鈥prayable 100% Solids Novolac Epoxies; 鈥igh Build To 100 Mils / Coat; 鈥hemical Resistant; 鈥mpact
Resistant 鈥lex Resistant; 鈥brasion Resistant; 鈥arbon Steel; Stainless; Concrete; Aluminum; 鈥ure
For Service In 12 Hrs; 鈥einforced Composite Systems
ARCOR庐 Tough Epoxy Protection...Quality Spray Application
TankGuard鈩? Systems
EE-95
EE-11
Rebuilding material for metals in immersion service. Ideally
A sprayable multipurpose coating suited for aggressive
suited as a restoration or cladding material for corrosion and
acid and caustic service. Excellent at elevated tem-
abrasion protection in highly aggressive environments. Can
peratures to 300F immersion. High abrasion resistance.
be applied to 500 mils without slump.
Excellent flexibility makes EE-11 ideal for large tank appli-
cations.
EE-10
S-16
A high functionality epoxy Novolac coating especially
A sprayable epoxy coating that meets the NSF Std. 61 for
suited for aggressive acid environments. EE-10 is suit-
Potable Water linings. Also complies with USDA and FDA
able as a primer as well as a topcoat. Excellent against
standards for incidental food contact. Performs in all water
98% Sulfuric Acid.
environments, mild acids & caustics.
EE-80
ARCTHANE Very low viscosity epoxy penetrating pre-primer. Suited for
A high elongation, elastomeric, hybridized epoxy/
use on large surface areas to hold the blast until the coat-
urethane. Ideally suited for expansion joint sealing and
ing system can applied, up to 7 days. Increases adhesion
weld repair, and it is completely compatible with epoxy
to surfaces which cannot be blasted to an SP5.
coatings.
TankGuard鈩? protective epoxy systems from ARCOR庐 offer the ultimate in performance for a
wide range of tank applications.
NEW Multi 3.6 Epoxy Systems
For highly Agressive areas including, Nitrc Acid, Hydrochloric
Acid, Methanol, Glacial Acitic Acid, Methylene Chloride.
EE-101
Designed for use in the most aggressive chemical and high temper-
ature environments typically thought beyond the abilities of epoxies.
EE-111
Suitable for immersion and non-immersion service, particularly in
aggressive chemical with elevated temperatures and high abrasion.
EE-121
Designed specifically for as a Methanol resistant coating, produces
a tough, chemical resistant coating.
EE-951
Designed particularly as a rebuilding material for metals in highly
aggressive chemical and temperature immersion service.
A RC O R 庐 epox y t echn ol ogies t m
ARCOR庐
ARCOR庐 can provide the Materials, Application
Po. Box 273
Services and Complete Quality Control needed to
South Dennis MA, 02660 USA
complete your TankGuard鈩? project with full
Tel: 800-878-9593 Fax: 888-878-9593
Warranty protection.
E-mail: arcor@arcorepoxy.com
www.arcorepoxy.com
Call your ARCOR庐 Representative
鈥? FGD Recycle 鈥? Crude Oil
鈥? Alcohol 鈥? Acid & Caustic
鈥? Potable Water 鈥? Wastewater
鈥? Neutralization
鈥? Carbon Filter
鈥? Fuel Oil / Gasoline 鈥? Demin Water
Hydro-Bin: Highly abrasive environment coupled with flex-
ural and thermal stress. A 120 mil EE-95 / EE-11 system
provided 12 years of performance. It took a 40,000 psi
HydroBlast to remove it.
Aluminum Tank Floor
Concrete Potable Water Tank
Spray Application
Solvent-free spray application of
ARCOR庐 100%-solids epoxy reduces
installation time and labor costs. At right,
a large wastewater treatment tank at
a chemical processing plant received
fiberglass matte reinforcement with
epoxy primer and overcoat.
|