Part Number(s):
MATERIAL SAFETY DATA SHEET 52-777-03
Form WI04-11A Rev. 1
Product Name: Ideal Conditioning Gel Release Date: March 22, 2006
1. Product and Company Identification
Trade Name & Synonyms MSDS Code Number
Ideal Conditioning Gel Refer to part number
Chemical Name Manufacture / Distributor
NA GAC International Inc.
C.A.S. Number Address
7664-38-2 355 Knickerbocker Ave.
Bohemia, NY USA 11716
Grades or Minor Variant Identities Information Telephone Number
NA 1-631-419-1700
Product Use (for Canada) Emergency Telephone Number
Dental etching material. 1-631-419-1700
2. Composition of Ingredients
Hazardous Components PEL TLV C.A.S. Number Exposure Limits %
7664-38-2
1mg/m3/3 mg/m3 NA NA
Phosphoric acid
DOT HAZARD CLASS/ID No: Class 8, III/UN 1805
WHMIS CLASSIFIFCATION: Class E- Corrosive
NFPA HMIS RATING: Health: 3 Flammability: 0
Reactivity: 0
3. Hazard Identification
Emergency Overview
NA
Routes of Signs and Symptoms Single, Repeated, or Severity (Mild, Acute and Chronic Target
Exposure Lifetime Exposure Moderate, Severe) Health Effect(s) Organ(s)
Corrosive. May cause NA NA Summary of Acute hazards: NA
Eye
burns or irritation. Corrosive material. Causes eye and
skin burns. Summary of chronic
hazards: None known
Skin absorption: Slightly NA NA Summary of Acute hazards: NA
Skin
toxic. Skin contact: Corrosive material. Causes skin
Corrosive. May cause burns. May not produce an
burns or irritation. May immediate burning sensation upon
not produce an immediate skin contact, delaying awareness
burning sensation, that contact has occurred.
delaying awareness that Summary of chronic hazards:
contact has occurred. None known
None expected under NA NA NA NA
Inhalation
normal conditions of use
of this product. However,
if inhaled as a mist or
vaporize, it can be
irritating to the
respiratory tract.
Corrosive. Slightly toxic. NA NA NA NA
Ingestion
May cause burns or
irritation to the mouth,
throat or gastrointestinal
tract.
NA NA NA NA
Other
NA
Medical Conditions Aggravated by Exposure
NA
Carcinogenicity (IARC, NTP)
Not known to be a carcinogen. No teratogenicity , mutagenicity, or reproductive toxicity known.
Potential Environmental Effects
NA
Page 1 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 52-777-03
Form WI04-11A Rev. 1
Product Name: Ideal Conditioning Gel Release Date: March 22, 2006
4. First Aid Measures
Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects
Immediately flush with running Get medical care. NA
Eye
water for 15 minutes.
Immediately flush with running Get medical care. NA
Skin
water for 15 minutes.
Remove person to fresh air. Seek medical attention if NA
Inhalation
symptoms persist.
Dilute with water or milk. Do not Get medical attention. NA
Ingestion
induce vomiting.
NA NA NA
Other
Note to Physicians (Treatment, Testing, and Monitoring)
NA
5. Fire and Explosion Data
Flashpoint & Method: Flammable (Explosive) Limits in Air Autoignition Temperature Other
掳C / 掳F Not combustible LEL: N/A UEL: N/A NA
Hazardous combustion
Properties Contributing to Flammability Classification products: Phosphoric acid
Flame Propagation or Burning
Fire Intensity can react with metals to
Health-, Flammability-, Reactivity-NA
NA
liberate hydrogen, a
NA
flammable gas. Combustion
by-products include oxides of
phosphorus.
Extinguishing Media Extinguishing Media to Avoid
Water spray will keep fire-exposed containers cool. Extinguish fire NA
with agent suitable for surrounding fire,
Protection and Procedures for Firefighters
Wear protective clothing and positive pressure self-contained breathing apparatus.
Unusual Fire and Explosion Hazards
NA
6. Accidental Release Measures
Containment Techniques
NA
Spill/Leak Clean-Up Procedures and Equipment
Wear gloves and chemical splash goggles. For small quantities: Absorb spill with dry paper towels. Place all material in chemical waste container
for disposal. Flush spill area with water.
