16 hr.) Epichlorohydrin +
By-Products
Lab Number: S20608413
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
640 640 sq. in 06-24-92
Amount of surface arae exposed
7.91 8.21 liters 06-24-92
Final volume of solution
n/a n/a 06-24-92
Dilution factor to produce NTU=1
<100 <100 ug/L 07-08-92
1,3-Dichloro-2-Propanol
<5.0 <5.0 ug/L 07-07-92
Epichlorohydrin
<2000 <2000 ug/L 07-09-92
3-Chloro-1,2-Propanediol
Description: Arcor, Inc. Arcor S-16 115, 8, (16 hr.) p-tert-Butyl Phenyl
Glycidyl Ether
Lab Number: S20608414
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
640 640 sq. in 06-24-92
Amount of surface arae exposed
7.91 8.21 liters 06-24-92
Final volume of solution
n/a n/a 06-24-92
Dilution factor to produce NTU=1
<5.0 <5.0 ug/L 07-16-92
Phenyl Glycidyl Ether, p-tert-Butyl
Description: Arcor, Inc. Arcor S-16 115, 8, (16 hr.) Formaldehyde
Lab Number: S20608415
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
640 640 sq. in 06-24-92
Amount of surface arae exposed
7.91 8.21 liters 06-24-92
Final volume of solution
n/a n/a 06-24-92
Dilution factor to produce NTU=1
<0.01 <0.03 mg/L 07-07-92
Formaldehyde
Description: Arcor, Inc. Arcor S-16 115, 8, (16 hr.) o,m,p Cresol
Lab Number: S20608416
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
320 320 sq. in 06-24-92
Amount of surface arae exposed
3.97 4.16 liters 06-24-92
Final volume of solution
n/a n/a 06-24-92
Dilution factor to produce NTU=1
S20608416 Continued
Parameter Sample Control Units Entered
Cresol, o,m,p
N.A. 09-23-92
Comment
Sample: Higher detction limit duu to matrix interference.
o- Cresol <1000 <1 ug/L 09-14-92
m-Cresol <1000 <1 ug/L 09-14-92
p- Cresol <1000 <1 ug/L 09-14-92
Description: Arcor, Inc. Arcor S-16 115, 8, (16 hr.) 1,3-Butadiene
Lab Number: S20608417
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
640 640 sq. in 06-24-92
Amount of surface arae exposed
7.91 8.21 liters 06-24-92
Final volume of solution
n/a n/a 06-24-92
Dilution factor to produce NTU=1
Butadiene, 1,3-By NSF Method
07-07-92
Comment
Sample: Sample S20608417 also had 2.0 ugL Chloroform, 0.60 ug/L Ethylbenzene, 0.70 ug/L
m-xylene, 0.70 ug/L p-xylene, 6.0 ug/L 1, 2, 4-trimethylbenzene.
Control: Sample C20623779 also had 9.0 ug/L Bromodichloromethane, 1.0 ug/L 2-Chlorethyl
vinyl ether, 0.8 ug/L Chlorodibromomethane and approximately 51 ug/L Chloroform.
Butadiene 1,3- <5.0 <5.0 ug/L 07-07-92
Description: Arcor, Inc. Arcor S-16 115, 8, (16 hr.) Acrylonitrile
Lab Number: S20608418
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
640 640 sq. in 06-24-92
Amount of surface arae exposed
7.91 8.21 liters 06-24-92
Final volume of solution
n/a n/a 06-24-92
Dilution factor to produce NTU=1
<1 <1 ug/L 06-26-92
Acrylonitrile
Description: Arcor, Inc. Arcor S-16 115, 8, (16 hr.) Benzyl Alcohol
Lab Number: S20608419
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
640 640 sq. in 06-24-92
Amount of surface arae exposed
7.91 8.21 liters 06-25-92
Final volume of solution
n/a n/a 06-24-92
Dilution factor to produce NTU=1
1800 <50 ug/L 09-23-92
Benzyl Alochol
Description: Arcor, Inc. Arcor S-16 115, 8, (16 hr.) 2, 4, 4-Trimethyl
hexamethylenediamine
Lab Number: S20608420
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
320 320 sq. in 06-24-92
Amount of surface arae exposed
3.97 4.16 liters 06-24-92
Final volume of solution
n/a n/a 06-24-92
Dilution factor to produce NTU=1
<25 <25 ug/L 07-17-92
Trimethel hexamethylenediamine, 2, 4, 4-
Description: Arcor, Inc. Arcor S-16 115, 8, (16 hr.) Phenolics
Lab Number: S206058425
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
640 640 sq. in 06-24-92
Amount of surface arae exposed
7.91 8.21 liters 06-24-92
Final volume of solution
n/a n/a 06-24-92
