Part Number(s):
MATERIAL SAFETY DATA SHEET 59-700-XX
Form WI04-11A Rev. 1
Product Name: Sani Ties .110 Release Date: April 10, 2007
1. Product and Company Identification
Trade Name & Synonyms MSDS Code Number
Loose cut ties (.110) Polyurethane elastomer
Chemical Name Manufacture / Distributor
Polyurethane elastomer. Chemical family: Pellethane Formula: N/A GAC International Inc.
C.A.S. Number Address
058180-53-3 355 Knickerbocker Ave.
Bohemia, NY USA 11716
Grades or Minor Variant Identities Information Telephone Number
NA 1-631-419-1700
Product Use (for Canada) Emergency Telephone Number
NA 1-631-419-1700
2. Composition of Ingredients
Hazardous Components C.A.S. Number Exposure Limits %
058180-53-3 NA 98
Hazardous ingredients: Non-hazardous. NA NA NA
3. Hazard Identification
Emergency Overview
NA
Routes of Signs and Symptoms Single, Repeated, or Severity (Mild, Acute and Chronic Target
Exposure Lifetime Exposure Moderate, Severe) Health Effect(s) Organ(s)
NA NA NA Acute: Mechanical irritation. NA
Eye
Chronic: None
Yes
NA NA NA NA NA
Skin
NA NA NA Acute: Dust may cause minor NA
Inhalation
irritation to respiratory tract.
Yes
Chronic: None
NA NA NA NA NA
Ingestion
NA NA NA NA NA
Other
Medical Conditions Aggravated by Exposure
N/A. Exposure limits: N/A Potential health effects: None known.
Carcinogenicity (IARC, NTP)
None
Potential Environmental Effects
Human effects and symptoms of overexposure:
4. First Aid Measures
Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects
Flush immediately with water for 5 NA NA
Eye
minutes minimum.
Wash off in flowing water. NA NA
Skin
Remove to fresh air. NA NA
Inhalation
No adverse effects. NA NA
Ingestion
NA NA NA
Other
Note to Physicians (Treatment, Testing, and Monitoring)
NA
Page 1 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 59-700-XX
Form WI04-11A Rev. 1
Product Name: Sani Ties .110 Release Date: April 10, 2007
5. Fire and Explosion Data
Flashpoint & Method: Flammable (Explosive) Limits in Air Autoignition Temperature Other
掳C / 掳F N/A LEL: N/A UEL: N/A NA
NA
Properties Contributing to Flammability Classification
Flame Propagation or Burning
Fire Intensity Health- 1, Flammability-1 , Reactivity-
NA
NA 0
Extinguishing Media Extinguishing Media to Avoid
Water fog, foam, CO2, dry chemical. NA
Protection and Procedures for Firefighters
N/A
Unusual Fire and Explosion Hazards
NA
6. Accidental Release Measures
Containment Techniques
NA
Spill/Leak Clean-Up Procedures and Equipment
Sweep up and dispose.
Evacuation Procedures
NA
Special Instructions
NA
Reporting Requirements
NA
7. Handling and Storage
Handling Practices and Warnings
Store in sealed containers. Other notes: N/A
Storage Practices and Warnings
(掳C / 掳F). Storage temperature: Ambient.
Shelf life: None. Special sensitivite: Moisture.
8. Exposure Control/Personal Protection
Ventilation Other Engineering Controls
Good general ventilation NA
Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies:
Eye/Face Safety glasses NA
Skin None NA
Inhalation None NA
General Hygiene Considerations and Work Practices
NA
Protective Measures During Repair and Maintenance of Contaminated Equipment
NA
Other Protective Measures and Equipment
NA
Page 2 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 59-700-XX
Form WI04-11A Rev. 1
Product Name: Sani Ties .110 Release Date: April 10, 2007
9. Physical and Chemical Characteristics
Appearance Odor
Clear colorless to yellow (multi colors, FDA approved colorants) Odorless
Boiling Point 掳C / 掳F N/A
Normal Physical State:
Liquid Gas
Melting Point 掳C / 掳F N/A
Solid NA (Other) Freezing Point 掳C / 掳F N/A
Specific Gravity or Density (H20=1) Solubility in Water pH
1.15 鈥? 1.25 Insoluble N/A
Vapor Pressure (mm Hg @ 20掳C) Vapor Density (AIR= 1) Evaporation Rate (Butyl Acetate = 1)
N/A NA NA
Other
Bulk density: N/A. % Volatile by volume: N/.A
10. Stability and Reactivity Data
Incompatibility (Materials to Avoid)
None known.
Hazardous Products Produced During Decomposition
Carbon monoxide, carbon dioxide, traces of Hydrogen cyanide
Hazardous Polymerization? Conditions to Avoid
掳C / 掳F NA
May Occur May Not Occur N/A
Stability? Conditions to Avoid
Stable Unstable NA Avoid excessive pressures about 500 掳F Instability conditions:
None
11. Toxicological Information
Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data
None
12. Ecological Information
Toxicity, Environmental Fate, Physical/Chemical Data, or Other Data Supporting Environmental Hazard Statements
None
13. Disposal Considerations
Regulations
Waste disposal method: Incinerate or dispose in an approved landfill.
Properties (Physical/Chemical) Affecting Disposal
NA
Page 3 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 59-700-XX
Form WI04-11A Rev. 1
Product Name: Sani Ties .110 Release Date: April 10, 2007
14. Transport Information
Regulated for shipping? Proper Shipping Name Packing Group
NA NA
Yes No NA
Hazard Class Identification Number
Do changes in quantity, packaging, or shipment method change product classification?
NA NA
Yes No NA
Other
Technical shipping name: None.
Freight class bulk:
Freight class package:
Product label:
Hazard class or division:
Hazard class division number:
15. Regulatory Information
Federal Regulations
SARA Title III (In raw form) Section 302 Extremely hazardous substances: None. Section 311/312 Hazard categories: None. Section 313 Toxic
chemicals: None. RERA Status: None.
International Regulations
NA
Other
HMIS RATINGS: Health : 1 Flammability: 1 Reactivity: 0
0=minimal, 1=slight, 2=moderate, 3=serious, 4=severe.
16. Other Information
Supplier Number: 31/59 Supplier Release: NA
N/A = not applicable. NA = not available, N/E = not established. N/D = not determined.
Page 4 of 4
|