Evacuation Procedures
NA
Special Instructions
Other precautions: Wash thoroughly after handling. Use with adequate ventilation. Keep container closed. Empty container retains vapors and
product residue; observe all safeguards.
Reporting Requirements
NA
7. Handling and Storage
Handling Practices and Warnings
NA
Storage Practices and Warnings
Store tightly closed in cool, dry well-ventilated location away from heat sources and out of direct sunlight. Separate from alkalies and most metals.
Page 2 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 52-777-03
Form WI04-11A Rev. 1
Product Name: Ideal Conditioning Gel Release Date: March 22, 2006
8. Exposure Control/Personal Protection
Ventilation Other Engineering Controls
No special ventilation required under normal conditions of use of this NA
product. For larger quantities, local mechanical exhaust ventilation to
keep TLV<3 mg/m3.
Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies:
Eye/Face Chemically resistant splash goggles. NA
Skin Protective gloves: Chemically resistant gloves. NA
Inhalation Under normal conditions of use of this product, the surgical masks worn NA
by dental staff are adequate. If used invivo, a highs peed evacuation tip
should be used to protect patient. When airborne limits are exceeded, a
NOSH-approved respirator with full-face piece is recommended.
General Hygiene Considerations and Work Practices
Wash thoroughly after handling. Clean protective equipment before reuse.
Protective Measures During Repair and Maintenance of Contaminated Equipment
NA
Other Protective Measures and Equipment
Wear long sleeves, apron or lab coat over clothing, to protect skin. If used in vivo, use rubber dam around tooth to be
etched and high-speed evacuator tip or other protective devices for patient. Mask all surrounding tissue. Emergency
eye wash fountain should be available.
9. Physical and Chemical Characteristics
Appearance Odor
Clear blue gel Characteristic odor.
Boiling Point 135 掳C / 掳F
Normal Physical State:
Liquid Gas
Melting Point 42 掳C / 掳F
Solid GEL (Other) Freezing Point 掳C / 掳F NA
Specific Gravity or Density (H20=1) Solubility in Water pH
1.575 Complete NA
Vapor Pressure (mm Hg @ 20掳C) Vapor Density (AIR= 1) Evaporation Rate (Butyl Acetate = 1)
0.0285 NA NA
Other
Odor threshold: N/A
10. Stability and Reactivity Data
Incompatibility (Materials to Avoid)
Avoid contact with materials such as sulfides and sulfites, which could release toxic gases. Avoid strong alkalies because high heat if reaction can
generate steam. Avoid most metals because phosphoric acid can react to liberate hydrogen, a flammable gas.
Hazardous Products Produced During Decomposition
Toxic gases, steam, hydrogen (flammable), oxides of phosphorus.
Hazardous Polymerization? Conditions to Avoid
掳C / 掳F None
May Occur May Not Occur
Stability? Conditions to Avoid
Stable Unstable 掳C / 掳F None
11. Toxicological Information
Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data
NA
Page 3 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 52-777-03
Form WI04-11A Rev. 1
Product Name: Ideal Conditioning Gel Release Date: March 22, 2006
12. Ecological Information
Toxicity, Environmental Fate, Physical/Chemical Data, or Other Data Supporting Environmental Hazard Statements
NA
13. Disposal Considerations
Regulations
Waste disposal method: Follow all government regulations.
Properties (Physical/Chemical) Affecting Disposal
NA
14. Transport Information
Regulated for shipping? Proper Shipping Name Packing Group
Ideal conditioning gel NA
Yes No
Hazard Class Identification Number
Do changes in quantity, packaging, or shipment method change product classification?
DOT HAZARD NA
Yes No
CLASS NO:
Class 8, 111/ UN
1805
Other
NA
15. Regulatory Information
Federal Regulations
NA
International Regulations
NA
Other
WHMIS CLASSIFICATION: Class E corrosive.
NFPA HMIS RATING: Health 3 Flammability: 0 Reactivity: 0
16. Other Information
Supplier Number: 6/52 Supplier Release: January 1, 2005
N/A = not applicable. NA = not available, N/E = not established. N/D = not determined.
Page 4 of 4
|