Dilution factor to produce NTU=1
<0.001 <0.001 mg/L 07-01-92
Phenolics
Description: Arcor, Inc. Arcor S-16 115, 5, (16 hr.) Reg Metals
Lab Number: S20608426
Sampled May 7, 1992 Recieved: June 2, 1992
Parameter Sample Control Units Entered
Additives sample preparation information
48 48 sq. in 06-24-92
Amount of surface arae exposed
0.76 0.79 liters 06-24-92
Final volume of solution
n/a n/a 06-24-92
Dilution factor to produce NTU=1
<0.001 <0.001 mg/L 06-26-92
Arsenic
<0.01 <0.01 mg/L 06-26-92
Barium
<0.0001 <0.0001 mg/L 06-26-92
Cadmium
<0.001 <0.001 mg/L 06-26-92
Chromium
<0.001 <0.001 mg/L 06-26-92
Lead
<0.0002 <0.0002 mg/L 07-08-92
Mercury
<0.001 <0.001 mg/L 06-26-92
Selenium
<0.0001 <0.0001 mg/L 06-26-92
Silver
All work performed at NSF International, Ann Arbor, Michigan , USA
References to Testing Procedures: NSF Reference
1,3-Dichoro-2-Propanol -0220423
3-Chloro-1,2-Propanediol -0220422
Acrylonitrile -022063603
Additives sample preparation information -E8ADINFO
Arsenic -I3AS021
Barium -I3BA031
Benzyl Alcohol -0220445
Bisphenol A -031009NIOS
Butidiene, 1,3-By NSF Method -031025NSF
Cadmium -I3CD021
Chromium -I3CR021
Cresol, o, m, p -0220446
Epichlorohydrin -032069502
Formaldehyde -030100NSF
Lead -I3PB021
Mercury -I3HG050
Nitrogen, Total kjeldahi -I26008351
Phenolics -I280012420
Phenol Glycidyl Ether, p-tert-Butyl -032078NSF
Selenium -I3SE021
Silver -IAG021
Trimethyl hexamethylenediamine, 2,4,4- -038000NSF
NSF International Test # 3
P.O. Box 1468
Ann Arbor, Michigan 48106 March 13, 1995
Tel: 313-769-8010
Fax: 313-769-0109
Customer 03880 Plant 03880
Arcor, Inc. Same
221 Libbey Industrial Parkway
E. Weymouth, MA 02189
Attn: Mr. Markl Wanthal
Collection Date: 7-May-1992 00:00:00.00
Tracking ID: PM00273
Region: 03
Description: Arcor, Inc. S-16pw
Lab Number: S30608048
Sampled: Jan 25, 1993 Recieved: Jan 27, 1993
Class Function: PMTL/PNT
Tracking ID: PM00273
Evaluation Dose: None
Listed or Retest: A1
Testing Standard: 61
Parameter Result Units Entered
Results of Testing Follows
Description: Arcor, Inc. S-16pw 189,1,82C, pH 8, Non-Cl
Lab Number: S30608050
Sampled: Jan 25, 1993 Recieved: Jan 27, 1993
Parameter Sample Control Units Entered
Additives sample preparation information
320 320 sq. in 08-02-93
Amount of surface area exposed
4.95 5.10 liters 08-02-93
Final volume of solution
0.4 <0.1 mg/L N 07-12-93
Nitrogen, Total Kjeldahl
Description: Arcor, Inc. S-16pw 189, 2, 82C, pH 8, Non-Cl
Lab Number: S30608051
Sampled: Jan 25, 1993 Recieved: Jan 27, 1993
Parameter Sample Control Units Entered
Additives sample preparation information
320 320 sq. in 08-02-93
Amount of surface area exposed
4.95 5.10 liters 08-02-93
Final volume of solution
0.1 <0.1 mg/L N 08-11-93
Nitrogen, Total Kjeldahl
Description: Arcor, Inc. S-16pw 189, 9, 82C, pH 8, Non-Cl
Lab Number: S30608053
Sampled: Jan 25, 1993 Recieved: Jan 27, 1993
Parameter Sample Control Units Entered
Additives sample preparation information
320 320 sq. in 08-02-93
Amount of surface area exposed
4.95 5.10 liters 08-02-93
Final volume of solution
0.2 <0.1 mg/L N 07-12-93
Nitrogen, Total Kjeldahl
Description: Arcor, Inc. S-16pw 189, 16, 82C, pH 8, Non-Cl
Lab Number: S30608054
Sampled: Jan 25, 1993 Recieved: Jan 27, 1993
Parameter Sample Control Units Entered
Additives sample preparation information
320 320 sq. in 08-02-93
Amount of surface area exposed
4.95 5.10 liters 08-02-93
Final volume of solution
0.1 <0.1 mg/L N 08-11-93
Nitrogen, Total Kjeldahl
Description: Arcor, Inc. S-16pw 189, 23, 82C, pH 8, Non-Cl
Lab Number: S30608055
Sampled: Jan 25, 1993 Recieved: Jan 27, 1993
Parameter Sample Control Units Entered
Additives sample preparation information
320 320 sq. in 08-02-93
Amount of surface area exposed
