MATERIAL SAFETY DATA SHEET
HEAVY DUTY ADHESIVE SPRAY
PRODUCT INFORMATION
Distributor鈥檚 name: Allied Rubber & Gasket Company
2610 Commerce Way
Vista, Ca 92081
In case of emergency: Contact your local poison control center
For information call: (800) 854-1015
Date prepared: 1/23/2007
Product name: Heavy Duty Adhesive Spray
This MSDS complies with OSHA'S Hazard Communication Standard 29 CFR 1910.1200
and OSHA Form 174
IDENTITY AND MANUFACTURER'S INFORMATION
NFPA Rating: Health-2; Flammability-3; Reactivity-0; Special-0 HMIS Rating: Health-2; Flammability-3;
Reactivity-0; Personal Protection-B
Manufacturer's Name: AMREP, INC.
Address: 990 Industrial Park Drive
Marietta, GA 30062
DOT Hazard Classification: ORM-D
Identity (trade name as used on label):
MISTY HEAVY DUTY ADHESIVE SPRAY
Information Calls: (770)422-2071
EMERGENCY RESPONSE NUMBER: 1(800)255-3924
NOTICE: JUDGEMENT BASED ON INDIRECT TEST DATA
SECTION 1 - MATERIAL IDENTIFICATION AND INFORMATION
COMPONENTS-CHEMICAL NAMES AND COMMON NAMES
(Hazardous Components 1% or greater; Carcinogens 0.1% or greater)
CAS Number SARA
III LIST
OSHA PEL
(ppm)
ACGIH
TLV (ppm)
Carcinogen
Ref. Source **
ACETONE 67-64-1 No 1000 750 d
HEXANE 110-54-3 Yes 500 50 d
ISOBUTANE / PROPANE BLEND 75-28-5 No 800 800 d
74-98-6 No 1000 1000 d
1
SECTION 2 - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: N/A Specific Gravity (H2O=1): Concentrate Only = 0.853
Vapor Pressure: PSIG @ 70掳F (Aerosols): Max.80 Vapor Pressure (Non-Aerosols)(mm Hg and Temperature): N/A
Vapor Density (Air = 1): N/E Evaporation Rate ( = 1): N/E
Solubility in Water: Partial Water Reactive: No
Appearance and Odor: Straw colored liquid with ketone solvent odor.
SECTION 3 - FIRE AND EXPLOSION HAZARD DATA
FLAMMABILITY as per USA FLAME PROJECTION TEST
(aerosols) EXTREMELY FLAMMABLE
Auto Ignition Temperature
N/E
Flammability Limits in Air by % in Volume:
% LEL: N/E % UEL: N/E
FLASH POINT AND METHOD USED (non-aerosols): N/A
EXTINGUISHER MEDIA: Foam, dry chemical, carbon dioxide, water.
SPECIAL FIRE FIGHTING PROCEDURES: Self-contained breathing apparatus.
Use water fog to cool containers to prevent rupturing & exploding containers.
Provide shielding for personnel.
Unusual Fire & Explosion Hazards: Do not expose aerosols to temperatures above 130掳F or the container may
rupture.
SECTION 4 - REACTIVITY HAZARD DATA
STABILITY [ X ] STABLE [ ] UNSTABLE HAZARDOUS POLYMERIZATION [ ] WILL [ X ] WILL NOT
OCCUR
Incompatibility (Mat. to avoid): Strong oxidizing agents. Conditions to Avoid: Open flame, welding arcs, heat,
sparks.
Hazardous Decomposition Products: Carbon dioxide, carbon monoxide.
SECTION 5 - HEALTH HAZARD DATA
PRIMARY ROUTES OF ENTRY: [ X ] INHALATION [ ] INGESTION [ X] SKIN ABSORPTION [ ] EYE [ ]
NOT HAZARDOUS
ACUTE EFFECTS
Inhalation: Excessive inhalation of vapors can cause nasal & respiratory irritation, dizziness, weakness, nausea,
headache, possible unconsciousness or asphyxiation.
Eye Contact: Irritation. Skin Contact: Irritation due to defatting of skin.
Ingestion: Possible chemical pneumonitis if aspirated into lungs.
CHRONIC EFFECTS: (Effects due to excessive exposure to the raw materials of this mixture)
Excessive inhalation of hexane may cause nerve damage.
Medical Conditions Generally Aggravated by Exposure: May aggravate existing eye, skin, or upper respiratory
conditions.
EMERGENCY FIRST AID PROCEDURES
Eye Contact: Flush with water for 15 minutes. If irritated, seek medical attention.
Skin Contact: Wash with soap and water. If irritated, seek medical attention.
Inhalation: Remove to fresh air. Resuscitate if necessary. Get medical attention.
Ingestion: DO NOT INDUCE VOMITING. Drink two large glasses of water. Get immediate medical attention.
2
SECTION 6 - CONTROL AND PROTECTIVE MEASURES
Respiratory Protection (specify type): If vapor concentration exceeds TLV, use respirator approved by NIOSH in
positive pressure mode.
Protective Gloves: Neoprene. Eye Protection: Safety glasses recommended.
Ventilation Requirements: Adequate ventilation to keep vapor concentration below TLV.
Other Protective Clothing & Equipment: None
Hygienic Work Practices: Wash with soap and water before handling food. Remove contaminated clothing.
SECTION 7 - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps To Be Taken If Material Is Spilled Or Released: Absorb with suitable medium. Incinerate or landfill
according to local, state or federal regulations. DO NOT FLUSH TO SEWER.
Waste Disposal Methods: Aerosol cans when vented to atmospheric pressure through normal use, pose no disposal
hazard.
Precautions To Be Taken In Handling & Storage: Do not puncture or incinerate containers. Do not store at
temperatures above 130掳F.
Other Precautions &/or Special Hazards: KEEP OUT OF REACH OF CHILDREN. Avoid food contamination.
Avoid breathing vapors. Remove ignition sources.
We believe the statements, technical information and recommendations contained herein are reliable, but they are
given without warranty or guarantee of any kind.
** Chemical Listed as Carcinogen or Potential Carcinogen. [a] NTP [b] IARC Monograph [c] OSHA [d] Not
Listed [e] Animal Data Only
Disclaimer
The information contained herein is accurate and reliable as of the date issued to the best of the manufacturer鈥檚
knowledge. ARGCO doesn鈥檛 warrant or guarantee its accuracy or reliability and shall not be liable for any loss or
damage arising from the use thereof. It is the user鈥檚 responsibility to satisfy itself that the information offered for its
consideration is suitable for its particular use.
END OF MATERIAL SAFETY DATA SHEET
3
|