WearGuard鈩? epoxy systems are used to restore and protect metals in a wide variety of high-service industrial
applications.
WearGuard鈩? Systems have become a valuable resource for maintenance managers by extending the service
life of high wear components.
ARCOR庐 Rebuid and Protect Hi-Wear Systems
WearGuard鈩? Systems
EE-94 鈥? 100% Solids Epoxies
Our novalic epoxy past grade heavily filled with multi-
鈥? Superior resistance to a wide
mesh size ceramic beads for a deuse hi-wear rebuild.
The use of Kevlar庐 fibers impact exceptional impact
variety of acids & caustics
resistance. Vertical Hang to 2000 mils.
鈥? High build allows for one coat
EE-11
A multi-purpose ceramic filled coating suited for aggres-
coverage to 2,000 mils
sive water acid and caustic service. Excellent at elevated
鈥? Excellent Adhesion without Primer
temperatures to 300潞F immersion. High abrasion resis-
tance. EE-11 has excellent flexibility.
鈥? Impact resistant
EE-95
鈥? High Compressive Strength
Rebuilding material with superior adhesion to metals &
concrete. Ideally suited for filling pits and voids on verti-
鈥? Superior Abrasion & cavitation
cals and overhead. Can be applied to 500 mils without
rsistance
slump. Service temperature to 450潞F.
EE-99 鈥? Cure for service in 1-12 hrs
A moisture insensitive epoxy adhesive designed as an
鈥? Temperture limits to 600潞F
emergency repair or bonding material for metals, glass,
concrete or wood. Sets in six minutes and can be put
into service within one hour.
WearGuard鈩? toughened and elastomer-modified
SPRAYTHANE epoxy systems protect and restore metal and rubber
A Sprayable hybrid epoxy-urethane, highly resilient, tear components in most demanding corrosion/erosion appli-
resistant and impact resistant coating to combat cavita- cations. Their highest value is in impact/abrasion and
tion and abrasion. Excellent for large circulation and moderate cavitation.
irrigation pumps.
EE-92
A high functionality epoxy Novolac rebuild material formu-
lated for the highest abrasion resistance. Excellent resis-
tance to a wide array of acids, solvents and alkalis. Now
formulated with Kevlar庐 for even higher impact, flexural
and thermal resistance.
EE-97
A machine toolable epoxy Novolac rebuilding compound.
It shares the same high end chemical and temperature
resistance as EE-92. Easy to mix and apply for excellent
adhesion. Tool with carbide bits.
Rotary Vacuum Filter
WG-8525 Cast into these slurry pump wear plates
Cavitation Resistance / EE-92 & EE-11 to avoid weld distoration/embrittlement.
HSR[ \ WFKQRO
H RJL VW
HP
ARCOR庐 ARCOR庐 can provide the Materials, Application
Po. Box 273 Services and Complete Quality Control needed to
South Dennis MA, 02660 USA complete your WearGuard鈩? project with com-
Tel: 800-878-9593 Fax: 888-878-9593 plete Warranty Protection
E-mail: arcor@arcorepoxy.com
www.arcorepoxy.com Call your ARCOR庐 Representative Today.
WG-8526 paste and WG-8518 liquid restored WG-8526 Paste rebuild/protect cooling tower fan blade lead-
and smoothed this Canadian 20MW hydro unit ing edges. Tested/Approved by one of the largest manufactors
intake. Unit runs 3/4% more efficiently, resulting of such equipment. Installed cost per 9-blade fan set=$2, 900.
in a 2-year payback on total installed cost. Cost of replacement unit if 鈥榳recked鈥?=$32, 000
WG-8506 Troweled liner in morris mine dewater-
ing pump. Outlasts original 鈥榥i-hard鈥? casing.
WG-8526 WG-8518 liquid rebuilt and smoothed this effluent
pump, resulting in 5% + increase in efficiency.
WG-8506 and WG-8518 replacing vulcanized rubber coating
which was torn through. Installed cost=$900. Replacement
rubber=$2, 200
EE-94 Rebuilt these badly coal-cut
distributer noses in place.
|