ARCOR庐 Material Safety Data Sheet
EPOXY TECHNOLOGIESTM
ARCOR Epoxy Inc..
Material
PO Box 273 So. Dennis, MA 02660 S-16 Base
Tel:800-878-9593 Fax: 888-878-9593
Date Prepared 08/02/01
Emergency Day: 800-878-9593
Telephone Night: 800-878-9593
ACGIH Other
HAZARDOUS OSHA
CAS Health Hazard Data
TLV
INGREDIENTS PEL
NUMBER
Diglycidyl Ether of 25068-38-6 not not
established established
Bisphenil A
Routes Of Entry
not
not
Skin, Ingestion, Inhalation
established
established
P-tert-ButylPhenyl 3101-60-8
Health Hazards
Glycidyl Ether
Skin: Dermal irritation; Eyes: Eye Irritation
Elastomer Modified 068648-83-9 not
not
Ingestion: Gastrointestinal Irritation
established
established
Bisphenol A based
Inhalation: Respiratory Irritation
Epoxy
Signs and Symptoms of Exposure
Skin: Reddening, Swelling, Rash, Blistering, Scaling
Ingestion: Dizziness, Weakness
Inhalation: Burning in nose & throat, Chest pains
Eyes: Pain, tearing, Reddening, Swelling
Physical/Chemical Characteristics Medical Conditions Aggravated By Exposure
Skin and Eye conditions
Boiling Not Applicable Melting Not Applicable
Emergency and First Aid Procedures
Point Point
Skin: Immediately remove with clean cloth, wash with
Vapor Evaporation
Not Applicable
soap and water. If irritation persists get medical advice.
Negligible
Pressure Rate
Ingestion: DO NOT INDUCE VOMITING.Drink lots of
Vapor Specific water and consult physician immediately.
Not Applicable 1.3 @ 25 C
Density Gravity
Inhalation: If symptoms occur move to fresh air and con-
sult physician immediately.
Solubility in Water insoluble
Eyes: Flush with clean water for 15 minutes. Consult
Color as indicated on label, viscous liquid, mild
Appearance & Odor Physician if irritation persists.
odor
Precautions For Safe Handling and use Precautions For Safe Handling and use
Spillage
Flash Point
Absorb with inert material e.g. earth or sand. Sweep into
>100 C (closed cup)
labeled containers. Flush area with detergent and water.
Flammable Limits
Waste Disposal
LEL: not available UEL: not available
Dispose of in accordance with Federal, State & Local
Extinguishing Media
Regulations
Dry Chemical, Carbon Dioxide, Foam, Water Spray
Precautions For Handling and Storage
Special Fire Fighting Procedures
Store in tightly closed containers in cool dry place. Avoid
Full emergency equipment with self-contained breathing
high temperatures and ignition sources
apparatus and full protective clothing should be worn by
Hygiene Practices
firefighters. No skin should be exposed
Do not eat, drink, smoke when using. Remove contami-
Unusual Fire and Explosion Hazards
nated cloths and wash before reuse. Wash hands and
Decomposition and combustion products may be hazard-
exposed skin with soap and water.
ous.
Reactivity Data Control Measures
Stability
Respiratory Protection
Stable
Not required in normal use. NIOSH respirator if spraying
Stability Conditions To avoid
Ventilation
Not Applicable
When suitable natural ventilation is not available provide
Incompatibility (materials to avoid)
local exhaust ventilation especially when spraying.
Strong Oxidizing Agents, acids, bases
Other Protective Measures
Hazardous Decomposition Products
Provide all workers with permeation resistant gloves (butyl
Carbon Monoxide & Irritating Toxic Fumes
rubber), safety glasses. Cover as much skin as possible.
Hazardous Polymerization
Do not wear contact lenses while handling.
Will not occur
ARCOR庐 Material Safety Data Sheet
EPOXY TECHNOLOGIESTM
ARCOR Epoxy Inc.
Material
PO Box 273 So. Dennis, MA 02660 S-16 Activator
Tel:800-878-9593 Fax: 888-878-9593
Date Prepared 08/02/01
Emergency Day: 800-878-9593
Telephone Night: 800-878-9593
ACGIH Other
HAZARDOUS OSHA
CAS Health Hazard Data
TLV
INGREDIENTS PEL
NUMBER
Alkyl Amines 25620-58-0 not not
established established
Routes Of Entry
not
Polymeric Fatty NJ# 29943300 not
Skin, Ingestion, Inhalation
established
established
Acid Amide 001-5703
Health Hazards
(chemical I.D. trade secret of O.E.M.) Skin: Dermal irritation; Eyes: Eye Irritation
Ingestion: Gastrointestinal Irritation
not not
Benzyl Alcohol 100-51-6 established established
Inhalation: Respiratory Irritation
Less Than 1%
Signs and Symptoms of Exposure
Skin: Reddening, Swelling, Rash, Blistering, Scaling
Ingestion: Dizziness, Weakness
Inhalation: Burning in nose & throat, Chest pains
Eyes: Pain, tearing, Reddening, Swelling
Physical/Chemical Characteristics Medical Conditions Aggravated By Exposure
Skin and Eye conditions
Boiling Not Applicable Melting Not Applicable
Emergency and First Aid Procedures
Point Point
Skin: Immediately remove with clean cloth, wash with
Vapor Evaporation
Not Applicable
soap and water. If irritation persists get medical advice.
Negligible
Pressure Rate
Ingestion: DO NOT INDUCE VOMITING.Drink lots of
Vapor Specific water and consult physician immediately.
Not Applicable 1.1 @ 25 C
Density Gravity
Inhalation: If symptoms occur move to fresh air and con-
Appearance & Odor White, viscous liquid, strong Ammoniacal odor
sult physician immediately.
Eyes: Flush with clean water for 15 minutes. Consult
Solubility in Water partially soluble
Physician if irritation persists.
Precautions For Safe Handling and use Precautions For Safe Handling and use
Spillage
Flash Point
Absorb with inert material e.g. earth or sand. Sweep into
>100 C (closed cup)
labeled containers. Flush area with detergent and water.
Flammable Limits
Waste Disposal
LEL: not available UEL: not available
Dispose of in accordance with Federal, State & Local
Extinguishing Media
Regulations
Dry Chemical, Carbon Dioxide, Foam, Water Spray
Precautions For Handling and Storage
Special Fire Fighting Procedures
Store in tightly closed containers in cool dry place. Avoid
Full emergency equipment with self-contained breathing
high temperatures and ignition sources
apparatus and full protective clothing should be worn by
Hygiene Practices
firefighters. No skin should be exposed
Do not eat, drink, smoke when using. Remove contami-
Unusual Fire and Explosion Hazards
nated cloths and wash before reuse. Wash hands and
Decomposition and combustion products may be hazard-
exposed skin with soap and water.
ous.
Reactivity Data Control Measures
Stability
Respiratory Protection
Stable
Not required in normal use. NIOSH respirator if spraying
Stability Conditions To avoid
Ventilation
Not Applicable
When suitable natural ventilation is not available provide
Incompatibility (materials to avoid)
local exhaust ventilation especially when spraying.
Strong Oxidizing Agents, acids, bases
Other Protective Measures
Hazardous Decomposition Products
Provide all workers with permeation resistant gloves (butyl
Carbon Monoxide & Irritating Toxic Fumes
rubber), safety glasses. Cover as much skin as possible.
Hazardous Polymerization
Do not wear contact lenses while handling.
Will not occur
|