4.95 5.10 liters 08-02-93
Final volume of solution
0.1 <0.1 mg/L N 08-11-93
Nitrogen, Total Kjeldahl
Description: Arcor, Inc. S-16pw 189, 30, 82C, pH 8, Non-Cl
Lab Number: S30608056
Sampled: Jan 25, 1993 Recieved: Jan 27, 1993
Parameter Sample Control Units Entered
Additives sample preparation information
320 320 sq. in 08-02-93
Amount of surface area exposed
4.95 5.10 liters 08-02-93
Final volume of solution
0.1 <0.1 mg/L N 08-11-93
Nitrogen, Total Kjeldahl
Description: Arcor, Inc. S-16pw 189, 37, 82C, pH 8, Non-Cl
Lab Number: S30608057
Sampled: Jan 25, 1993 Recieved: Jan 27, 1993
Parameter Sample Control Units Entered
Additives sample preparation information
320 320 sq. in 08-02-93
Amount of surface area exposed
4.95 5.10 liters 08-02-93
Final volume of solution
<0.1 <0.1 mg/L 08-11-93
Nitrogen, Total Kjeldahl
Description: Arcor, Inc. S-16pw 189, 9, 82C, pH 5, 2 ppm Cl
Lab Number: S30608058
Sampled: Jan 25, 1993 Recieved: Jan 27, 1993
Parameter Sample Control Units Entered
Additives sample preparation information
45 45 sq. in 08-02-93
Amount of surface arae exposed
0.780 0.780 liters 08-02-93
Final volume of solution
<0.002 <0.002 mg/L 07-09-93
Antimony
<0.001 <0.001 mg/L 07-09-93
Arsenic
<0.01 <0.01 mg/L 07-06-93
Barium
<0.0004 <0.0004 mg/L 07-09-93
Beryllium
<0.0001 <0.0001 mg/L 07-08-93
Cadmium
<0.001 <0.001 mg/L 07-06-93
Chromium
<0.01 <0.01 mg/L 07-02-93
Copper
<0.001 <0.001 mg/L 07-12-93
Lead
<0.0002 <0.0002 mg/L 07-06-93
Mercury
<0.01 <0.01 mg/L 07-02-93
Nickel
<0.001 <0.001 mg/L 07-09-93
Selenium
<0.0003 <0.0003 mg/L 07-02-93
Thallium
Description: Arcor, Inc. S-16pw 189, 9, 82C, pH 10, 2m ppm Cl
Lab Number: S30608059
Sampled: Jan 25, 1993 Recieved: Jan 27, 1993
Parameter Sample Control Units Entered
Additives sample preparation information
45 45 sq. in 08-02-93
Amount of surface arae exposed
0.780 0.780 liters 08-02-93
Final volume of solution
<0.002 <0.002 mg/L 07-09-93
Antimony
<0.001 <0.001 mg/L 07-09-93
Arsenic
<0.13 <0.01 mg/L 07-06-93
Barium
<0.0004 <0.0004 mg/L 07-09-93
Beryllium
<0.0001 <0.0001 mg/L 07-08-93
Cadmium
<0.001 <0.001 mg/L 07-06-93
Chromium
<0.01 <0.01 mg/L 07-02-93
Copper
<0.002 <0.001 mg/L 07-12-93
Lead
<0.0002 <0.0002 mg/L 07-06-93
Mercury
<0.01 <0.01 mg/L 07-02-93
Nickel
<0.001 <0.001 mg/L 07-09-93
Selenium
<0.0003 <0.0003 mg/L 07-02-93
Thallium
Description: Arcor, Inc. S-16pw 189, 9, 82C, pH 8, Non-Cl
Lab Number: S30608060
Sampled: Jan 25, 1993 Recieved: Jan 27, 1993
Parameter Sample Control Units Entered
Additives sample preparation information
320 320 sq. in 08-02-93
Amount of surface area exposed
4.95 4.95 liters 08-02-93
Final volume of solution
100 <25 ug/L 08-16-93
Bisphenol A
Description: Arcor, Inc. S-16pw 189, 9, 23C, pH 8, Non-Cl
Lab Number: S30608061
Sampled: Jan 25, 1993 Recieved: Jan 27, 1993
Parameter Sample Control Units Entered
Additives sample preparation information
640 640 sq. in 08-02-93
Amount of surface arae exposed
8.61 7.92 liters 08-02-93
Final volume of solution
n/a n/a 07-07-93
Dilution factor to produce NTU=1
Epichlorohydrin, by EPS Method 502.02
07-19-93
Comment
Sample: Sample S30608061 also had 1.6 ug/L toluene, 0.6 ug/L m-xylene, and 0.6 ug/L p-x-
ylene
Epichlorohydrin <5.0 <5.0 ug/L 0719-93
All work performed at NSF International, Ann Arbor, Michigan , USA
References to Testing Procedures: NSF Reference
Additives sample preparation information -E8ADINFO
Antimony -I3SB021
Arsenic -I3AS021
Barium -I3BA031
Beryllium -I3BE021
Bisphenol A -040001NSF
Cadmium -I3CD021
Chromium -I3CR021
Copper -I3CU031
Epichlorohydrin, by EPA Method 502.2 -032069502
Lead -I3PB021
Mercury -I3HG050
Nickel -I3NI031
Nitrogen, Total kjeldahi -I26008351
Phenolics -I28012420
Selenium -I3SE021
Thallium -I3TL021
|