ARCOR庐
庐
EPOXY TECHNOLOGIES
PRODUCT DATA SHEET
ARCOR鈩? Spraythane REVISED 09/18/01
GENERIC TYPE: AMINE CURED 100% SOLIDS EPOXY / URETHANE TOPCOAT.
DESCRIPTION AND RECOMMENDED USES: ARCOR鈩? SPRAYTHANE is a high elongation, elastomeric,
hybridized epoxy/urethane. It is designed as a high resilience, high tear resistant, high impact resistant coating
that is ideal to combat cavitation and abrasion, and it is completely compatible with epoxy coatings. The urethane
aspect delivers a tough, flexible resilience while the epoxy aspect provides improved water and chemical resis-
tance and shelf stability. ARCOR鈩? SPRAYTHANE鈥檚 epoxy reactivity eliminates the moisture sensitivity and toxic-
ity associated with traditional urethanes.
FOR INDUSTRIAL USE ONLY
SPECIFICATION DATA
TEMPERATURE: Immersion service SOLIDS BY VOLUME: 100%
Max.150潞F (66潞C); Spike to 180潞F (3 hrs)
VISCOSITY: 90,000-130,000 cps
POT LIFE: 55 MIN/Gal @ 72潞F
CHEMICAL RESISTANCE:
Water: Excellent
Alkalies: Good MIX RATIO: 2:1 by Volume (Base:Activator)
Inorganic Acids: Fair 100 gm: 52.2 gm by Weight
Organic Acids: Fair
Organic Solvents: Poor
COLOR: Grey
FILM THICKNESS: 20 mils(.51 mm)/coat
Immersion 1-2 coats. SHELF LIFE: 5 Years at 55-95潞F (13-35潞C)
ABRASION: Excellent
COVERAGE: 27-80 ft2(2.5-7.5 M2)/gal(theoretical)
Hardness Shore A: 80 A
Impact Resistance, Direct: 400 in-lbs
WEIGHT PER GALLON: 10.8 lbs (4.9 KG)
FLEXIBILITY: Excellent
Elongation 300%
ORDER INFORMATION: To place orders
and/or obtain pricing information contact:
APPLICATIONS: Cavitation Protection, Abrasion
Protection, Concrete Flooring & Work Areas,
ARCOR Epoxy Inc.
Manways.
PO Box 273
South Dennis, MA 02660
TEL: 800-878-9593; FAX: 888-878-9593
Manufacturer makes no warranty either expressed or implied including warranties of merchantability or fitness for a particular purpose for this product. Under no circumstanc-
es will the manufacturer be liable for incidental, consequential or other damages, breach of warranty, strict liability, or any other theory arising out of use of this product.
PO Box 273, South Dennis, MA 02660 Tel/Fax: 800-878-9593 /508-385-5798 Email: arcor@ArcorEpoxy.com www.ArcorEpoxy.com
ARCOR庐
庐
EPOXY TECHNOLOGIES
APPLICATION SHEET REVISED 09/18/01
ARCOR鈩? Spraythane
SEE MATERIAL SAFETY DATA SHEET BEFORE HANDLING THIS PRODUCT
SURFACE PREPARATION:
Steel surfaces are to be abrasive blasted with chloride free abrasive. Exterior applications to SSPC SP-6 Commercial
gray metal finish. Immersion applications to SSPC SP-5 White metal. Grind flat all burrs, weld seams, radius sharp
edges. Fresh blasted surfaces to be primed with ARCOR鈩? S-30 Prime.
Concrete surfaces should be degreased if oil and grease contamination is present. Degreased surface shall be high
pressure washed, acid etched and high pressure washed again so surface is clean and free of all grease and oils and
surface laitance. Existing coatings should be abrasive blasted to clean concrete. Prime with ARCOR鈩? EE-70, EE-79 or
ARCOR鈩? EE-10.
MIXING:
Thoroughly mix Activator into Base with mixing stick or drill with low speed mixing blade, thoroughly scrape sides and bot-
tom. Mix by volume 2 part Base to 1 part activator, by weight 100 gm Base to 52.2 gm activator.
THINNING: Never thin.
APPLICATION:
By brush use medium to stiff bristle of sufficient quality that bristles do not pull out and stick in coating. Trim or
tape to <1鈥? nap.
Roller use good quality 1/8鈥? nap.
Plural Spray use .023-.028 tip, 3,000-3,500 PSI, Heat to 130潞F Base, 110潞F Activator.
Airless Spray use : Not Recommended
Conventional Spray: Not Recommended
All spray equipment should employ traps to prevent water and oil from contaminating coating and screens to
prevent particulate contamination.
APPLICATION TEMPERATURE:
Material: Keep between 55 to 95潞F(13 to 35潞C). Substrate : Keep between 45 to 105潞F(7 to 40潞C). The difference in tem-
perature of the substrate and the coating should never exceed 10潞F (5潞C). Substrate shall be a minimum of 5潞F(3潞C)
above dew point.
OVERCOAT / CURE TIME:
Recoat between 6 and 12 hours at 77潞F (25潞C).
Full cure before immersion 72 hours at 77潞F. Force Cure: 12 hours at 120潞F (49潞C).
CLEAN UP: M.E.K. or similar
WARNING: Base contains epoxy resin. Activator contains alkaline amines, a strong sensitizer. May cause skin irritation, sensitization or other allergic responses. Use with
good ventilation, particularly if heated or sprayed. Prevent all contact with skin or eyes. Wear protective clothing, goggles, gloves or barrier creams. Keep containers closed
when not in use. Wash thoroughly after handling. In case of skin contact immediately wash with soap and water. In case of eye contact, flush with water for 15 minutes. If irri-
tation persists seek medical attention.
PO Box 273, South Dennis, MA 02660 Tel/Fax: 800-878-9593 /508-385-5798 Email: arcor@ArcorEpoxy.com www.ArcorEpoxy.com
|